|Applicant Business||Tait International Limited|
|Business Address||245 Wooldridge Road Harewood, Christchurch,N/A New Zealand 8051|
|TCB Scope||B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 (all below 3 GHz)|
|TCB Email||[email protected]|
|Applicant||Brian Emmett – Standards and Regulatory Manager |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||Tait International Limited|
|Test Firm Contact||David Jackson|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||Brian Emmett – Standards and Regulatory Manager|
Comment [1Darbk3yOB/CUMiVs32MWw==]: Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively.
Comment [ko0YJXrLW8RzH+j/w7F5Dg==]: Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.