Exhibit A ID Label and location per 2 1033 b7

FCC ID: CB2BMWHL3

ID Label/Location Info

Download: PDF
FCCID_158670


Test report #0100410F FCC 15.231 for CB2GTXHL3 FCC ID: CB2GTXHL3 Tested April 4, 2001 EXHIBIT A: EQUIPMENT LABEL [2.925, 2.926, 2.1033(B2,7), 15.19(A3)] LABEL EXAMPLE For the label print, page 2 of this exhibit, Refer to picture file “EXA_Label.pdf” The FCC Identifier assigned to the EUT is FCC ID: CB2GTXHL3. This number will be imprinted on the 1.0”x1.5” high temperature polyester matte white label. Because of the small size of the device and because the installation is inside a portion of the automobile, the following statements will appear in the user’s manual. Refer to Exhibit D for the entire text of the user’s manual. “This device complies with FCC rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received including interference that may cause undesired operation. WARNING: The transmitter has been tested and complies with FCC and DOC/MDC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.” LABEL LOCATION The label will be placed on the foil side of the CB2GTXHL3 PCB using an acrylic adhesive that will permanently affix the label. AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014EXA_Label Exhibit A: Page 1 of 2


Document Created: 2001-05-15 06:23:24
Document Modified: 2001-05-15 06:23:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC