11735596-S1V1 SAR_App C Highest SAR Test Plots

FCC ID: C3K1807

RF Exposure Info

Download: PDF
FCCID_3592314

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/1/2017 7:10:04 PM W-CDMA Band II Frequency: 1852.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.511 S/m; εr = 51.255; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(8.23, 8.23, 8.23); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Rear/RMC Rel. 99 Ch 9262/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.874 W/kg Rear/RMC Rel. 99 Ch 9262/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.787 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.623 W/kg; SAR(10 g) = 0.366 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.908 W/kg 0 dB = 0.908 W/kg = -0.42 dBW/kg Plot No. 1

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/11/2017 4:09:28 PM W-CDMA Band II Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1880 MHz; σ = 1.586 S/m; εr = 51.653; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(8.23, 8.23, 8.23); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Rear/RMC Rel. 99 Ch 9400/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.993 W/kg Rear/RMC Rel. 99 Ch 9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.642 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 2.33 W/kg SAR(1 g) = 0.936 W/kg; SAR(10 g) = 0.409 W/kg Maximum value of SAR (measured) = 1.75 W/kg 0 dB = 1.75 W/kg = 2.43 dBW/kg Plot No. 2

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/7/2017 7:42:40 AM W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 826.4 MHz; σ = 1.007 S/m; εr = 55.511; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.28, 10.28, 10.28); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Edge 4/RMC Rel. 99 Ch 4132/Area Scan (7x16x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.839 W/kg Edge 4/RMC Rel. 99 Ch 4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.337 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 1.84 W/kg SAR(1 g) = 0.795 W/kg; SAR(10 g) = 0.415 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.46 W/kg 0 dB = 1.46 W/kg = 1.64 dBW/kg Plot No. 3

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/6/2017 9:44:53 PM W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 826.4 MHz; σ = 1.007 S/m; εr = 55.511; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.28, 10.28, 10.28); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Rear/RMC Rel. 99 Ch 4132/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 2.13 W/kg Rear/RMC Rel. 99 Ch 4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 41.987 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 2.99 W/kg SAR(1 g) = 1.36 W/kg; SAR(10 g) = 0.749 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 2.35 W/kg 0 dB = 2.35 W/kg = 3.71 dBW/kg Plot No. 4

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/1/2017 8:11:34 AM LTE B2 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1880 MHz; σ = 1.534 S/m; εr = 51.177; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(8.23, 8.23, 8.23); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Edge 1 Slant/QPSK RB 1,0 Ch 18900/Area Scan (7x18x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.518 W/kg Edge 1 Slant/QPSK RB 1,0 Ch 18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.453 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.629 W/kg SAR(1 g) = 0.389 W/kg; SAR(10 g) = 0.240 W/kg Maximum value of SAR (measured) = 0.539 W/kg Edge 1 Slant/QPSK RB 1,0 Ch 18900/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.453 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.472 W/kg SAR(1 g) = 0.283 W/kg; SAR(10 g) = 0.172 W/kg Maximum value of SAR (measured) = 0.395 W/kg 0 dB = 0.395 W/kg = -4.03 dBW/kg Plot No. 5

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/11/2017 9:02:09 PM LTE B2 Frequency: 1860 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1860 MHz; σ = 1.573 S/m; εr = 51.732; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(8.23, 8.23, 8.23); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Rear/QPSK RB 50,0 Ch 18700/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.04 W/kg Rear/QPSK RB 50,0 Ch 18700/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.236 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.83 W/kg SAR(1 g) = 0.784 W/kg; SAR(10 g) = 0.354 W/kg Maximum value of SAR (measured) = 1.42 W/kg 0 dB = 1.42 W/kg = 1.52 dBW/kg Plot No. 6

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 8/31/2017 6:03:28 PM LTE B4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.534 S/m; εr = 52.876; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(8.48, 8.48, 8.48); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Rear/QPSK RB 1,0 Ch 20175/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.07 W/kg Rear/QPSK RB 1,0 Ch 20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.960 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 1.47 W/kg SAR(1 g) = 0.823 W/kg; SAR(10 g) = 0.465 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.23 W/kg 0 dB = 1.23 W/kg = 0.90 dBW/kg Plot No. 7

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/7/2017 10:36:05 PM LTE B4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.523 S/m; εr = 52.002; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(8.48, 8.48, 8.48); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Rear/QPSK RB 50,0 Ch 20175/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.865 W/kg Rear/QPSK RB 50,0 Ch 20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.055 V/m; Power Drift = -0.20 dB Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = 0.645 W/kg; SAR(10 g) = 0.301 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.11 W/kg 0 dB = 1.11 W/kg = 0.45 dBW/kg Plot No. 8

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 9/5/2017 8:03:53 AM LTE B7 Frequency: 2560 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2560 MHz; σ = 2.141 S/m; εr = 50.882; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(7.75, 7.75, 7.75); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Edge 4/QPSK RB 1,0 Ch 21350/Area Scan (9x23x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.51 W/kg Edge 4/QPSK RB 1,0 Ch 21350/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.986 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 2.42 W/kg SAR(1 g) = 0.982 W/kg; SAR(10 g) = 0.432 W/kg Maximum value of SAR (measured) = 1.75 W/kg 0 dB = 1.75 W/kg = 2.43 dBW/kg Plot No. 9

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 9/8/2017 5:26:17 PM LTE B7 Frequency: 2560 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2560 MHz; σ = 2.141 S/m; εr = 50.882; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(7.75, 7.75, 7.75); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Rear/QPSK RB 100,0 Ch 21350/Area Scan (8x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.34 W/kg Rear/QPSK RB 100,0 Ch 21350/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.980 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 2.56 W/kg SAR(1 g) = 0.878 W/kg; SAR(10 g) = 0.324 W/kg Maximum value of SAR (measured) = 1.77 W/kg 0 dB = 1.77 W/kg = 2.48 dBW/kg Plot No. 10

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/8/2017 8:49:23 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.985 S/m; εr = 55.654; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.66, 10.66, 10.66); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Edge 4/QPSK RB 1,0 Ch 23095/Area Scan (7x19x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.487 W/kg Edge 4/QPSK RB 1,0 Ch 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.843 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 1.01 W/kg SAR(1 g) = 0.467 W/kg; SAR(10 g) = 0.256 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.806 W/kg 0 dB = 0.806 W/kg = -0.94 dBW/kg Plot No. 11

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/8/2017 12:47:37 AM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.985 S/m; εr = 55.654; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.66, 10.66, 10.66); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Rear/QPSK RB 25,0 Ch 23095/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.58 W/kg Rear/QPSK RB 25,0 Ch 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 36.886 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.25 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.555 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.61 W/kg 0 dB = 1.61 W/kg = 2.07 dBW/kg Plot No. 12

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/8/2017 6:49:21 PM LTE Band 13 Frequency: 782 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 782 MHz; σ = 1.054 S/m; εr = 54.995; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.66, 10.66, 10.66); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Edge 4/QPSK RB 1,0 Ch 23230/Area Scan (7x19x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.590 W/kg Edge 4/QPSK RB 1,0 Ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.460 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 1.44 W/kg SAR(1 g) = 0.602 W/kg; SAR(10 g) = 0.315 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.14 W/kg 0 dB = 1.14 W/kg = 0.57 dBW/kg Plot No. 13

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/8/2017 6:40:35 AM LTE Band 13 Frequency: 782 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 782 MHz; σ = 1.054 S/m; εr = 54.995; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.66, 10.66, 10.66); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Rear/QPSK RB 1,0 Ch 23230/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.88 W/kg Rear/QPSK RB 1,0 Ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 38.611 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.68 W/kg SAR(1 g) = 1.24 W/kg; SAR(10 g) = 0.680 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.96 W/kg 0 dB = 1.96 W/kg = 2.92 dBW/kg Plot No. 14

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/5/2017 7:49:18 PM LTE Band 26 Frequency: 831.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 831.5 MHz; σ = 1.014 S/m; εr = 55.442; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.28, 10.28, 10.28); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Edge 4/QPSK RB 1,0 Ch 26865/Area Scan (7x19x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.750 W/kg Edge 4/QPSK RB 1,0 Ch 26865/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.292 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.646 W/kg; SAR(10 g) = 0.366 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.870 W/kg 0 dB = 0.870 W/kg = -0.60 dBW/kg Plot No. 15

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/6/2017 8:10:05 PM LTE Band 26 Frequency: 831.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 831.5 MHz; σ = 1.014 S/m; εr = 55.442; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(10.28, 10.28, 10.28); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Rear/QPSK RB 36,0 Ch 26865/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.87 W/kg Rear/QPSK RB 36,0 Ch 26865/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 39.398 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 2.60 W/kg SAR(1 g) = 1.24 W/kg; SAR(10 g) = 0.681 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 2.04 W/kg 0 dB = 2.04 W/kg = 3.10 dBW/kg Plot No. 16

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 9/8/2017 2:18:38 AM LTE Band 30 Frequency: 2310 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2310 MHz; σ = 1.894 S/m; εr = 52.521; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/8/2017 - Probe: EX3DV4 - SN3991; ConvF(8.05, 8.05, 8.05); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v4.0; Type: QDOVA002AA; Serial: 1196 Edge 4/QPSK RB 1,0 Ch 27710 Repeated/Area Scan (9x23x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.45 W/kg Edge 4/QPSK RB 1,0 Ch 27710 Repeated/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.139 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 2.27 W/kg SAR(1 g) = 0.918 W/kg; SAR(10 g) = 0.424 W/kg Maximum value of SAR (measured) = 1.74 W/kg 0 dB = 1.74 W/kg = 2.41 dBW/kg Plot No. 17

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 9/7/2017 9:51:50 AM LTE Band 30 Frequency: 2310 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2310 MHz; σ = 1.894 S/m; εr = 52.521; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/8/2017 - Probe: EX3DV4 - SN3991; ConvF(8.05, 8.05, 8.05); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI B v4.0; Type: QDOVA002AA; Serial: 1196 Rear/QPSK RB 25,0 Ch 27710/Area Scan (8x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.05 W/kg Rear/QPSK RB 25,0 Ch 27710/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.546 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 1.67 W/kg SAR(1 g) = 0.653 W/kg; SAR(10 g) = 0.262 W/kg Maximum value of SAR (measured) = 1.02 W/kg 0 dB = 1.02 W/kg = 0.09 dBW/kg Plot No. 18

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 9/8/2017 1:33:16 AM LTE B38 Frequency: 2595 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2595 MHz; σ = 2.183 S/m; εr = 50.813; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(7.75, 7.75, 7.75); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Rear/QPSK RB 50,0 Ch 38000/Area Scan (8x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 2.43 W/kg Rear/QPSK RB 50,0 Ch 38000/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.963 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.75 W/kg SAR(1 g) = 1.3 W/kg; SAR(10 g) = 0.478 W/kg Maximum value of SAR (measured) = 2.65 W/kg 0 dB = 2.65 W/kg = 4.23 dBW/kg Plot No. 19

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 9/5/2017 6:49:52 PM LTE B41 Frequency: 2549.5 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2550 MHz; σ = 2.132 S/m; εr = 50.94; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(7.75, 7.75, 7.75); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Edge 4/QPSK RB 1,0 Ch 40185/Area Scan (9x23x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.25 W/kg Edge 4/QPSK RB 1,0 Ch 40185/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.784 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 1.72 W/kg SAR(1 g) = 0.665 W/kg; SAR(10 g) = 0.281 W/kg Maximum value of SAR (measured) = 1.23 W/kg 0 dB = 1.23 W/kg = 0.90 dBW/kg Plot No. 20

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 9/6/2017 4:13:42 PM LTE B41 Frequency: 2593 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 2593 MHz; σ = 2.18 S/m; εr = 50.825; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(7.75, 7.75, 7.75); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Rear/QPSK RB 50,0 Ch 40620/Area Scan (8x13x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 2.25 W/kg Rear/QPSK RB 50,0 Ch 40620/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.153 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 3.21 W/kg SAR(1 g) = 1.09 W/kg; SAR(10 g) = 0.390 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 2.30 W/kg 0 dB = 2.30 W/kg = 3.62 dBW/kg Plot No. 21

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 8/18/2017 2:18:45 PM Wi-Fi 2.4GHz FCC Frequency: 2412 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 2412 MHz; σ = 1.98 S/m; εr = 51.445; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/8/2017 - Probe: EX3DV4 - SN3991; ConvF(7.95, 7.95, 7.95); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v4.0; Type: QDOVA002AA; Serial: 1196 Rear/802.11b_ch 1/Area Scan (9x23x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.490 W/kg Rear/802.11b_ch 1/Zoom Scan Path A(7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.134 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 0.910 W/kg SAR(1 g) = 0.311 W/kg; SAR(10 g) = 0.114 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.678 W/kg Rear/802.11b_ch 1/Zoom Scan Path B(7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.134 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 0.513 W/kg SAR(1 g) = 0.214 W/kg; SAR(10 g) = 0.084 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.390 W/kg 0 dB = 0.390 W/kg = -4.09 dBW/kg Plot No. 22

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 8/25/2017 2:37:31 PM Wi-Fi 5.2GHz FCC Frequency: 5190 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5190 MHz; σ = 5.311 S/m; εr = 47.547; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(4.84, 4.84, 4.84); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Edge 1/802.11n HT40_Ch 38/Area Scan (9x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 2.79 W/kg Edge 1/802.11n HT40_Ch 38/Zoom Scan Path B (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 9.732 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 5.83 W/kg SAR(1 g) = 1.22 W/kg; SAR(10 g) = 0.290 W/kg Maximum value of SAR (measured) = 3.58 W/kg Edge 1/802.11n HT40_Ch 38/Zoom Scan Path A (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 9.732 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 3.25 W/kg SAR(1 g) = 0.690 W/kg; SAR(10 g) = 0.150 W/kg Maximum value of SAR (measured) = 1.97 W/kg 0 dB = 1.97 W/kg = 2.94 dBW/kg Plot No. 23

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 8/30/2017 12:06:50 PM Wi-Fi 5.3GHz FCC Frequency: 5310 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5310 MHz; σ = 5.621 S/m; εr = 47.438; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(4.84, 4.84, 4.84); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Edge 1/ 802.11n HT40_Ch 62/Area Scan (9x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 3.50 W/kg Edge 1/ 802.11n HT40_Ch 62/Zoom Scan Path B (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 22.364 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 6.51 W/kg SAR(1 g) = 1.24 W/kg; SAR(10 g) = 0.273 W/kg Maximum value of SAR (measured) = 3.83 W/kg Edge 1/ 802.11n HT40_Ch 62/Zoom Scan Path A (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 22.364 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 4.55 W/kg SAR(1 g) = 0.921 W/kg; SAR(10 g) = 0.198 W/kg Maximum value of SAR (measured) = 2.72 W/kg 0 dB = 2.72 W/kg = 4.35 dBW/kg Plot No. 24

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/22/2017 8:44:34 PM Wi-Fi 5.6GHz FCC Frequency: 5510 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5510 MHz; σ = 5.637 S/m; εr = 47.73; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(4.2, 4.2, 4.2); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI B v5.0; Type: QD OVA 002 AA; Serial: 1196 Edge 1 Slant/802.11n HT40_Ch 102/Area Scan (9x33x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 2.12 W/kg Edge 1 Slant/802.11n HT40_Ch 102/Zoom Scan Path A (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 15.107 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 4.25 W/kg SAR(1 g) = 0.797 W/kg; SAR(10 g) = 0.182 W/kg Maximum value of SAR (measured) = 2.34 W/kg Edge 1 Slant/802.11n HT40_Ch 102/Zoom Scan Path B (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 15.107 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 2.33 W/kg SAR(1 g) = 0.491 W/kg; SAR(10 g) = 0.117 W/kg Maximum value of SAR (measured) = 1.44 W/kg 0 dB = 1.44 W/kg = 1.58 dBW/kg Plot No. 25

Test Laboratory: UL Verification Services Inc. SAR Lab 4 Date/Time: 8/22/2017 8:08:13 AM Wi-Fi 5.8GHz FCC Frequency: 5755 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5755 MHz; σ = 5.812 S/m; εr = 47.52; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/12/2017 - Probe: EX3DV4 - SN3990; ConvF(4.42, 4.42, 4.42); Calibrated: 3/15/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1248 Edge 1 Slant/802.11n HT40_Ch 151/Area Scan (9x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.91 W/kg Edge 1 Slant/802.11n HT40_Ch 151/Zoom Scan Path A(7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 15.872 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 4.37 W/kg SAR(1 g) = 0.933 W/kg; SAR(10 g) = 0.221 W/kg Maximum value of SAR (measured) = 2.69 W/kg Edge 1 Slant/802.11n HT40_Ch 151/Zoom Scan Path B(7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 15.872 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.59 W/kg SAR(1 g) = 0.329 W/kg; SAR(10 g) = 0.061 W/kg Maximum value of SAR (measured) = 1.01 W/kg 0 dB = 1.01 W/kg = 0.04 dBW/kg Plot No. 26

Test Laboratory: UL Verification Services Inc. SAR Lab 3 Date/Time: 9/15/2017 11:26:17 PM Bluetooth Frequency: 2480 MHz; Duty Cycle: 1:1.29033; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2480 MHz; σ = 2.034 S/m; εr = 51.603; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1239; Calibrated: 7/27/2017 - Probe: EX3DV4 - SN3902; ConvF(7.89, 7.89, 7.89); Calibrated: 5/30/2017; - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QD OVA 002 AA; Serial: 1194 Rear/GFSK DH5_ch 78/Area Scan (9x14x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0450 W/kg Rear/GFSK DH5_ch 78/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.259 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.0710 W/kg SAR(1 g) = 0.028 W/kg; SAR(10 g) = 0.00738 W/kg Maximum value of SAR (measured) = 0.0500 W/kg 0 dB = 0.0500 W/kg = -13.01 dBW/kg Plot No. 27


Document Created: 2017-09-26 13:22:21
Document Modified: 2017-09-26 13:22:21
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC