Operational Description

FCC ID: CCRAH2

Operational Description

Download: PDF
FCCID_1329981

AH2 OPERATION DESCRIPTION Operation Status Before Operation SW Control 3 Color LED AH2 Status Notes More than Off Depress Lights Green Normal Operation Feeding power to the circuit -> RF Transmission -> Mute Off -> AF On Power 1sec On/Off In Normal Operation or AF More than Depress Off Off Audio Off -> RF Off -> Power Off, LED : Lights -> Blinks (1sec) -> Off Volume Adjust 1sec In case the SW is depressed more than 1sec, the power shall be Off. LED : Light -> Blinks In Operation (Audio On) Push 0.2-1sec Blinks Green Mute On Mute (1sec) -> Off In Operation (Mute On) Push 0.2-1sec Lights Green Audio On In case the SW is depressed more than 1sec, the power shall be Off. LED : Blinks -> Off In Operation N/A --- Blinks Blue Normal Operation+Battery Low Battery Low Mute N/A --- Blinks Blue Mute On + Battery Low Ignore the Mute status indication AF Level Adjustment + Battery AF Level Adjustment N/A --- Blinks Yellow Follow the Level Adjustment Indications, Ignore the battery low status. More than Low Off Depress Blinks Yellow* Volume Adjustment Mode Power Off(Off) -> Level Adjustment Mode, * The speed of LED blink is the last level setting. 5sec Increase Gain Push 1 Time Blinks Yellow Increase Gain Increases the level by one step with one push of the SW. (Total 5 steps) Fastest Blinks AF Volume At Maximum Level N/A --- Maximum Level Reach at the maximum level. Even AH2 is battery low, the LED keeps the fast blinks. Yellow Adjustment Decrease Gain Push 1 Time Blinks Yellow Decrease Gain Decreases the level by one step with one push of the SW. (Total 5 steps) Slowest Blinks At Minimum Level N/A --- Minimum Level Reach at the minimum level. Even AH2 is battery low, the LED keeps the slowest blinks. Yellow Fix the AF Volume Level Neglected 10 sec Lights Normal Operation 10sec after without touching the SW, the level shall be fixed and back to normal operation. Either In Operation or Power While recharging system with 5V power is connected with AH2, all of AH2 functions are the Neglected N/A Lights Blue Under Recharging Off same as power off. Recharging While recharging system with 5V power is connected with AH2, all of AH2 functions are the Complete Recharging Neglected N/A Off Power Off same as power off. LED Colors Colors Meanings Green Normal Operation Yellow AF Level Adjustment Blue Battery Status

ＡＨ２ Wireless Transmitter Specifications Items Standard Unit Conditions Min Typical Max Product Standard 3.4 3.7 4.2 1 Operating Power Voltage V Actual Operation 3.2 3.7 5 2 Consumption Current 30 40 mA Power Supply Voltage : 3.7V 3 RF Output Power 5mW -4 +3 dB 4 Frequency Stability -30 30 kHz 5 Spurious 1 uW 6 Modulation Factor Deviation 13 15 17 kHz INPUT 1kHz -20dBv / +-6dB/VRct 7 Input Impedance MIC 2k ohms 8 T.H.D. at Overall 2 % 1kHz DEV=Which of 15kHz or 5kHz or 50Hz, 15kHz at 9 Audio Frequency Response -3.5 3.5 dB MOD. 1kHz INPUT -50dBv overall /25 oC Specifications Operating Frequencies CH1 642.375MHz CH2 642.875MHz CH3 644.125MHz CH4 644.750MHz CH5 645.500MHz CH6 645.750MHz Frequency Type F3E Modulation Type Variable Reactance Modulation OSC System Crystal SAW Oscillator Pre-emphasis 50usec Noise Reduction Type Compander Type Operating Distance 100m from receiver in sight. Antenna Utilizing microphone boom Input Microphone Permanently Attached Phantom 3V/3.2kDC/2.2kAC Maximum Input Level -10dBv /VRct (TYP) Battery Lithium polymer battery(3.7V/210mA/h) Battery Life (Alkaline) 5 hours at 25 oC Battery charge USB charger : 100mA/ 2-3H Optional AC Adapter charger : 200mA /1-2H Operating Temperature 0 - 50 oC Controls One push switch for Power/VR/Mute 1 x 3 color LED to indicate Battery, Normal Operation, Mute, Level Change, Display (LED) Recharging status Dimensions W : 14mm, L : 177mm ,H : 58 mm(no Anntena included) Weight approx. 23g


Document Created: 2010-07-09 09:42:42
Document Modified: 2010-07-09 09:42:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC