12122325-E4V1 FCCIC Report MPE

FCC ID: C9O-SPMB1

RF Exposure Info

Download: PDF
FCCID_4064995

                FCC Part 1 Subpart I
                FCC Part 2 Subpart J

                    MPE REPORT

                        FOR

BICYCLE SEATPOST WITH AIREA, BLE AND ANT+ RADIOS

              MODEL NUMBER: 13200

                FCC ID: C90-SPMB1
                 IC: 1016A-SPMB1

          REPORT NUMBER: 12122325-E7V1

            ISSUE DATE: October 10, 2018


                    Prepared for
                     SRAM LLC
            1000 W Fulton Market 4th Floor
               Chicago, IL 60607 U.S.A


                    Prepared by
          UL VERIFICATION SERVICES INC.
              47173 BENICIA STREET
            FREMONT, CA 94538, U.S.A.
                TEL: (510) 771-1000
                FAX: (510) 661-0888




               NVLAP LAB CODE 200065-0


REPORT NO:12122325-E7V1                                                                              DATE: 10/10/2018
FCC ID: C90-SPMB1                                                                                   IC: 1016A-SPMB1

                                                  Revision History

            Issue
 Rev.       Date               Revisions                                                                Revised By
  V1        10/10/2018         Initial Issue




                                      Page 2 of 7
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO:12122325-E7V1                                                                                                DATE: 10/10/2018
FCC ID: C90-SPMB1                                                                                                     IC: 1016A-SPMB1

                                                TABLE OF CONTENTS
1.     ATTESTATION OF TEST RESULTS ................................................................................. 4

2.     TEST METHODOLOGY ..................................................................................................... 5

3.     REFERENCES ................................................................................................................... 5

4.     FACILITIES AND ACCREDITATION ................................................................................. 5

5.     DEVICE UNDER TEST ....................................................................................................... 6

6.     MAXIMUM OUTPUT POWER ............................................................................................ 6

7.     STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .......................................... 7
     7.1.    FCC ............................................................................................................................. 7




                                      Page 3 of 7
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
     This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO:12122325-E7V1                                                                              DATE: 10/10/2018
FCC ID: C90-SPMB1                                                                                   IC: 1016A-SPMB1


1. ATTESTATION OF TEST RESULTS
COMPANY NAME:                       SRAM LLC
                                    1000 W Fulton Market 4th Floor
                                    Chicago, IL 60607 U.S.A

EUT DESCRIPTION:                    Bicycle Seatpost with AIREA, BLE and ANT+ Radios

MODEL:                              13200


                                          APPLICABLE STANDARDS
                               STANDARD                                                 TEST RESULTS
          FCC PART 1 SUBPART I & PART 2 SUBPART J                                            Complies


UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance
with the requirements set forth in the above standards, using test results reported in the test
report documents referenced below and/or documentation furnished by the applicant. All
indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc.
based on interpretations of these calculations. The results show that the equipment is capable
of demonstrating compliance with the requirements as documented in this report.

Note: The results documented in this report apply only to the tested sample, under the
conditions and modes of operation as described herein. This document may not be altered or
revised in any way unless done so by UL Verification Services Inc. and all revisions are duly
noted in the revisions section. Any alteration of this document not carried out by UL Verification
Services Inc. will constitute fraud and shall nullify the document. This report must not be used
by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any
agency of the U.S. Government.

Approved & Released For
UL Verification Services Inc. By:                                 Calculated By:




DAN CORONIA                                                      STEVEN TRAN
CONSUMER TECHNOLOGY DIVISION                                     CONSUMER TECHNOLOGY DIVISION
OPERATIONS LEADER                                                PROJECT ENGINEER
UL Verification Services Inc.                                    UL Verification Services Inc




                                      Page 4 of 7
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO:12122325-E7V1                                                                              DATE: 10/10/2018
FCC ID: C90-SPMB1                                                                                   IC: 1016A-SPMB1


2. TEST METHODOLOGY
All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and ISED
Safety Code 6.


3. REFERENCES
All measurements were made as documented in test report UL Verification Services Inc.
Document 12122325-E1,12122325-E2, and 12122325-E3 for operation in the 2.4 GHz band
and UL Verification Services Inc.

Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports.



4. FACILITIES AND ACCREDITATION
The test sites and measurement facilities used to collect data are located at 47173 and 47266
Benicia Street, Fremont, California, USA.

UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full
scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm.




                                      Page 5 of 7
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO:12122325-E7V1                                                                              DATE: 10/10/2018
FCC ID: C90-SPMB1                                                                                   IC: 1016A-SPMB1

5. DEVICE UNDER TEST
The EUT is a Bicycle Seatpost with radios BLE operating in the frequency range of 2402 to
2480 MHz, AIREA operating in the frequency range of 2405 to 2480, and ANT+ operating in the
frequency range of 2405 to 2475. The user to antenna separation distance is 0mm.


6. MAXIMUM OUTPUT POWER
The maximum output power of the device is declared as the following:

BLE = 0dBm ±4dB; Antenna Gain: -2 dBi
AIREA = 0dBm ±4dB; Antenna Gain: -2 dBi
ANT+ = 0dBm ±3dB; Antenna Gain: -2 dBi




                                      Page 6 of 7
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO:12122325-E7V1                                                                                 DATE: 10/10/2018
FCC ID: C90-SPMB1                                                                                      IC: 1016A-SPMB1

7. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS
    7.1.           FCC
SAR test exclusion in accordance with KDB 447498 D01 v06.

The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0, for
1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
    •     f(GHz) is the RF channel transmit frequency in GHz
    •     Power and distance are rounded to the nearest mW and mm before calculation
    •     The result is rounded to one decimal place for comparison
This test exclusion is applicable only when the minimum test separation distance is ≤ 50 mm and for
transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is <
5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

SAR Exclusion Calculation Table for Portable Devices (Separation distance < 50mm)
             Frequency     Max Output power                          Max Output Power                Separation       Calculated
    Tx                                          Duty Cycle
               (MHz)       dBm        mW                       with Duty factor correction (mW)   distances (mm)   Threshold Value

   BLE         2480         4.0         3         100%                        3                         5                0.9



             Frequency     Max Output power                          Max Output Power                Separation       Calculated
    Tx                                          Duty Cycle
               (MHz)       dBm        mW                       with Duty factor correction (mW)   distances (mm)   Threshold Value

  AIREA        2480         4.0         3         100%                        3                         5                0.9



             Frequency     Max Output power                          Max Output Power                Separation       Calculated
    Tx                                          Duty Cycle
               (MHz)       dBm        mW                       with Duty factor correction (mW)   distances (mm)   Threshold Value

   ANT+        2480         3.0         2         100%                        2                         5                0.6


Conclusion:
The device operates with a maximum Duty Cycle of 100%. The Calculated Threshold with duty cycle
applied is ≤3 for 1-g SAR and ≤7 for 10-g extremity SAR; therefore, this device qualifies for Standalone
SAR test exclusion.

                                               END OF REPORT




                                      Page 7 of 7
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.



Document Created: 2019-03-28 08:21:43
Document Modified: 2019-03-28 08:21:43

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC