11735596-E4V3 FCCIC Report WWAN_Part3

FCC ID: C3K1807

Test Report

Download: PDF
FCCID_3606205

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE Band 26 Reference Frequency: LTE Band 26 Mid Channel 831.5 MHz @ 20°C Limit: to stay +- 2.5 ppm = 2078.750 Hz Power Supply Environment Frequency Deviation Measureed with Time Elapse (Vdc) Temperature (°C) (MHz) Delta (ppm) Limit (ppm) 0.00 50 831.500008 0.004 2.5 0.00 40 831.500011 -0.001 2.5 0.00 30 831.500009 0.002 2.5 0.00 20 831.500011 0 2.5 0.00 10 831.500009 0.002 2.5 0.00 0 831.500010 0.001 2.5 0.00 -10 831.500007 0.005 2.5 0.00 -20 831.500008 0.004 2.5 0.00 -30 831.500010 0.002 2.5 Reference Frequency: LTE Band 26 Mid Channel 831.5 MHz @ 20°C Limit: to stay +- 2.5 ppm = 2078.750 Hz Power Supply Environment Frequency Deviation Measured with Time Elapse (Vdc) Temperature (°C) (MHz) Delta (ppm) Limit (ppm) 0.00 20 831.500011 0 2.5 0.00 20 831.500000 0.013 2.5 0.00 20 831.500000 0.013 2.5 Page 201 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE Band 30 Reference Frequency: LTE Band 30 Mid Channel 2310 MHz @ 20°C Limit: to stay +- 2.5 ppm = 5775.000 Hz Power Supply Environment Frequency Deviation Measureed with Time Elapse (Vdc) Temperature (°C) (MHz) Delta (ppm) Limit (ppm) 0.00 50 2310.000013 0.000 2.5 0.00 40 2310.000013 0.000 2.5 0.00 30 2310.000016 -0.001 2.5 0.00 20 2310.000013 0 2.5 0.00 10 2310.000016 -0.001 2.5 0.00 0 2310.000012 0.000 2.5 0.00 -10 2309.999990 0.010 2.5 0.00 -20 2310.000015 -0.001 2.5 0.00 -30 2309.999989 0.011 2.5 Reference Frequency: LTE Band 30 Mid Channel 2310 MHz @ 20°C Limit: to stay +- 2.5 ppm = 5775.000 Hz Power Supply Environment Frequency Deviation Measured with Time Elapse (Vdc) Temperature (°C) (MHz) Delta (ppm) Limit (ppm) 0.00 20 2310.000013 0 2.5 0.00 20 2310.000000 0.006 2.5 0.00 20 2310.000000 0.006 2.5 Page 202 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE Band 41 Reference Frequency: LTE Band 41 Mid Channel 2593 MHz @ 20°C Limit: to stay +- 2.5 ppm = 6482.500 Hz Power Supply Environment Frequency Deviation Measureed with Time Elapse (Vdc) Temperature (°C) (MHz) Delta (ppm) Limit (ppm) 0.00 50 2593.000016 0.002 2.5 0.00 40 2593.000017 0.002 2.5 0.00 30 2593.000016 0.003 2.5 0.00 20 2593.000022 0 2.5 0.00 10 2593.000016 0.002 2.5 0.00 0 2593.000022 0.000 2.5 0.00 -10 2592.999988 0.013 2.5 0.00 -20 2593.000017 0.002 2.5 0.00 -30 2593.000016 0.002 2.5 Reference Frequency: LTE Band 41 Mid Channel 2593 MHz @ 20°C Limit: to stay +- 2.5 ppm = 6482.500 Hz Power Supply Environment Frequency Deviation Measured with Time Elapse (Vdc) Temperature (°C) (MHz) Delta (ppm) Limit (ppm) 0.00 20 2593.000022 0 2.5 0.00 20 2593.000000 0.009 2.5 0.00 20 2593.000000 0.009 2.5 Page 203 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 17. RADIATED TEST RESULTS 17.1. FIELD STRENGTH OF SPURIOUS RADIATION RULE PART(S) FCC: §2.1051, §22.359, §22.917, §24.238, §27.53, and §90.691 RSS-132, RSS-133, RSS-139, RSS-195, RSS-130, RSS-199 FCC LIMITS FCC: §22.359, §22.917, §24.238, §27.53 The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log (P) dB. §27.53 (g) For operations in the 698–746 MHz band, the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. §27.53 (h) For operations in the 1710–1755 MHz and 2110–2155 MHz bands, the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) by at least 43 + 10 log10(P) dB. FCC: §90.210, and §90.691 (a)(1)For any frequency removed from the EA licensee’s frequency block by up to and including 37.5 kHz, the power of any emission shall be attenuated below the transmitter power (P) in watts by at least 116 Log10 (f/6.1) decibels or 50 + 10 Log10(P) decibels or 80 decibels, whichever is the lesser attenuation, where f is the frequency removed from the center of the outer channel in the block in kilohertz and where f is greater than 12.5 kHz. (a)(2)For any frequency removed from the EA licensee’s frequency block greater than 37.5 kHz, the power of any emission shall be attenuated below the transmitter power (P) in watts by at least 43 + 10Log10 (P) decibels or 80 decibels, whichever is the lesser attenuation, where f is the frequency removed from the center of the outer channel in the block in kilohertz and where f is greater than 37.5 kHz. {NOTE: Use 100 kHz reference bandwidth.} IC LIMITS RSS-133, RSS-132, RSS-139 and RSS-130: The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log (P) dB. RSS130 4.6.1 The power of any unwanted emissions in any 100 kHz bandwidth on any frequency outside the frequency range(s) within which the equipment is designed to operate shall be attenuated below the transmitter power, P (dBW), by at least 43 + 10 log10 p (watts), dB. However, in the 100 kHz band immediately outside the equipment’s operating frequency range, a resolution bandwidth of 30 kHz may be employed. 4.6.2 In addition to the limit outlined in Section 4.6.1 above, equipment operating in the frequency bands 746-756 MHzand 777-787 MHz shall also comply with the following restrictions: (a) The power of any unwanted emissions in any 6.25 kHz bandwidth for all frequencies between 763-775 MHzand 793-806 MHz shall be attenuated below the transmitter power, P (dBW), by at least: (i) 76 + 10 log10 p (watts), dB, for base and fixed equipment, and (ii) 65 + 10 log10 p (watts), dB, for mobile and portable equipment. Page 204 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 RSS199 For mobile subscriber equipment, the power of any unwanted emissions measured as above shall be attenuated (in dB) below the transmitter power, P (dBW), by at least: i) 40 + 10 log10 p from the channel edges to 5 MHz away, ii) 43 + 10 log10 p between 5 MHz and X MHz from the channel edges, and iii) 55 + 10 log10 p at X MHz and beyond from the channel edges. iv) in addition, the attenuation shall be not be less than 43 + 10 log10 p on all frequencies between 2490.5 MHz and 2496 MHz and 55 + 10 log10 p at or below 2490.5 MHz. TEST PROCEDURE For Cellular equipment - Compliance with these rules is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater. In the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. A narrower resolution bandwidth is permitted in all cases to improve measurement accuracy provided the measured power is integrated over the full required measurement bandwidth (i.e. 100 kHz or 1 percent of emission bandwidth, as specified). The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. For PCS equipment - Compliance with these rules is based on the use of measurement instrumentation employing a resolution bandwidth of 1 MHz or greater. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. A narrower resolution bandwidth is permitted in all cases to improve measurement accuracy provided the measured power is integrated over the full required measurement bandwidth (i.e. 1 MHz or 1 percent of emission bandwidth, as specified). The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. Page 205 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 17.1.1. SPURIOUS RADIATION PLOTS WCDMA B2 REL99 B2 HSDPA B5 REL99 B5 HSDPA Page 206 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE Band 2 LTE B2 1.4MHz QPSK LTE B2 1.4MHz 16QAM LTE B2 3MHz QPSK LTE B2 3MHz 16QAM LTE B2 5MHz QPSK LTE B2 5MHz 16QAM Page 207 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE B2 10MHz QPSK LTE B2 10MHz 16QAM LTE B2 15MHz QPSK LTE B2 15MHz 16QAM LTE B2 20MHz QPSK LTE B2 20MHz 16QAM Page 208 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE Band 4 LTE B4 1.4MHz QPSK LTE B4 1.4MHz 16QAM LTE B4 3MHz QPSK LTE B4 3MHz 16QAM LTE B4 5MHz QPSK LTE B4 5MHz 16QAM Page 209 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO:11735596-E4V3 DATE: 10/9/2017 FCC ID: C3K1807 IC: 3048A-1807 LTE B4 10MHz QPSK LTE B4 10MHz 16QAM LTE B4 15MHz QPSK LTE B4 15MHz 16QAM Page 210 of 222 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.


Document Created: 2017-10-11 17:14:26
Document Modified: 2017-10-11 17:14:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC