RF Exposure Report

FCC ID: C9O-FDED

RF Exposure Info

Download: PDF
FCCID_2785466

FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS-102 ISSUE 5 RF EXPOSURE REPORT FOR eTap System, Front Derailleur MODEL NUMBER: 12801 FCC ID: C9O-FDED IC: 10161A-FDED REPORT NUMBER: 15U21452-S1V2 ISSUE DATE: OCTOBER 12, 2015 Prepared for SRAM LLC 1000 W FULTON MARKET 4TH FLOOR CHICAGO, IL 60607, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000

REPORT NO: 15U21452-S1V2 DATE: OCTOBER 12, 2015 FCC ID: C9O-FDED IC: 10161-FDED Revision History Issue Rev. Date Revisions Revised By -- 9/24/2015 Original issue Report revised based on Reviewer’s comments: V2 10/12/2015 1. Updated IC ID. B. Bayani 2. Updated Secs. 5 and 6. Page 2 of 7 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 15U21452-S1V2 DATE: OCTOBER 12, 2015 FCC ID: C9O-FDED IC: 10161-FDED TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. Device under test .............................................................................................................. 5 6. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .......................................... 6 6.1. FCC ............................................................................................................................. 6 6.2. INDUSTRY CANADA ................................................................................................... 7 Page 3 of 7 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 15U21452-S1V2 DATE: OCTOBER 12, 2015 FCC ID: C9O-FDED IC: 10161-FDED 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SRAM LLC EUT DESCRIPTION: Radio enabled Gear Changing System for High Performance Bicycle Applications MODEL: eTap Front Derailleur SERIAL NUMBER: 8882 DATE TESTED: SEPTEMBER 9 - 19, 2015 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS-102 ISSUE 5 Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Dave Weaver Program Manager UL Verification Services Inc. Page 4 of 7 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 15U21452-S1V2 DATE: OCTOBER 12, 2015 FCC ID: C9O-FDED IC: 10161-FDED 2. TEST METHODOLOGY All calculations were made in accordance with FCC KDB 447498 and IC RSS-102 issue 5. 3. REFERENCES Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports or client declarations. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. 5. Device under test The EUT is a radio controlled derailleur using 802.15.4 SRAMLink technology. It is mounted onto the front gear of a bicycle. The minimum user separation distance is unspecified but for the purposes of the SAR exclusion calculations was assumed to be 0mm The maximum output power is 3dBm The antenna gain is 0dBi Page 5 of 7 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 15U21452-S1V2 DATE: OCTOBER 12, 2015 FCC ID: C9O-FDED IC: 10161-FDED 6. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS 6.1. FCC SAR test exclusion in accordance with KDB 447498. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0, for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison This test exclusion is applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. SAR Exclusion Calculation Table for Portable Devices (separation distance < 50mm) Frequency Avg Output power Separation Calculated Tx (MHz) dBm mW distances (mm) Threshold 802.15.4 2480 3.00 2 5 0.6 Conclusion: The computed value is < 3; therefore, the device qualifies for Standalone SAR test exclusion. Page 6 of 7 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 15U21452-S1V2 DATE: OCTOBER 12, 2015 FCC ID: C9O-FDED IC: 10161-FDED 6.2. INDUSTRY CANADA The SAR exclusion table from RSS-102 issue 5 is reproduced below: Frequency Antenna Gain 0.0 dBi Tx Maximum Avg Power (MHz) (dBm) (mW) Conducted 3.0 2.00 802.15.4 2480 E.I.R.P 3 2.00 The minimum antenna to user distance that will be encountered in normal use is 0mm. This results in an exemption limit of 4 mW at 2450 MHz. As the maximum output power is 2 mW conducted and 2 mW EIRP the DUT qualifies for SAR test exclusion. END OF REPORT Page 7 of 7 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .


Document Created: 2015-10-12 11:30:04
Document Modified: 2015-10-12 11:30:04
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC