TestReport

FCC ID: CFS8DL6160RF-3

Test Report

Download: PDF
FCCID_4480044

849 NW STATE ROAD 45 PHONE: 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: INFO@TIMCOENGR.COM WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company FCC PART 15.231 & IC RSS-210 Momentary Transmitter Test Report APPLICANT ADEMCO INC. 2 Corporate Center Drive ADDRESS Melville NY 11747 USA FCC ID CFS8DL6160RF-3 IC 573F-6160RF3 MODEL NUMBER 6160RF VE PRODUCT DESCRIPTION WIRELESS KEYPAD DATE SAMPLE RECEIVED 08/01/2019 FINAL TEST DATE 08/12/2019 TESTED BY Tim Royer APPROVED BY Franklin Rose TEST RESULTS ☒ PASS ☐ FAIL Report Number Report Version Description Issue Date Rev1 Initial Issue 08/12/2019 1989UT19TestReport_ Rev2 Added emission plots 10/09/2019 THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

TABLE OF CONTENTS GENERAL REMARKS ........................................................................................................ 2 GENERAL INFORMATION ................................................................................................ 3 EUT INFORMATION .............................................................................................................. 3 PERIPHERALS USED IN TESTING ............................................................................................... 3 FREQUENCY RANGE OF EUT .................................................................................................... 3 DEFINITION OF EUT............................................................................................................. 4 MEASUREMENT STANDARDS ............................................................................................. 5 METHOD OF MEASUREMENT .............................................................................................. 6 SUMMARY OF TESTING ................................................................................................... 7 FIELD STRENGTH OF EMISSIONS ................................................................................... 8 MEASUREMENT RANGE ........................................................................................................ 13 LIMIT CALCULATIONS ......................................................................................................... 15 TEST DATA: ANT 1 FIELD STRENGTH OF THE FUNDAMENTAL TABLE .................................................. 16 TEST DATA: ANT 1 EMISSIONS FROM 9 KHZ TO THE 10TH HARMONIC OF THE FUNDAMENTAL TABLE ........... 16 TEST DATA: ANT 1 FIELD STRENGTH PLOT ............................................................................... 16 TEST DATA: ANT 2 FIELD STRENGTH OF THE FUNDAMENTAL TABLE .................................................. 17 TEST DATA: ANT 2 EMISSIONS FROM 9 KHZ TO THE 10TH HARMONIC OF THE FUNDAMENTAL TABLE ........... 17 TEST DATA: ANT 2 FIELD STRENGTH PLOT ............................................................................... 17 TEST EQUIPMENT LIST ................................................................................................. 18 OCCUPIED BANDWIDTH ............................................................................................... 19 TEST DATA: OCCUPIED BANDWIDTH MEASUREMENT TABLE ........................................................... 19 TEST DATA: 20 DB OCCUPIED BANDWIDTH PLOT ...................................................................... 20 TEST DATA: 99% OCCUPIED BANDWIDTH PLOT ....................................................................... 21 POWER LINE CONDUCTED INTERFERENCE ................................................................... 22 TEST DATA: LINE 1 PEAK PLOT TABLE .................................................................................... 23 TEST DATA: LINE 2 PEAK PLOT TABLE .................................................................................... 24 MEASUREMENT UNCERTAINTY ..................................................................................... 25

GENERAL REMARKS Summary The device under test does: ☒ Fulfill the general approval requirements as identified in this test report and was selected by the customer. ☐ Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Tested by: Name and Title: Tim Royer, Project Manager/Testing Engineer Date: 09/07/2019 Reviewed and approved by: Name and Title: Franklin Rose, Project Manager/EMC Specialist Date: 09/13/2019 Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 2 of 25

GENERAL INFORMATION EUT Information EUT Description WIRELESS KEYPAD FCC ID CFS8DL6160RF-3 IC 573F-6160RF3 Model Number 6160RF VE EUT Power Source ☒110–120Vac, 50– ☐ DC Power ☐ Battery 60Hz (12V) Operated Test Item ☐ Prototype ☒ Pre- ☐ Production Production Type of Equipment ☒ Fixed ☐ Mobile ☐ Portable Antenna Connector No Antenna Connector The temperature was 26ºC Test Conditions Relative humidity of 50%. Modification to the EUT EUT was modified to include a BNC antenna connector. FCC CFR 47 Part 2, Part 15, RSS-GEN Issue 5, RSS-210, Issue 9 Applicable Standards August 2016 Referring to ANSI C63.10-2013 for Test Procedures Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL Test Facility 32669 USA. Designation #: US1070 IC Test Site: 2056A Peripherals Used in Testing Description Type Connector Length NA Frequency Range of EUT Test Frequencies 345 MHz Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 3 of 25

Definition of EUT FCC RULE PART NO.: FCC PART 15.3 IC RULE PART NO.: RSS-GEN, Section 2.6.1 Note: The device is a momentarily operated transmitter. Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 4 of 25

MEASUREMENT STANDARDS FCC RULE PART NO.: FCC PART 15.31 IC RULE PART NO.: RSS-GEN 3.2 Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 5 of 25

METHOD OF MEASUREMENT FCC RULE PART NO.: FCC PART 15.35 IC RULE PART NO.: RSS-GEN Section 8.1 Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 6 of 25

SUMMARY OF TESTING FCC Rule Requirement IC Rule Part No. Test Item Result Part No. FCC PT 2.1053, 15.231(b), RSS-GEN 8.9, 8.10, Radiated Field 15.209(a), RSS-210 4.1, Strength of Pass RSS-GEN 6.7 15.205(a), (b) RSS-210 Annex 1, 1.2 Spurious Emissions Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 7 of 25

FIELD STRENGTH OF EMISSIONS Requirements: FCC PT 2.1046, 2.1053, RSS-GEN 6.12, 6.7 FCC RULE PART NO.: 15.231(b), 15.35(c), 15.205(a)(b), 15.209 (a) Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 8 of 25

FIELD STRENGTH OF EMISSIONS Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 9 of 25

A.1.2 Field Strengths Following are the requirements for field strength of emissions: a. The field strength of emissions from momentarily operated intentional radiators shall not exceed the limits outlined in Table A1, based on the average value of the measured emissions. The requirements of the Pulsed Operation section of RSS—Gen apply for averaging pulsed emissions and limiting peak emissions. Alternatively, compliance with the limits in Table A1 may be demonstrated using an International Special Committee on Radio Interference (CISPR) quasi—peak detector. b. Unwanted emissions shall be 10 times below the fundamental emissions field strength limits in Table A1 or comply with the limits specified in RSS—Gen, whichever is less stringent. Table A1— Permissible Field Strength Limits for Momentarily Operated Devices Fundamental Frequency (MHz), Excluding Restricted Field Strength of the Fundamental Frequency Bands Specified in RSS—Gen Emissions (fiVim at 3 m) 70—130 1,250 130—174 1,250 to 3,750% 174—260 (e#") 3,750 260—479 Ne# 3,750 to 12,500" Above 470 12,500 * Linearinterpolation with frequency, 1, in MHz: For 130—174 MHz: Field Strength (uV/m) = (56.82 x 1)—6136 For 260—470 MHz: Field Strength (uV/m) = (41.67 x 1)—7083 8.2 Pulsed operation When the field strength or envelope poweris not constant or it is in pulses, and an average detector is specified to be used, the value offield strength or power shall be determined by averaging over one complete pulse train during which the field strength or power is at its maximum value, including blanking intervals within the pulse train, provided that the pulse train does not exceed 0.1 seconds. In cases where the pulse train exceeds 0.1 seconds, the average value of field strength or output power shall be determined during a 0.1 seconds interval during which the field strength or power is at its maximum value. The exact method of calculating the average field strength shall be described in the test report. For pulse modulated devices with a pulse—repetition frequency of 20 Hz or less and for which CISPR quasi—peak measurements are specified, compliance shall be demonstrated using measuring instrumentation employing a peak detector function, properly adjusted for such factors as pulse desensitization, using the same measurement bandwidths that are indicated for CISPR quasi—peak measurements. eoprucess ww cce a s rcarervipem sccraiy e begye av vr es

FIELD STRENGTH OF EMISSIONS Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 11 of 25

FIELD STRENGTH OF EMISSIONS Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 12 of 25

FIELD STRENGTH OF EMISSIONS Measurement Range Requirements: Part 15.33(b)(1), RSS-GEN Section 6.13.2 RSS-GEN Section 6.13.2: Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 13 of 25

FIELD STRENGTH OF EMISSIONS Method of Measurement: ANSI C63.10, 6.3 – 6.6 “Radiated Emissions” Test Site Setup: EUT Orientation(s): Note: The measurements below represent the worst case of all the frequencies tested. The six (6) highest emissions or more of each worst-case operational modes of the EUT are represented below. Emissions 20 dB below the limit are not required to be reported, but may be shown for informational purposes. Formula of Conversion Factors: The field strength at 3m was established by adding the meter reading of the spectrum analyzer to the antenna correction factor supplied by the antenna manufacturer plus the coax loss. The antenna correction factors are stated in terms of dB/m. The gain of the preselector was accounted for internally in the spectrum analyzer reading. An example is given below: Field Meter Freq. ACF Cable Loss Strength Reading Duty Cycle MHz dB/m dB dBμV/m @ 3 dBμV dB m 334 20 +10 +1 -20 = +12 Note: -20dB Duty cycle correction factor is derived from a 10% duty cycle provided by the manufacturer. Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 14 of 25

FIELD STRENGTH OF EMISSIONS Limit Calculations Method of Calculation: ANSI C63.10, 7.6.2 Step 1: Limit Interpolation Formula: Limit (µV/m) = Ll + (f – fl)*((Lh - Ll)/(fh-fl)) Where: f = fundamental emission frequency (MHz) fl = Low-End frequency of the linear interpolation band (MHz) fh = High-End frequency of the linear interpolation band (MHz) Ll = Low-End Limit of the linear interpolation band (µV/m) Lh = High-End Limit of the linear interpolation band (µV/m) Step 2: Limit Conversion Formula: Limit (dBµV/m) = 20 log (µV/m) 15.231(b), RSS-210 A.1.2 - Limit Lookup Chart Fundamental Frequency 345 (MHz) Limit Fundamental Spurious Frequency Field Strength Field Strength (MHz) (dBuV/m) (dBuV/m) 345.00 77.26 57.26 Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 15 of 25

FIELD STRENGTH OF EMISSIONS Test Data: Ant 1 Field Strength of the Fundamental Table Antenna Tuned Meter Duty Cycle Field 15.231 Antenna Coax Loss Correction Frequency Detector Reading Correction Distance (m) Strength Fundamental Margin (dBm) Polarity (dB) Factor (MHz) (dBµV) (dB) (dBµV/m) Limit (dB/m) 345.00 PK 71.58 H 2.12 -20.00 13.70 3.00 67.40 77.26 9.86 345.00 PK 72.53 V 2.12 -20.00 13.70 3.00 68.35 77.26 8.91 Test Data: Ant 1 Emissions from 9 KHz to the 10th harmonic of the Fundamental Table 15.205, Antenna Tuned Emission 15.205 Meter Duty Cycle Field 15.231 15.35, Antenna Coax Loss Correction Margin Frequency Frequency Restricted Reading Correction Distance (m) Strength Spurious 15.247(d) Polarity (dB) Factor (dBm) (MHz) (MHz) Band (dBµV) (dB) (dBµV/m) Limit Detector (dB/m) 345.00 690.00 PK 20.76 V 3.07 -20.00 20.40 3.00 24.23 57.26 33.03 345.00 690.00 PK 29.48 H 3.07 -20.00 20.40 3.00 32.95 57.26 24.31 345.00 1035.00 X PK 14.47 V 3.76 -20.00 26.86 3.00 25.09 57.26 32.17 345.00 1035.00 X PK 19.88 H 3.76 -20.00 26.86 3.00 30.50 57.26 26.76 345.00 1380.00 X PK 3.45 V 4.30 -20.00 28.58 3.00 16.33 57.26 40.92 345.00 1380.00 X PK 8.38 H 4.30 -20.00 28.58 3.00 21.26 57.26 35.99 345.00 1725.00 PK 5.82 V 4.81 -20.00 29.40 3.00 20.03 57.26 37.22 345.00 1725.00 PK 8.00 H 4.81 -20.00 29.40 3.00 22.21 57.26 35.04 345.00 2070.00 PK -0.93 V 5.31 -20.00 31.00 3.00 15.38 57.26 41.87 345.00 2070.00 PK 0.00 H 5.31 -20.00 31.00 3.00 16.31 57.26 40.94 345.00 2415.00 PK 7.17 V 5.61 -20.00 31.87 3.00 24.65 57.26 32.61 345.00 2415.00 PK 6.29 H 5.61 -20.00 31.87 3.00 23.77 57.26 33.49 345.00 2760.00 X PK -1.09 V 6.11 -20.00 32.41 3.00 17.43 57.26 39.82 345.00 2760.00 X PK 3.59 H 6.11 -20.00 32.41 3.00 22.11 57.26 35.14 345.00 3105.00 PK 1.36 V 6.45 -20.00 32.77 3.00 20.58 57.26 36.68 345.00 3105.00 PK -0.55 H 6.45 -20.00 32.77 3.00 18.67 57.26 38.59 345.00 3450.00 PK 0.34 V 6.88 -20.00 32.59 3.00 19.82 57.26 37.44 345.00 3450.00 PK -0.22 H 6.88 -20.00 32.59 3.00 19.26 57.26 38.00 * -Denotes restricted bands which must comply with limits 15.209 Note: Emissions that are 20 dB below the limit are not required to be reported. Test Data: Ant 1 Field Strength Plot Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 16 of 25

RADIATED SPURIOUS EMISSIONS Test Data: Ant 2 Field Strength of the Fundamental Table Antenna Tuned Meter Duty Cycle Field 15.231 Antenna Coax Loss Correction Frequency Detector Reading Correction Distance (m) Strength Fundamental Margin (dBm) Polarity (dB) Factor (MHz) (dBµV) (dB) (dBµV/m) Limit (dB/m) 345.00 PK 77.30 H 2.12 -20.00 13.70 3.00 73.12 77.26 4.14 345.00 PK 69.79 V 2.12 -20.00 13.70 3.00 65.61 77.26 11.65 Test Data: Ant 2 Emissions from 9 KHz to the 10th harmonic of the Fundamental Table 15.205, Antenna Tuned Emission 15.205 Meter Duty Cycle Field 15.231 15.35, Antenna Coax Loss Correction Margin Frequency Frequency Restricted Reading Correction Distance (m) Strength Spurious 15.247(d) Polarity (dB) Factor (dBm) (MHz) (MHz) Band (dBµV) (dB) (dBµV/m) Limit Detector (dB/m) 345.00 690.00 PK 22.60 V 3.07 -20.00 20.40 3.00 26.07 57.26 31.19 345.00 690.00 PK 33.64 H 3.07 -20.00 20.40 3.00 37.11 57.26 20.15 345.00 1035.00 X PK 14.42 V 3.76 -20.00 26.86 3.00 25.04 57.26 32.22 345.00 1035.00 X PK 20.50 H 3.76 -20.00 26.86 3.00 31.12 57.26 26.14 345.00 1380.00 X PK -1.83 V 4.30 -20.00 28.58 3.00 11.05 57.26 46.20 345.00 1380.00 X PK -1.58 H 4.30 -20.00 28.58 3.00 11.30 57.26 45.95 345.00 1725.00 PK 4.72 V 4.81 -20.00 29.40 3.00 18.93 57.26 38.32 345.00 1725.00 PK 10.74 H 4.81 -20.00 29.40 3.00 24.95 57.26 32.30 345.00 2070.00 PK -0.96 V 5.31 -20.00 31.00 3.00 15.35 57.26 41.90 345.00 2070.00 PK -0.78 H 5.31 -20.00 31.00 3.00 15.53 57.26 41.72 345.00 2415.00 PK 11.66 V 5.61 -20.00 31.87 3.00 29.14 57.26 28.12 345.00 2415.00 PK 14.45 H 5.61 -20.00 31.87 3.00 31.93 57.26 25.33 345.00 2760.00 X PK 7.28 V 6.11 -20.00 32.41 3.00 25.80 57.26 31.45 345.00 2760.00 X PK 1.96 H 6.11 -20.00 32.41 3.00 20.48 57.26 36.77 345.00 3105.00 PK 4.33 V 6.45 -20.00 32.77 3.00 23.55 57.26 33.71 345.00 3105.00 PK 8.24 H 6.45 -20.00 32.77 3.00 27.46 57.26 29.80 345.00 3450.00 PK -0.18 V 6.88 -20.00 32.59 3.00 19.30 57.26 37.96 345.00 3450.00 PK 3.85 H 6.88 -20.00 32.59 3.00 23.33 57.26 33.93 * -Denotes restricted bands which must comply with limits 15.209 Note: Emissions that are 20 dB below the limit are not required to be reported. Test Data: Ant 2 Field Strength Plot Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 17 of 25

TEST EQUIPMENT LIST Serial Cal/Char Device Manufacturer Model Due Date Number Date Antenna: Biconical Eaton 94455-1 1096 08/01/17 08/01/20 1096 Antenna: Log-Periodic Electro-Metrics LPA-25 1243 03/29/18 03/29/20 1243 CHAMBER Panashield 3M N/A 12/31/17 12/31/19 Antenna: Double- Ridged ETS-Lindgren 3117 00041534 03/01/17 03/01/20 Horn/ETS Horn 2 Software: Version Field Strength Timco N/A N/A N/A 4.10.7.0 Program Antenna: ETS-Lindgren 6502 00062529 12/11/17 12/11/19 Active Loop EMI Test Receiver R & Rohde & ESU 40 100320 08/28/18 08/28/21 S ESU 40 Schwarz Chamber KMKM-0244- Coaxial Cable Chamber 3 01; KMKM- - Chamber 3 Micro-Coax cable set 0670-00; 02/29/19 02/29/21 cable set (Primary) KFKF-0198- (Primary) 01 Bore-sight Antenna Sunol Sciences TLT2 N/A N/A N/A Positioning Tower *EMI RECEIVER SOFTWARE VERSION The receiver firmware used was version 4.43 Service Pack 3 Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 18 of 25

OCCUPIED BANDWIDTH FCC Rules Part No.: 15.231(C), & 15.215(c) IC RSS: 210 § A1.1.3, & GEN § 6.6 Requirements: The bandwidth of the emission shall fall completely inside the band of operation, and be no wider than .25% of the center frequency for devices operating between 70 and 900 MHz. For FCC compliance the Bandwidth is determined at the points 20 dB down from the modulated carrier. For IC compliance the Bandwidth is determined as the 99% power bandwidth. Test Method: ANSI C63.10 § 6.9.2 Occupied bandwidth Relative procedure ANSI C63.10 § 6.9.3 Occupied bandwidth 99% Power Test Data: Occupied Bandwidth Measurement Table Measured Measured 99% Tuned Frequency Limit 20 dB BW BW (MHz) (KHz) (KHz) (KHz) 344.94 862.35 33.86 48.18 Margin (KHz) 828.49 814.17 Results Meet Requirement Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 19 of 25

OCCUPIED BANDWIDTH Test Data: 20 dB Occupied Bandwidth Plot 20 dB BW =33.86kHz * RBW 1 kHz Delta 2 [T1 ] * VBW 3 kHz -1.48 dB Ref -20 dBm Att 10 dB SWT 145 ms 33.866850616 kHz -20 Marker 1 [T1 ] -59.62 dBm * 344.953409414 MHz A -30 1 RM * VIEW -40 -50 1 2 -60 D1 -60.16 dBm -70 3DB -80 AC -90 -100 -110 -120 Center 344.9686381 MHz 14.18316429 kHz/ Span 141.8316429 kHz Date: 7.SEP.2019 12:58:50 Results Meet Requirements Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 20 of 25

OCCUPIED BANDWIDTH Test Data: 99% Occupied Bandwidth Plot 99% BW =48.18kHz * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -40.16 dBm Ref -20 dBm Att 5 dB SWT 145 ms 344.968638133 MHz -20 OBW 48.186391484 kHz Temp 1 [T1 OBW] -66.54 dBm A -30 344.946363291 MHz 1 RM * Temp 2 [T1 OBW] 1 VIEW -40 -68.33 dBm 344.994549683 MHz -50 -60 T1 T2 -70 3DB -80 AC -90 -100 -110 -120 Center 344.9686381 MHz 14.18316429 kHz/ Span 141.8316429 kHz Date: 7.SEP.2019 12:57:36 Results Meet Requirements Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 21 of 25

POWER LINE CONDUCTED INTERFERENCE Rule Part No.: FCC Part 15.107 Requirements: Quasi Peak Limits Frequency MHz Average Limits (dBµV) (dBµV) 0.15 – 0.5 66 – 56 * 56 – 46 * 0.5 – 5.0 56 46 5.0 – 30 60 50 * Limit decreases with logarithm of frequency Method of Measurement: The procedure used was ANSI C63.4 using a 50uH LISN. Both lines were observed. The bandwidth of the spectrum analyzer was 10 kHz with an appropriate sweep speed. The spectrum was scanned from 0.15 to 30 MHz. The following plots represent the emissions for power line conducted. Both lines were observed. Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 22 of 25

POWER LINE CONDUCTED INTERFERENCE Test Data: Line 1 Peak Plot Table Results Meets Requirements Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 23 of 25

POWER LINE CONDUCTED INTERFERENCE Test Data: Line 2 Peak Plot Table Results Meets Requirements Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 24 of 25

MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The measurement uncertainty was calculated for all measurements listed in this test report according To CISPR 16–4 or ENTR 100-028 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: “Uncertainty in EMC Measurements” and is documented in the Timco Engineering, Inc. quality system according to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Timco Engineering, Inc. is reported: Test Items Measurement Uncertainty Notes RF Frequency Accuracy ± 49.5 Hz (1) RF Conducted Power ±0.93dB (1) Conducted spurious emission of transmitter ±1.86dB valid up to 40GHz Occupied Bandwidth ±2.65% Radiated RF Power ±1.4dB Maximum frequency deviation: Within 300 Hz and 6kHz of audio freq. ±1.88% Within 6kHz and 25kHz of audio Freq. ±2.04% Transient Frequency Response ±1.88% Temperature ±1.0°C (1) Humidity ±5.0% (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=1.96. END OF REPORT Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 25 of 25

Report Template Revision History Revision Document Name Description of Change Approved By Date Initial Issue 160415 SS Sanders PT 15231a TX Rpt Added Document History to Template 160920 G Greene Added Uc Tab & Note about Quality 170524 SS Sanders Check. Revised Template to new company _15.231_TestReport_ 180720 FROSE standards \\timco-file\tesys2\TimcoOffice\Templates\TestReports\FCC\UnlicensedDevices\PT 15109 Ver Rpt_160920.docx Applicant: ADEMCO INC. FCC ID: CFS8DL6160RF-3 IC: 573F-6160RF3 Report: 1989UT19TestReport_Rev2 Page 26 of 25

Radiated Emissions Test Setup Photographs Radiated Emissions Scan 200 MHz to 1 GHz (Log-Periodic Antenna)

Radiated Emissions Test Setup Photographs Radiated Emissions Scan above 1 GHz (Waveguide Antenna)



Document Created: 2019-10-16 04:06:53
Document Modified: 2019-10-16 04:06:53
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC