12922855-S1V1_App F_SAR Dipole Certificates

FCC ID: C3K1867

RF Exposure Info

Download: PDF
FCCID_4453406

Calibration Laboratory of wtytm $ \\_’// 3 5 Schweizerischer Kalibrierdienst & & — Schmid & Partner m C Service suisse d‘étalonnage Engineering AG . R‘ 3 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *4,{,:\\\\\\\\‘ S Swiss Calibration Service tArin|abs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D2450V2—899_Mar19 CALIBRATION CERTIFICATE Object D2450V2 — SN:899 Calibration procedure(s) QA CAL—O5.v11 Calibration Procedure for SAR Validation Sources between 0.7—3 GHz Calibration date: March 22, 2019 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S!). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—Z291 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z91 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—18 (No. 217—02683) Apr—19 Reference Probe EX3DV4 SN: 7349 31—Dec—18 (No. EX3—7349_Dec18) Dec—19 DAE4 SN: 601 04—Oct—18 (No. DAE4—601_Oct18) Oct—19 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter E4419B SN: GB39512475 07—Oct—15 (in house check Feb—19) In house check: Oct—20 Power sensor HP 8481A SN: US37292783 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—18) In house check: Oct—20 RF generator R&S SMT—O6 SN: 100972 15—Jun—15 (in house check Oct—18) In house check: Oct—20 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Signature Calibrated by: Manu Seitz Laboratory Technician * Approved by: Katja Pokovic Technical Manager ?;-/—‘ Issued: March 22, 2019 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—899_Mar19 Page 1 of 8

Calibration Laboratory of e\‘“\‘@?s S Schweizerischer Kalibrierdienst Schmid & Partner :\\E//@: Service suisse d‘étalonnage Engineering AG % C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *g6@\‘;@ S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORM x.y.z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—899_Mar19 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS5 V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 37.7 4 6 % 1.85 mho/im + 6 % Head TSL temperature change during test <0.5 °C _——— «_——— SAR result with Head TSL SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 250 mW input power 13.2 W/kg SAR for nominal Head TSL parameters normalized to 1W 51.6 Wikg + 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 250 mW input power 6.11 Wi/ikg SAR for nominal Head TSL parameters normalized to 1W 24.1 Wikg £ 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 51.2 + 6 % 1.99 mho/im + 6 % Body TSL temperature change during test <0.5 °C =——— wa«= SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 12.7 Wikg SAR for nominal Body TSL parameters normalized to 1W 50.0 Wikg * 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.93 Wikg SAR for nominal Body TSL parameters normalized to 1W 23.5 Wikg + 16.5 % (k=2) Certificate No: D2450V2—899_Mar19 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 53.5 Q + 8.3 jQ Return Loss —21.2 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 47.8 O + 9.4 jQ Return Loss — 20.1 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.162 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D2450V2—899_Mar19 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 22.03.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:899 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: £= 2450 MHz; o0 = 1.85 $/m; & = 37.7; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(7.96, 7.96, 7.96) @ 2450 MHz; Calibrated: 31.12.2018 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 S$Sn601; Calibrated: 04.10.2018 e Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 e DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 116.2 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 26.6 W/kg SAR(I g) = 13.2 W/kg; SAR(10 g) = 6.11 W/kg Maximum value of SAR (measured) = 22.0 W/kg dB —20.00 —25.00 0 dB =22.0 W/kg = 13.42 dBW/kg Certificate No: D2450V2—899_Mar19 Page 5 of 8

Impedance Measurement Plot for Head TSL File Yiew Channel Sweep Calibration TraceScale Marker System Window Help A2. 478 ° ChiAugs 20 Chi: Start 2,25000 GHz ———= Stop 2.65000 GHz 50000 AHz —2 .00 .00 .00 10 .00 Ch 1 = Ch1i: Start 2.25000 GHz Stop 2.65000 GHz Status CH 1: Avg=20 Delay Certificate No: D2450V2—899_Mar19 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 22.03.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:899 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.99 S/m; g, = 51.2; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(8.09, 8.09, 8.09) @ 2450 MHz; Calibrated: 31.12.2018 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 04.10.2018 e Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 e DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 108.4 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 25.3 W/kg SAR(I g) = 12.7 W/kg; SAR(10 g) = 5.93 W/kg Maximum value of SAR (measured) = 20.8 W/kg M 0 5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 20.8 W/kg = 13.18 dBW/kg Certificate No: D2450V2—899_Mar19 Page 7 of 8

Impedance Measurement Plot for Body TSL File Yiew Channel Sweep Calibration Trace Scale Marker System Window Help 2.450000 GHz 47.799 C 611.27 pH §.4174 € 2,450000 GHz 98.434 mU R 97 E85 ° ChiAug= 20 Ch1: Start 2.25000 GHz _—— Stop 2.65000 GHz 450000 GHz —210. 137 daB O0 .00 .00 .00 10 Ch i Ch1: Start 2 Stop 2.65000 GHz Status CH 1: Avg=20 Delay LCL Certificate No: D2450V2—899_Mar19 Page 8 of 8

Calibration Laboratory of S \\“\”'“""Il \\A/ J & . h. 23 Schweizerischer Kalibrierdienst & S § o Schmid & Partner I.J/ c Service suisse d‘étalonnage Engineering AG o * /x y Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland ~7//!;\\\\\\\* S Swiss Calibration Service Aul it Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D5GHzV2—1003_Feb19 |CALIBRATION CERTIFICATE | Object D5SGHzV2 — SN:1003 Calibration procedure(s) QA CAL—22.v4 Calibration Procedure for SAR Validation Sources between 3—6 GHz Calibration date: February 19, 2019 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—Z91 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z91 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—18 (No. 217—02683) Apr—19 Reference Probe EX3DV4 SN: 3503 31—Dec—18 (No. EX3—3503_Dec18) Dec—19 DAE4 SN: 601 04—Oct—18 (No. DAE4—601_Oct18) Oct—19 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter E4419B SN: GB41293874 06—Apr—16 (in house check Jun—18) In house check: Jun—20 Power sensor HP 8481A SN: US37292783 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—18) In house check: Oct—20 RF generator R&S SMT—O6 SN: 100972 15—Jun—15 (in house check Oct—18) In house check: Oct—20 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Signature Calibrated by: Michael Weber Laboratory Technician wg l. Approved by: Katjia Pokovic Technical Manager %/%’C Issued: February 20, 2019 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1003_Feb19 Page 1 of 16

Calibration [ Laboratory of sFAWZ \\\___///*z S Schweizerischer Kalibrierdienst Schmid & Partner M c Service suisse d‘étalonnage Engineering AG s ns Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland C,{/—*\T\\\\“ S swiss Calibration Service Ahil ubs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORM x.y,2z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1003_Feb19 Page 2 of 16

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5250 MHz +1 MHz 5400 MHz + 1 MHz Frequency 5600 MHz + 1 MHz 5750 MHz +1 MHz 5850 MHz + 1 MHz Head TSL parameters at 5250 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.71 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 36.0 £ 6 % 4.50 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— ———— SAR result with Head TSL at 5250 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.09 W/kg SAR for nominal Head TSL parameters normalized to 1W 80.8 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.33 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.3 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Feb19 Page 3 of 16

Head TSL parameters at 5400 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.8 4.86 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 35.8 + 6 % 4.66 mho/m + 6 % Head TSL temperature change during test <0.5 °C aa—~ SAR result with Head TSL at 5400 MHz SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 8.11 W/kg SAR for nominal Head TSL parameters normalized to 1W 81.0 W/kg + 19.9 %(k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.31 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.1 Wikg + 19.5 % (k=2) Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 35.5 + 6 % 4.86 mho/m + 6 % Head TSL temperature change during test <0.5 °C —=—— SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.29 Wikg SAR for nominal Head TSL parameters normalized to 1W 82.7 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.38 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.8 Wikg + 19.5 % (Kk=2) Certificate No: D5GHzV2—1003_Feb19 Page 4 of 16

Head TSL parameters at 5750 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.4 5.22 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.3 +6 % 5.02 mho/im + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5750 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.09 W/kg SAR for nominal Head TSL parameters normalized to 1W 80.7 Wi/kg + 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.30 W/ikg SAR for nominal Head TSL parameters normalized to 1W 23.0 Wikg + 19.5 % (k=2) Head TSL parameters at 5850 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.2 5.32 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.2 +6 % 5.12 mho/m +6 % Head TSL temperature change during test <0.5 °C «««= «u> SAR result with Head TSL at 5850 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.32 W/kg SAR for nominal Head TSL parameters normalized to 1W 83.5 Wikg + 19.9 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.37 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.7 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Feb19 Page 5 of 16

Body TSL parameters at 5250 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.36 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.0 x 6 % 5.46 mho/m +6 % Body TSL temperature change during test <0.5 °C ———— «_——— SAR result with Body TSL at 5250 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.50 W/kg SAR for nominal Body TSL parameters normalized to 1W 74.4 Wikg + 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.10 Wikg SAR for nominal Body TSL parameters normalized to 1W 20.8 W/kg + 19.5 % (k=2) Body TSL parameters at 5400 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.7 5.53 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.7 £ 6 % 5.67 mho/im + 6 % Body TSL temperature change during test <0.5 °C a««= ==—~ SAR result with Body TSL at 5400 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.76 Wikg SAR for nominal Body TSL parameters normalized to 1W 77.0 Wikg * 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.17 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.5 Wi/kg + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Feb19 Page 6 of 16

Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.4 £6 % 5.94 mho/m +6 % Body TSL temperature change during test <0.5 °C ==——— ———— SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.99 W/kg SAR for nominal Body TSL parameters normalized to 1W 79.3 Wi/kg + 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.25 Wi/kg SAR for nominal Body TSL parameters normalized to 1W 22.3 Wikg + 19.5 % (k=2) Body TSL parameters at 5750 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.3 5.94 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.1 +6 % 6.15 mho/m + 6 % Body TSL temperature change during test <0.5 °C _—«— SAR result with Body TSL at 5750 MHz SAR averaged over 1 cm® (1 g) of Body TSL Condition SAR measured 100 mW input power 7.68 W/kg SAR for nominal Body TSL parameters normalized to 1W 76.2 Wikg + 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.16 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.4 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Feb19 Page 7 of 16

Body TSL parameters at 5850 MHz The followingparameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.1 6.06 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 45.9 + 6 % 6.29 mho/m + 6 % Body TSL temperature change during test <0.5 °C wius _——— SAR result with Body TSL at 5850 MHz SAR averaged over 1 cm® (1 g) of Body TSL Condition SAR measured 100 mW input power 7.89 W/kg SAR for nominal Body TSL parameters normalized to 1W 78.4 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 219 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.7 Wikg * 19.5 % (k=2) Certificate No: D5GHzV2—1003_Feb19 Page 8 of 16

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5250 MHz Impedance, transformed to feed point 47 .4 Q — 8.7 |Q Return Loss — 20.7 dB Antenna Parameters with Head TSL at 5400 MHz Impedance, transformed to feed point 52.7 Q — 7.2 |Q Return Loss — 22.5 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 54.6 O — 2.0 jQ Return Loss — 26.4 dB Antenna Parameters with Head TSL at 5750 MHz Impedance, transformed to feed point 54.3 Q — 5.6 jQ Return Loss — 23.5 dB Antenna Parameters with Head TSL at 5850 MHz Impedance, transformed to feed point 59.9 Q — 4.5 jQ Return Loss — 20.1 dB Antenna Parameters with Body TSL at 5250 MHz Impedance, transformed to feed point 49.5 Q — 6.1 jQ Return Loss — 24.3 dB Antenna Parameters with Body TSL at 5400 MHz Impedance, transformed to feed point 41.1 Q — 4.4 jQ Return Loss — 26.9 dB Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 56.4.6 Q — 1.2 jQ Return Loss — 24.3 dB Certificate No: D5GHzV2—1003_Feb19 Page 9 of 16

Antenna Parameters with Body TSL at 5750 MHz Impedance, transformed to feed point 58.4 Q — 2.3 |Q Return Loss —21.9 dB Antenna Parameters with Body TSL at 5850 MHz Impedance, transformed to feed point 59.0 Q — 5.3 jQ Return Loss — 20.4 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.205 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D5GHzV2—1003_Feb19 Page 10 of 16

DASY5 Validation Report for Head TSL Date: 11.02.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 — SN:1003 Communication System: UID 0 — CW; Frequency: 5250 MHz, Frequency: 5400 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz, Frequency: 5850 MHz Medium parameters used: f = 5250 MHz; 0 = 4.5 S/m; s = 36; p = 1000 kg/m3 & Medium parameters used: f = 5400 MHz; 0 = 4.66 S$/m; & = 35.8; p = 1000 kg/m*, Medium parameters used: f = 5600 MHz; 0 = 4.86 S/m; s = 35.5; p = 1000 kg/m3, Medium parameters used: £ = 5750 MHz; 0 = 5.02 S/m; & = 35.3; p = 1000 kg/m*, Medium parameters used: £ = 5850 MHz; 0 = 5.12 S/m; & = 35.2; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(5.45, 5.45, 5.45) @ 5250 MHz, ConvF(5.3, 5.3, 5.3) @ 5400 MHz, ConvF(5, 5, 5) @ 5600 MHz, ConvF(4.98, 4.98, 4.98) @ 5750 MHz, ConvF(4.89, 4.89, 4.89) @ 5850 MHz; Calibrated: 31.12.2018 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAFE4 Sn601; Calibrated: 04.10.2018 e Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 <— DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5250 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 78.96 V/m; Power Drift = —0.09 dB Peak SAR (extrapolated) = 28.2 W/kg SAR(1 g) = 8.09 W/kg; SAR(10 g) = 2.33 W/kg Maximum value of SAR (measured) = 18.1 W/kg Dipole Calibration for Head Tissue/Pin=100mwW, dist=10mm, £=5400 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 76.50 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 30.0 W/kg SAR(1 g) = 8.11 W/kg; SAR(10 g) = 2.31 W/kg Maximum value of SAR (measured) = 18.5 W/kg Certificate No: D5GHzV2—1003_Feb19 Page 11 of 16

Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 77.14 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 31.4 W/kg SAR(1 g) = 8.29 W/kg; SAR(10 g) = 2.38 W/kg Maximum value of SAR (measured) = 19.1 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 74.83 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 32.2 W/kg SAR(1 g) = 8.09 W/kg; SAR(10 g) = 2.3 W/kg Maximum value of SAR (measured) = 19.1 W/kg Dipole Calibration for Head Tissue/Pin=100mwW, dist=10mm, £=5850 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 73.95 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 36.1 W/kg SAR(1 g) = 8.32 W/kg; SAR(10 g) = 2.37 W/kg Maximum value of SAR (measured) = 20.0 W/kg —6.00 —12.00 ~18.00 —24.00 —30.00 0 dB = 20.0 W/kg = 13.01 dBW/kg Certificate No: D5GHzV2—1003_Feb19 Page 12 of 16

Impedance Measurement Plot for Head TSL ie Y¥iew Channel Sweep Calibration Trace Scale Marker System Window Help 5.250000 GHz 47,436 0 2.49303 pF g.8855 D 2 5.400000 GHz 52.713 0 4,0887 pF —7,2084 0 3 5,200000 GHz 54.618 D 14.424pF 1.9704 0 4 5.750000 GHz 54.269 0 4.9795 pF 515598 D 5 5.350000 GHz 59.942 0 3.7681 pF —45139 0 Ch1iAug= 20 Ch1: Start 5.00000 GHz __—— Stop 6.00000 GHz 0.00 GHz —20.670 dB . 5.00 0 GHz —26.378 dB 0.00 d .00 .00 .00 .00 on Ch 1 = Ch1: Start $.00000 GHz —— Stop 5.00000 GHz Status CH 1: C* 1—Port Avg=20 Delay LCL Certificate No: D5GHzV2—1003_Feb19 Page 13 of 16

DASY5 Validation Report for Body TSL Date: 19.02.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 — SN: 1003 Communication System: UID 0 — CW; Frequency: 5250 MHz, Frequency: 5400 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz, Frequency: 5850 MHz Medium parameters used: f = 5250 MHz; 0 = 5.46 S/m; s = 47; p = 1000 kg/m3 , Medium parameters used: f = 5400 MHz; 0 = 5.67 S/m; s = 46.7; p = 1000 kg/m3, Medium parameters used: £ = 5600 MHz; 0 = 5.94 S/m; & = 46.4; p = 1000 kg/m*, Medium parameters used: f = 5750 MHz; 0 = 6.15 S/m; s = 46.1; p = 1000 kg/m3, Medium parameters used: f = 5850 MHz; 0 = 6.29 S/m; s = 45.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(5.26, 5.26, 5.26) @ 5250 MHz, ConvF(4.97, 4.97, 4.97) @ 5400 MHz, ConvF(4.7, 4.7, 4.7) @ 5600 MHz, ConvF(4.59, 4.59, 4.59) @ 5750 MHz, ConvF(4.51, 4.51, 4.51) @ 5850 MHz; Calibrated: 31.12.2018 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAFE4 Sn601; Calibrated: 04.10.2018 e Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 + DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5250 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.46 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 29.2 W/kg SAR(I g) =7.5 W/kg; SAR(10 g) = 2.1 W/kg Maximum value of SAR (measured) = 17.2 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5400 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.70 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 31.2 W/kg SAR(1 g) =7.76 W/kg; SAR(10 g) = 2.17 W/ikg Maximum value of SAR (measured) = 18.1 W/kg Certificate No: D5GHzV2—1003_Feb19 Page 14 of 16

Dipole Calibration for Body Tissue/Pin=100mwW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.54 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 34.1 W/kg SAR(1 g) =7.99 W/kg; SAR(10 g) = 2.25 W/kg Maximum value of SAR (measured) = 19.0 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.82 V/m; Power Drift = —0.03 dB Peak SAR (extrapolated) = 34.4 W/kg SAR(1 g) =7.68 W/kg; SAR(10 g) = 2.16 W/kg Maximum value of SAR (measured) = 18.7 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5850 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.08 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 36.3 W/kg SAR(1 g) =7.89 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 19.3 W/kg —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 19.3 W/kg = 12.86 dBW/kg Certificate No: D5GHzV2—1003_Feb19 Page 15 of 16

Impedance Measurement Plot for Body TSL Channel Sweep Calibration Trace Scale Marker System Window Help 5,250000 GHz 49.481 0 5.0086 pF .0527 0 5400000 GHz 51.098 o ro 66297 pF 4.4456 0 5,800000 GHz 5B .366 0 to 24430 pF 41778 0 4: 5.750000 GHz 58.351 0 12028 pF 230120 »5 5.850000 GHz 592.014 G 51385 pF <12945 0 Ch1Aug= 20 Chi: Start 5.00000 GHz ——— Stop 6.00000 GHz GHz —24.300 d GHz —~24.314 4B .00 .00 00 Ch 1 = Chi: Start 500000 GHz Stop 6,00000 GHz Status CH 1: C" 1—Port Certificate No: D5GHzV2—1003_Feb19 Page 16 of 16


Document Created: 2019-09-03 19:30:44
Document Modified: 2019-09-03 19:30:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC