SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1)

FCC ID: C3K1836

RF Exposure Info

Download: PDF
FCCID_3877039

Plot 1 Date/Time: 5/7/2018 8:01:21 PM Test Laboratory: Microsoft EMC DUT: 1836; Type: Microsoft Wireless Input Device; Serial: 02560002237814 Communication System: UID 0, CW (0); Frequency: 5260 MHz Medium parameters used: f = 5260 MHz; σ = 5.449 S/m; εr = 47.135; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3999; ConvF(5.1, 5.1, 5.1); Calibrated: 12/6/2017;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0  Electronics: DAE4 Sn1445; Calibrated: 11/28/2017  Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218  DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416) Flat-Section MSL 5/7/2018 a 5260MHz Diversity Antenna Bottom 0 mm/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.496 W/kg Flat-Section MSL 5/7/2018 a 5260MHz Diversity Antenna Bottom 0 mm/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.34 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.251 W/kg; SAR(10 g) = 0.069 W/kg Maximum value of SAR (measured) = 0.534 W/kg Test Report#: S‐TR136‐FCCSAR‐1 Issued: 05/23/2018 Page 1 of 6 Microsoft EMC Laboratory

Plot 2 Date/Time: 5/7/2018 7:23:45 PM Test Laboratory: Microsoft EMC DUT: 1836; Type: Microsoft Wireless Input Device; Serial: 02560002237814 Communication System: UID 0, CW (0); Frequency: 5640 MHz Medium parameters used: f = 5640 MHz; σ = 5.648 S/m; εr = 47.555; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3999; ConvF(4.37, 4.37, 4.37); Calibrated: 12/6/2017;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0  Electronics: DAE4 Sn1445; Calibrated: 11/28/2017  Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218  DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416) Flat-Section MSL 5/7/2018 a 5640MHz Diversity Antenna Bottom 0 mm/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.554 W/kg Flat-Section MSL 5/7/2018 a 5640MHz Diversity Antenna Bottom 0 mm/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 11.37 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 1.70 W/kg SAR(1 g) = 0.374 W/kg; SAR(10 g) = 0.125 W/kg Maximum value of SAR (measured) = 0.741 W/kg Test Report#: S‐TR136‐FCCSAR‐1 Issued: 05/23/2018 Page 2 of 6 Microsoft EMC Laboratory

Plot 3 Date/Time: 5/7/2018 4:04:16 PM Test Laboratory: Microsoft EMC DUT: 1836; Type: Microsoft Wireless Input Device; Serial: 02560002237814 Communication System: UID 0, CW (0); Frequency: 5745 MHz Medium parameters used: f = 5745 MHz; σ = 5.836 S/m; εr = 47.72; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3999; ConvF(4.51, 4.51, 4.51); Calibrated: 12/6/2017;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0  Electronics: DAE4 Sn1445; Calibrated: 11/28/2017  Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218  DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416) Flat-Section MSL a 5745MHz Diversity Antenna Bottom 0 mm/Area Scan (17x41x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.655 W/kg Flat-Section MSL a 5745MHz Diversity Antenna Bottom 0 mm/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 12.08 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 1.76 W/kg SAR(1 g) = 0.392 W/kg; SAR(10 g) = 0.127 W/kg Maximum value of SAR (measured) = 0.772 W/kg Test Report#: S‐TR136‐FCCSAR‐1 Issued: 05/23/2018 Page 3 of 6 Microsoft EMC Laboratory

Plot 4 Date/Time: 5/7/2018 12:08:30 PM Test Laboratory: Microsoft EMC DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1158 Communication System: UID 0, CW (0); Frequency: 5250 MHz Medium parameters used (interpolated): f = 5250 MHz; σ = 5.445 S/m; εr = 47.177; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3999; ConvF(5.1, 5.1, 5.1); Calibrated: 12/6/2017;  Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0  Electronics: DAE4 Sn1445; Calibrated: 11/28/2017  Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218  DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416) System Verification @ 5250MHz/Pin=100mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm. Maximum value of SAR (measured) = 9.43 W/kg System Verification @ 5250MHz/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 34.20 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 31.7 W/kg SAR(1 g) = 7.6 W/kg; SAR(10 g) = 2.12 W/kg Maximum value of SAR (measured) = 15.9 W/kg Test Report#: S‐TR136‐FCCSAR‐1 Issued: 05/23/2018 Page 4 of 6 Microsoft EMC Laboratory

Plot 5 Date/Time: 5/7/2018 12:39:14 PM Test Laboratory: Microsoft EMC DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1158 Communication System: UID 0, CW (0); Frequency: 5600 MHz Medium parameters used: f = 5600 MHz; σ = 5.595 S/m; εr = 47.641; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3999; ConvF(4.37, 4.37, 4.37); Calibrated: 12/6/2017;  Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0  Electronics: DAE4 Sn1445; Calibrated: 11/28/2017  Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218  DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416) System Verification @ 5600MHz/Pin=100mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.2 W/kg System Verification @ 5600MHz/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 31.67 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 34.6 W/kg SAR(1 g) = 7.87 W/kg; SAR(10 g) = 2.18 W/kg Maximum value of SAR (measured) = 16.8 W/kg Test Report#: S‐TR136‐FCCSAR‐1 Issued: 05/23/2018 Page 5 of 6 Microsoft EMC Laboratory

Plot 6 Date/Time: 5/7/2018 1:18:00 PM Test Laboratory: Microsoft EMC DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1158 Communication System: UID 0, CW (0); Frequency: 5750 MHz Medium parameters used: f = 5750 MHz; σ = 5.841 S/m; εr = 47.72; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3999; ConvF(4.51, 4.51, 4.51); Calibrated: 12/6/2017;  Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0  Electronics: DAE4 Sn1445; Calibrated: 11/28/2017  Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218  DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416) System Verification @ 5750MHz/Pin=100mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 9.36 W/kg System Verification @ 5750MHz/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 30.49 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 34.4 W/kg SAR(1 g) = 7.49 W/kg; SAR(10 g) = 2.12 W/kg Maximum value of SAR (measured) = 15.8 W/kg Test Report#: S‐TR136‐FCCSAR‐1 Issued: 05/23/2018 Page 6 of 6 Microsoft EMC Laboratory


Document Created: 2018-05-23 13:31:38
Document Modified: 2018-05-23 13:31:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC