MPE Report

FCC ID: CFS-8DL6CTAR1

RF Exposure Info

Download: PDF
FCCID_4360765

849 NW STATE ROAD 45 PHONE: 888.472.2424 OR 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: INFO@TIMCOENGR.COM WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company RF Exposure Evaluation Report APPLICANT ADEMCO INC. 2 CORPORATE CENTER DRIVE SUITE 100 ADDRESS PO BOX 9040 MELVILLE NY 11747 FCC ID CFS-8DL6CTAR1 MODEL NUMBER SiXCTA, SiXCT PRODUCT DESCRIPTION WIRELESS DOOR/WINDOW CONTACT DATE SAMPLE RECEIVED 06/04/2019 FINAL TEST DATE 06/07/2019 PREPARED BY Tim Royer TEST RESULTS PASS FAIL Report Number Report Version Description Issue Date 1422AUT19 Rev1 Initial Issue 07/17/2019 MPE_TestReport_ THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

TABLE OF CONTENTS GENERAL REMARKS ........................................................................................................ 2 GENERAL INFORMATION ................................................................................................ 3 ANTENNA INFORMATION ............................................................................................... 3 MPE CALCULATION ......................................................................................................... 4 MPE LIMITS .................................................................................................................... 4 MPE TABLE ..................................................................................................................... 5 GENERAL UNCONTROLLED EXPOSURE ......................................................................................... 5

GENERAL REMARKS Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Designation #: US1070 Prepared by: Name and Title Tim Royer, Project Manager / EMC Testing Engineer Date 06/7/2019 Applicant: ADEMCO INC FCC ID: CFS-8DL6CTAR1 Report: 1422AUT19 MPE_TestReport_Rev1 Page 2 of 5

GENERAL INFORMATI ON EUT Description WIRELESS DOOR/WINDOW CONTACT Model Number SIXCTA, SIXCT C110—120 Vac, 50— EUT Power Source C DC Power Battery Operated 60Hz J Engineering Test Item Protetype Pre—Production C Production Type of Equipment Fixed C Mobile C Portable Antenna Connector Integrated The temperature was 26°C Test Conditions Relative humidity of 50% . Modification to the EUT No Modification to EUT. Applicable Standards FCC CFR 47 Part 2.1091 Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL Test Facility 39569 USA. Designation #: US1070 ANTENNA I NFORMATI ON Manufacturer Provides Type Max Gain Antenna yP (dBi) Yes Unspecitied 0 dBi SISO Statement This equipment has two separate outputs meant to be used as SISO for different service areas. For such equipment, FCC KDB 935210 D02 asks for the following grant condition to be used "This filing has compliance demonstration information and test data only for SISO (single— input single—output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple—input multiple—output) industrial booster systems." Applicant: ADEMCO INC FCC ID: CFS—8DLGCTAR1 Report: 1422AUT19 MPE_TestReport_Revi Page 3 of 5

MPE CALCULATION The minimum separation distance is calculated as follows: 2 30x PxG E E(V / m) = —————— Power density: Pd[mchmz)=— d 3770 MPE LI MITS Figure 1. FCC Limits for Maximum Permissible Exposure (MPE) Plane—wave Equivalent Power Density 1,000 TT T T To T T Occupational/Contralled Exposure = General Population/Uncontrolled Exposure 100}— — = 2 ; 10 7| € 5 1 1— 4 o2l —4 0.1 1 1_1 i 1 i _1 1 1 003 0.3 I 3 30 300 I.s.auu $0,000 + 300,000 1.34 1600 100,000 Frequency (MHz) Applicant: ADEMCO INC FCC ID: CFS—8DL6CTAR1 Report: 1422AUT19 MPE_TestReport_Revi Page 4 of 5

MPE Table General Uncontrolled Exposure The limit for General Uncontrolled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table B: Variable Value Max Power 0.079 W Frequency Range 2405 - 2445 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dB Coax Loss 0 dB Power Density 1 mW/cm2 Minimum Separation Distance 2.51 cm Applicant: ADEMCO INC FCC ID: CFS-8DL6CTAR1 Report: 1422AUT19 MPE_TestReport_Rev1 Page 5 of 5


Document Created: 2019-07-18 03:21:34
Document Modified: 2019-07-18 03:21:34
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC