LAbel info

FCC ID: CB2JAGHL3

ID Label/Location Info

Download: PDF
FCCID_121062

Test report #20000307F FCC 15.231 for CB2JAGHL3 FCC ID: CB2JAGHL3 Tested April 6, 2000 EXHIBIT F: EQUIPMENT LABEL [2.925, 2.926, 2.1033(B2,7), 15.19(A3)] LABEL EXAMPLE Refer to picture file “EXF_Label.pdf” The FCC Identifier assigned to the EUT is FCC ID: CB2JAGHL3. This number will be imprinted on the 1.0”x1.5” high temperature polyester matte white label. The label will be placed on the exterior of the CB2JAGHL3 housing using an acrylic adhesive that will permanently affix the label. LABEL LOCATION EXAMPLE Refer to picture file “EXD_exttoplbl.jpg” Because of the small size of the device and because the installation is inside a portion of the automobile, the following statements will appear in the user’s manual. Refer to Exhibit N for the entire text of the user’s manual. “This device complies with Part 15 of the FCC rules and with RSS-210 of the Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received including interference that may cause undesired operation. WARNING: The transmitter has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.” AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014 121062 Exhibit F: Page 1 of 2


Document Created: 2000-10-13 20:21:42
Document Modified: 2000-10-13 20:21:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC