tune up info

FCC ID: CCRAH1M

Parts List/Tune Up Info

Download: PDF
FCCID_104465

AH1 PCB Adjustment & Confirmation Method No Item Details Adjustment Point Settings/Standards Notes 1 Initial Setting Set PCB and initial setting PCB power switch = ON 2 Power supply input Supply power at battery terminal. 1.5V 3 Consumption Current Confirmation Consumption current at 1.5V. Less than 70mA 4 Internal Voltage Confirmation Ouput voltage of DC-DC Converter. 3.0V 5 Frequency Adjustment Adjust each channel to the specified frequency. VR2 by spectum analyzer. Specified frequency +/-5kHz. 6 RF Output Level Confirmation Check by spectrum analyzer. +3dBm - +10dBm 7 Spurious Level Confirmation Check by spectrum analyzer. Less than 1uW. 8 User Volume Setting Set to 11 o'clock position. VR4 9 Deviation Adjustment Adjust by audio output from receiver. VR3/Audio analyzer Receiver output 0dBv +/- 1dB Audio generator -20dBv 10 Distortion Ratio Confirmation Adjust by audio output from receiver. Less than 2% Audio generator -30dBv 11 Frequency Response Confirmation Adjust by audio output from receiver. +/-3.5dB over 50Hz to 15kHz (ref. 1kHz) Audio generator -40dBv 12 Power Switch Operation Confirmation 1 Measure consumption current at power switch OFF. 0mA 13 Power Switch Operation Confirmation 2 Confirm LED 1 flash when power switch ON. Tip of optical fiber jig 14 Low Voltage Indication Confirmation 1 Lights off LED 1. Tip of optical fiber jig Power supply voltage 1.15V. 15 Low Voltage Indication Confirmation 2 Lights LED 1. Tip of optical fiber jig Power supply voltage 1.05V. 16 Low Voltage Operation Confirmation Check at DC-DC convertor output voltage. Power supply voltage 0.9V. within 3.0V +/- 0.1V


Document Created: 2000-06-13 13:43:51
Document Modified: 2000-06-13 13:43:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC