Test Report

FCC ID: CCW501

Test Report

Download: PDF
FCCID_666384

ETC Report No. : 06-03-MAS-244-01 Sheet 1 of 23 Sheets FCC ID.: CCW501 CONFORMANCE TEST REPORT FOR FCC 47 CFR, Part 15 Subpart C Report No.: 06-03-MAS-244-01 Client: Atlantic Guest Inc Product: Wireless Control for 501 spotlight Model: Guest No.728295 FCC ID: CCW501 Manufacturer/supplier: Atlantic Guest Inc Date test item received: 2006/03/24 Date test campaign completed: 2006/04/27 Date of issue: 2006/05/23 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 23 pages Total number of pages of photos: External photos 1 pages Internal photos 3 pages Setup photos 2 pages Test Engineer Checked By Approved By Jeng De Hsu James Joe Hsieh ELECTRONICS TESTING CENTER, TAIWAN TEL: (03) 3276170~4 NO.8, LANE 29, WENMING RD., INT: +886-3-3276170~4 LESHAN TSUEN, GUISHAN SHIANG, FAX: (03) 3276188 TAOYUAN COUNTY, TAIWAN 33383, R.O.C. INT: +886-3-3276188 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 2 of 23 Sheets FCC ID.: CCW501 Client : Atlantic Guest Inc Address : 95 research parkway,Meriden 06450,U.S.A. Manufacturer : Atlantic Guest Inc Address : 95 research parkway,Meriden 06450,U.S.A. EUT : Wireless Control for 501 spotlight Trade name : Guest Model No. : Guest No.728295 Power Source : 12V DC Regulations applied : FCC 47 CFR, Part 15 Subpart C (2005) The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. The compliance test is only certified for the test equipment and the results of the testing report relate only to the item tested. The compliance test of this report was conducted in accordance with the appropriate standards. It’s not intention to assure the quality and performance of the product. This report shall not be reproduced except in full, without the approval of ETC. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Laboratory Introduction: Electronics Testing Center, Taiwan is recognized, filed and mutual recognition arrangement as following: 1 ISO9001: TüV Product Service 2 ISO/IEC 17025: BSMI, CNLA, DGT, NVLAP, CCIBLAC, UL, Compliance 3 Filing: FCC, Industry Canada, VCCI 4 MRA: Australia, Hong Kong, New Zealand, Singapore, USA, Japan, Korea, China, APLAC through CNLA 5 FCC Registration Number: 90588, 91094, 91095 NVLAP Lab Code 200133-0 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 3 of 23 Sheets FCC ID.: CCW501 Table of Contents Page 1. GENERAL INFORMATION ...................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION ................................................................................................................................................. 4 1.2 CHARACTERISTICS OF DEVICE: ...................................................................................................................................... 4 1.3 TEST METHODOLOGY .................................................................................................................................................... 4 1.4 TEST FACILITY ............................................................................................................................................................... 4 2. DEFINITION AND LIMITS........................................................................................................................................ 5 2.1 DEFINITION .................................................................................................................................................................... 5 2.2 RESTRICTED BANDS OF OPERATION ............................................................................................................................... 5 2.3 LIMITATION .................................................................................................................................................................... 6 2.4 LABELING REQUIREMENT .............................................................................................................................................. 7 2.5 USER INFORMATION....................................................................................................................................................... 7 3. RADIATED EMISSION MEASUREMENT.............................................................................................................. 8 3.1 APPLICABLE STANDARD................................................................................................................................................. 8 3.2 MEASUREMENT PROCEDURE ......................................................................................................................................... 8 3.3 TEST DATA .................................................................................................................................................................. 10 3.4 FIELD STRENGTH CALCULATION .................................................................................................................................. 13 3.5 RADIATED TEST EQUIPMENT ....................................................................................................................................... 13 3.6 MEASURING INSTRUMENT SETUP................................................................................................................................. 18 4. BANDWIDTH OF EMISSION.................................................................................................................................. 19 4.1 APPLICABLE STANDARD PLOT GRAPHIC OF BANDWIDTH ............................................................................................. 19 4.2 TEST EQUIPMENT ......................................................................................................................................................... 19 4.3 TEST RESULT ............................................................................................................................................................... 19 5. CONDUCTED EMISSION MEASUREMENT ........................................................................................................ 21 6. LIMIT OF TRANSMISSION TIME.......................................................................................................................... 22 6.1 APPLICABLE STANDARD................................................................................................................................................ 22 6.2 ACTIVE TIME ................................................................................................................................................................ 22 6.3 TEST EQUIPMENT .......................................................................................................................................................... 22 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 4 of 23 Sheets FCC ID.: CCW501 1. GENERAL INFORMATION 1.1 Product Description a) Type of EUT : Wireless Control for 501 spotlight b) Model No. : Guest No.728295 c) Serial No. : ---- d) FCC ID : CCW501 e) Working Frequency : 433.92 MHz f) Power Supply : 12V DC 1.2 Characteristics of Device: The “wireless control for 501 spotlight” is a wireless remote control transmitter operates at 433.92 MHz. The remote control transmitter sends signal to control the spotlight. 1.3 Test Methodology Both Conducted and radiated testing were performed according to the procedures in chapter 13 of ANSI C63.4. The equipment under test was operated continuously in its normal operating mode for the purpose of the measurements. In order to secure the continuous operation of the device under test, the circuit rewired by the manufacturer to affect its intended operation. The receiving antenna was varied from 1 to 4 meters and the wooden turntable was rotated through 360 degrees to obtain the highest reading on the field strength meter or on the display of the spectrum analyzer. And also, each emission was to be maximized by changing the orientation of the equipment transmitter under test. 1.4 Test Facility The semi-anechoic chamber and conducted measurement facility used to collect the radiated and conducted data are located inside the Building at No.8, Lane 29, Wen-ming Road, Lo-shan Tsun, Kweishan Hsiang, Taoyuan, Taiwan, R.O.C. This site has been accreditation as a FCC filing site. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 5 of 23 Sheets FCC ID.: CCW501 2. DEFINITION AND LIMITS 2.1 Definition Intentional radiator: A device that intentionally generates and emits radio frequency energy by radiation or induction. 2.2 Restricted Bands of Operation Only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42-16.423 399.9-410 4.5-5.25 0.495 - 0.505 ** 16.69475 - 16.69525 608-614 5.35-5.46 2.1735 - 2.1905 16.80425 - 16.80475 960-1240 7.25-7.75 4.125-4.128 25.5-25.67 1300-1427 8.025-8.5 4.17725-4.17775 37.5-38.25 1435-1626.5 9.0-9.2 4.20725-4.20775 73-74.6 1645.5-1646.5 9.3-9.5 6.215-6.218 74.8-75.2 1660-1710 10.6-12.7 6.26775-6.26825 108-121.94 1718.8-1722.2 13.25-13.4 6.31175-6.31225 123-138 2200-2300 14.47-14.5 8.291-8.294 149.9-150.05 2310-2390 15.35-16.2 8.362-8.366 156.52475 - 156.52525 2483.5-2500 17.7-21.4 8.37625-8.38675 156.7-156.9 2655-2900 22.01-23.12 8.41425-8.41475 162.0125-167.17 3260-3267 23.6-24.0 12.29-12.293 167.72-173.2 3332-3339 31.2-31.8 12.51975-12.52025 240-285 3345.8-3358 36.43-36.5 12.57675-12.57725 322-335.4 3600-4400 Above 38.6 13.36-13.41 Remark “**” : Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 6 of 23 Sheets FCC ID.: CCW501 2.3 Limitation (1) Conducted Emission Limits : For an intentional radiator which is designed to be connected to the public utility (AC) power line, the conducted limit is the following: Frequency Quasi Peak Average MHz dBμμV dBμμV 0.15 - 0.5 66-56 56-46 0.5 - 5.0 56 46 5.0 - 30.0 60 50 (2) Radiated Emission Limits : According to 15.231(e) ,Periodic operation in the band 40.66-40.70 MHz and above 70 MHz, the field strength of emissions from intentional radiators operated under this section shall not exceed the following: Frequency Band Field strength of Field strength of (MHz) Fundamental (uV/m) Spurious (uV/m) 40.66-40.70 1000 100 70-130 500 50 130-174 *500-1500 *50-150 174-260 1500 150 260-470 *1500-5000 *150-500 Above 470 5000 500 * Linear interpolations. According to 15.205 (b), the field strength of emissions appearing within the Restricted Bands shield not exceed.the general radiated limits in 15.209, as following table: Frequenciey Field Strength Measurement Distance (MHz) µV/meter dBµV/meter (meters) 30 - 88 100 40.0 3 88 - 216 150 43.5 3 216 - 960 200 46.0 3 Above 960 500 54.0 3 As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20 dB under any condition of modulation. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 7 of 23 Sheets FCC ID.: CCW501 (3) Limit of transmission time In addition, devices operated under the provisions of this paragraph shall be provided with a means for automatically limiting operation so that the duration of each transmission shall not be greater than one second and the silent period between transmissions shall be at least 30 times the duration of the transmission but in no case less than 10 seconds. 2.4 Labeling Requirement The device shall bear the following statement in a conspicuous location on the device : This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.5 User Information The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with the FCC RF exposure compliance requirement, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 8 of 23 Sheets FCC ID.: CCW501 3. RADIATED EMISSION MEASUREMENT 3.1 Applicable Standard For periodic operation intentional radiator, the radiated emission shall comply with § 15.231(b). 3.2 Measurement Procedure A.Preliminary Measurement For Portable Devices. For portable devices, the following procedure was performed to determine the maximum emission axis of EUT: 1. With the receiving antenna is H polarization, rotate the EUT in turns with three orthogonal axes to determine the axis of maximum emission. 2. With the receiving antennna is V polarization, rotate the EUT in turns with three orthogonal axes to determine the axis of maximum emission. 3. Compare the results derived from above two steps. So, the axis of maximum emission from EUT was determined and the configuration was used to perform the final measurement. B. Final Measurement 1. Setup the configuration per figure 1 and 2 for frequencies measured below and above 1 GHz respectively. Turn on EUT and make sure that it is in continuous operating function. 2. For emission frequencies measured below 1 GHz, a pre-scan is performed in a semi- anechoic chamber to determine the accurate frequencies of higher emissions and then each selected frequency is precisely measured. As the same purpose, for emission measured above 1 GHz, a pre-scan also be performed with a 1 meter measuring distance before final test. 3. For emission measured below and above 1 GHz, set the spectrum analyzer on a 120 kHz and 1 MHz resolution bandwidth respectively for each frequency measured in step 2. 4. The search antenna is to be raised and lowered over a range from 1 to 4 meters in horizontally polarized orientation. Position the highness when the highest value is indicated on spectrum analyzer, then change the orientation of EUT on test table over a range from 0。 to 360。with a speed as slow as possible, and keep the azimuth that highest emission is indicated on the spectrum analyzer. Vary the antenna position again and record the highest value as a final reading. A RF test receiver is also used to confirm emissions measured. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 9 of 23 Sheets FCC ID.: CCW501 Figure 1 : Frequencies measured below 1 GHz configuration Antenna Tower 3m Search Antenna EUT 4m RF Test Receiver Turn 1m 0.8m Table Ground Plane Figure 2 : Frequencies measured above 1 GHz configuration Antenna Tower 3m Horn Antenna EUT 4m Spectrum Analyzer Turn 1m 0.8m Table Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 10 of 23 Sheets FCC ID.: CCW501 3.3 Test Data 3.3.1 Fundamental and Harmonic Operated mode : Transmitting Test Date : Apr. 27, 2006 Temperature : 17 ℃ Humidity : 73％ Frequency Ant Reading Correct Duty Result @3m Limit @3m Pol (dBuV) Factor Factor (dBuV/m) (dBuV/m) (MHz) H/V Peak QP (dB) (dB) Peak QP AVG Peak QP AVG Fundamental 433.924 H 50.2 ---- 20.1 -16.7 70.3 ---- 53.6 100.8 ---- 80.8 433.924 V 50.0 ---- 20.1 -16.7 70.1 ---- 53.4 100.8 ---- 80.8 Harmonic 867.848 H 42.6 ---- 25.0 -16.7 67.6 ---- 50.9 72.8 ---- 52.8 867.848 V 33.6 ---- 25.0 -16.7 58.6 ---- 41.9 72.8 ---- 52.8 *1301.772 H 67.1 ---- -12.3 -16.7 54.8 ---- 38.1 74.0 ---- 54.0 *1301.772 V 67.5 ---- -12.3 -16.7 55.2 ---- 38.5 74.0 ---- 54.0 1735.696 H 65.5 ---- -11.0 -16.7 54.5 ---- 37.8 74.0 ---- 54.0 1735.696 V 57.8 ---- -11.0 -16.7 46.8 ---- 30.1 74.0 ---- 54.0 2169.620 H 55.3 ---- -8.7 -16.7 46.6 ---- 29.9 74.0 ---- 54.0 2169.620 V 54.6 ---- -8.7 -16.7 45.9 ---- 29.2 74.0 ---- 54.0 2603.544 H 59.3 ---- -6.7 -16.7 52.6 ---- 35.9 74.0 ---- 54.0 2603.544 V 56.2 ---- -6.7 -16.7 49.5 ---- 32.8 74.0 ---- 54.0 3037.468 H 55.6 ---- -4.4 -16.7 51.2 ---- 34.5 74.0 ---- 54.0 3037.468 V 57.3 ---- -4.4 -16.7 52.9 ---- 36.2 74.0 ---- 54.0 3471.392 H 51.3 ---- -1.2 -16.7 50.1 ---- 33.4 74.0 ---- 54.0 3471.392 V 55.3 ---- -1.2 -16.7 54.1 ---- 37.4 74.0 ---- 54.0 *3905.316 H/V ---- ---- 0 -16.7 ---- ---- ---- 74.0 ---- 54.0 *4339.240 H/V ---- ---- 1.8 -16.7 ---- ---- ---- 74.0 ---- 54.0 Note: 1. Peak Result =Peak Reading + Correct Factor 2. AVG Result = Peak Result + Duty Factor 3. If the result of peak value is under the limit of average, the average value doesn’t need to be measured. 4. “*” means the frequency is in the Restricted Bands. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 11 of 23 Sheets FCC ID.: CCW501 3.3.2 Other Emission Operated mode : Transmitting A. below 1GHz EUT : 433Tx Model : Guest No.728295 Status : Condition : Horizontal Date : 2006/4/26 Temp. : 19℃ Humi. : 74% QP QP QP QP Freq Factor Ant Table Level Result Limit Margin (MHz) (dB) Height Degree (dBuV) (dBuV) (dBuV) (dB) 1 122.150 8.0 13.8 21.8 43.5 -21.7 103 147 2 257.950 9.9 15.0 24.9 46.0 -21.1 103 66 3 325.850 8.9 17.3 26.2 46.0 -19.8 104 59 4 544.100 7.6 22.6 30.2 46.0 -15.8 102 246 5 604.725 7.7 23.6 31.3 46.0 -14.7 104 219 6 970.900 6.1 30.0 36.1 54.0 -17.9 106 357 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 12 of 23 Sheets FCC ID.: CCW501 EUT : 433Tx Model : Guest No.728295 Status : Condition : Vertical Date : 2006/4/26 Temp. : 19℃ Humi. : 74% QP QP QP QP Freq Factor Ant Table Level Result Limit Margin (MHz) (dB) Height Degree (dBuV) (dBuV) (dBuV) (dB) 1 30.000 17.2 13.1 30.3 40.0 -9.7 102 331 2 122.150 7.8 13.8 21.6 43.5 -21.9 106 298 3 265.225 8.9 15.2 24.1 46.0 -21.9 105 301 4 388.900 8.6 19.0 27.6 46.0 -18.4 105 94 5 614.425 7.4 23.8 31.2 46.0 -14.8 106 158 6 970.900 6.2 30.0 36.2 54.0 -17.8 102 45 B. above 1GHz Frequency Ant Reading Correct Duty Result @3m Limit @3m Margins Pol (dBuV) Factor Factor (dBuV/m) (dBuV/m) (MHz) H / V Peak (dB) (dB) Peak AVG Peak AVG ( dB ) Radiated emission frequencies above 1 GHz to 4.5 GHz were too low to be measured. Note: 1. Place of Measurement: Measuring site of the ETC. 2. If the data table appeared symbol of "***" means the value was too low to be measured. 3. The estimated measurement uncertainty of the result measurement is ±4.6dB (30MHz≦f<300MHz). ±4.4dB (300MHz≦f<1000MHz). ±4.1dB (1GHz≦f≦18GHz). Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 13 of 23 Sheets FCC ID.: CCW501 3.4 Field Strength Calculation (a) Field Strength: The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample calculation is as follows: RESULT = READING + CORR. FACTOR where CORR. FACTOR = Antenna FACTOR + Cable FACTOR Assume a receiver reading of 62.4 dBμV is obtained. The Antenna Factor of 14.1 and a Cable Factor of 3.4 is added. The total of field strength is 79.9 dBμV/m. RESULT = 62.4 + 14.1 + 3.4 = 79.9 dBμV/m Level in μV/m = Common Antilogarithm[(79.9 dBμV/m)/20] = 9885.5 μ V/m (b) Duty Factor: 0.304(ms) × 12 + 0.729(ms) × 1 20log = -16.7 dB 30.06(ms) The plotted graph of Duty Factor please see page 14 ~ 17 3.5 Radiated Test Equipment The following instrument are used for radiated emissions measurement : Equipment Manufacturer Model No. Serial No. Calibrated until EMI Test Receiver HP 8546A 13054404-001 Dec. 12, 2006 BiconiLog Antenna Schwarzbeck VULB 9160 13057310-001 Nov. 29,2006 Horn Antenna EMCO 3115 9107-3729 Jun. 04, 2006 Spectrum Analyzer Rohde & Schwarz FSU46 13040904-001 Nov. 02,2006 Note: The standards used to perform this calibration are traceable to NML/ROC, NIST/USA and NPL. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 14 of 23 Sheets FCC ID.: CCW501 RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 79.89 dBµV Ref 90 dBµV Att 10 dB SWT 80 ms 22.051282 ms 90 Delta 2 [T1 ] -0.01 dB 1 2 80 30.064103 ms A 1 AP VIEW 70 60 50 40 30 20 10 0 -10 Center 433.924 MHz 8 ms/ Date: 28.MAR.2006 10:30:39 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 15 of 23 Sheets FCC ID.: CCW501 RBW 100 kHz * VBW 100 kHz Ref 90 dBµV Att 10 dB SWT 20 ms 90 A 80 1 AP VIEW 70 60 50 40 30 20 10 0 -10 Center 433.924 MHz 2 ms/ Date: 28.MAR.2006 10:32:35 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 16 of 23 Sheets FCC ID.: CCW501 RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 78.07 dBµV Ref 90 dBµV Att 10 dB SWT 5 ms 1.506410 ms 90 Delta 2 [T1 ] 0.61 dB 1 2 729.166667 µs A 80 1 AP VIEW 70 60 50 40 30 20 10 0 -10 Center 433.924 MHz 500 µs/ Date: 28.MAR.2006 10:34:35 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 17 of 23 Sheets FCC ID.: CCW501 RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 78.63 dBµV Ref 90 dBµV Att 10 dB SWT 5 ms 3.181090 ms 90 Delta 2 [T1 ] 0.05 dB 1 2 304.487179 µs A 80 1 AP VIEW 70 60 50 40 30 20 10 0 -10 Center 433.924 MHz 500 µs/ Date: 28.MAR.2006 10:35:20 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 18 of 23 Sheets FCC ID.: CCW501 3.6 Measuring Instrument Setup Measuring instrument setup in measured frequency band when specified detector function is used : Frequency Band Instrument Function Resolution Video (MHz) Bandwidth Bandwidth 30 to 1000 EMI Test Receiver Peak 120 kHz 300 kHz 1000 to 4500 EMI Test Receiver Peak 1 MHz 1 MHz Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 19 of 23 Sheets FCC ID.: CCW501 4. BANDWIDTH OF EMISSION 4.1 Applicable Standard Plot Graphic of Bandwidth Per FCC rule §15.231(c), the permitted emission bandwidth is no wider than 0.25%of the center frequency for devices operating above 70 MHz and below 900 MHz. 4.2 Test Equipment Equipment Manufacturer Model No. Next Cal. Date Spectrum Analyzer Rohde & Schwarz FSU46 Nov. 02, 2006 4.3 Test Result Test Date : Apr. 27, 2006 Temperature : 17 ℃ Humidity : 73％ Center Frequency 433.924 MHz FCC Limit 433.924 MHz ×0.25%＝1084.8 kHz Bandwidth of Emission 412 kHz Chart Page 20 Result PASS Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 20 of 23 Sheets FCC ID.: CCW501 * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 82.06 dBµV Ref 90 dBµV Att 10 dB SWT 2.5 ms 433.924000000 MHz 90 Delta 2 [T1 ] 1 -20.39 dB 80 -210.538461538 kHz A Delta 3 [T1 ] 1 PK -20.37 dB VIEW 70 202.923076923 kHz 2 3 D1 62.06 dBµV 60 50 40 30 20 10 0 -10 Center 433.924 MHz 200 kHz/ Span 2 MHz Date: 28.MAR.2006 10:26:22 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 21 of 23 Sheets FCC ID.: CCW501 5. CONDUCTED EMISSION MEASUREMENT This EUT is excused from investigation of conducted emission, for it is powered by battery only. According to §15.207 (d), measurements to demonstrate compliance with the conducted limits are not required for devices which only employ battery power for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines. Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 22 of 23 Sheets FCC ID.: CCW501 6. LIMIT OF TRANSMISSION TIME 6.1 Applicable Standard According to 15.231(a)(1), a manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. 6.2 Active Time This transmitter is operated by manual and active time is 0.711 second after being released. Note : Please refer to page 23 for chart 6.3 Test Equipment Equipment Manufacturer Model No. Next Cal. Date Spectrum Analyzer Rohde & Schwarz FSU46 Nov. 02, 2006 Rev. No 1.0

ETC Report No. : 06-03-MAS-244-01 Sheet 23 of 23 Sheets FCC ID.: CCW501 Active_time RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 26.93 dBµV Ref 90 dBµV Att 10 dB SWT 6 s 3.432692 s 90 Delta 2 [T1 ] -0.42 dB 80 711.538462 ms A 1 PK * VIEW 70 60 50 40 30 1 2 20 10 0 -10 Center 433.924 MHz 600 ms/ Date: 26.APR.2006 16:34:22 Rev. No 1.0


Document Created: 2006-06-02 14:06:35
Document Modified: 2006-06-02 14:06:35
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC