11600175-S1V1 SAR_App F Dipole Cal. Certificates

FCC ID: C3K1796

RF Exposure Info

Download: PDF
FCCID_3390166

Calibration : Laboratory of BA ul oo/7 g Schweizerischer Kalibrierdienst S Lo Schmid & Partner iiagw/g% c Service suisse d‘étalonnage Engineering AG e s Servizio svizzero di taratura 2z oc Zeughausstrasse 43, 8004 Zurich, Switzerland c/,,///;i\\\\\\\o S —swiss Calibration Service Alubatst Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D2450V2—748_Feb17 CALIBRATION CERTIFICATE Object D2450V2 — SN:748 Calibration procedure(s) QA CAL—O5.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: February 08, 2017 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 06—Apr—16 (No. 217—02288/02289) Apr—17 Power sensor NRP—Z91 SN: 103244 06—Apr—16 (No. 217—02288) Apr—17 Power sensor NRP—Z91 SN: 103245 06—Apr—16 (No. 217—02289) Apr—17 Reference 20 dB Attenuator SN: 5058 (20k) 05—Apr—16 (No. 217—02292) Apr—17 Type—N mismatch combination SN: 5047.2 / 06327 05—Apr—16 (No. 217—02295) Apr—17 Reference Probe EX3DV4 SN: 7349 31—Dec—16 (No. EX3—7349_Dec16) Dec—17 DAE4 SN: 601 04—Jan—17 (No. DAE4—601_Jan17) Jan—18 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: US37292783 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—16) In house check: Oct—18 RF generator R&S SMT—O6 SN: 100972 15—Jun—15 (in house check Oct—16) In house check: Oct—18 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—16) In house check: Oct—17 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician oe—— (g_—— 3 1 Approved by: Katja Pokovic Technical Manager /f%fi Issued: February 9, 2017 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—748_Feb17 Page 1 of 8

Calibration Laboratory of oL/z Sb S Schweizerischer Kalibrierdienst + S ~ Schmid & Partner ifi%@ c Service suisse d‘étalonnage Engmeermg AG o o. Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland {’/, ///Q\\ \\3 S Swiss Calibration Service Zalidabs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORM x,y,2z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Humar: Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: » Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. *« SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—748_Feb17 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz +1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 37.5 +6 % 1.87 mho/m + 6 % Head TSL temperature change during test <0.5 °C se« ———— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.4 W/kg SAR for nominal Head TSL parameters normalized to 1W 52.1 Wi/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.16 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.2 W/kg + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 51.6 +6 % 2.02 mho/m +6 % Body TSL temperature change during test <0.5 °C ———— _o—— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 13.1 W/kg SAR for nominal Body TSL parameters normalized to 1W 51.3 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.06 Wi/kg SAR for nominal Body TSL parameters normalized to 1W 23.9 Wikg + 16.5 % (k=2) Certificate No: D2450V2—748_Feb17 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 53.9 Q — 1.1 jQ Return Loss — 28.1 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 49.6 Q + 1.8 jQ Return Loss — 34.5 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.154 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 01, 2003 Certificate No: D2450V2—748_Feb17 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 08.02.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:748 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.87 S/m; s = 37.5; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(7.72, 7.72, 7.72); Calibrated: 31.12.2016; Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 S$Sn601; Calibrated: 04.01.2017 * Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Head Tissue/Pin=2590 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=>mm, dy=5mm, dz=5mm Reference Value = 113.6 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(I g) = 13.4 W/kg; SAR(10 g) = 6.16 W/kg Maximum value of SAR (measured) = 21.9 W/kg dB 0 —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 21.9 W/kg = 13.40 dBW/kg Certificate No: D2450V2—748_Feb17 Page 5 of 8

Impedance Measurement Plot for Head TSL 8 Feb 2017 16:48:07 CH1) s11 1 U FS 2 53,.974 a —1.0957 a 59.287 pF 2 450.000 00B MHz Del C& fi¥gq 16 H1d CH2 CA Aw 163 H1d START 2 259.000 009 MHz STOP 2 €£590.000 00# MHz Certificate No: D2450V2—748_Feb17 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 08.02.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:748 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 5 = 2.02 S/m; s, = 51.6; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: e« Probe: EX3DV4 — SN7349; ConvF(7.79, 7.79, 7.79); Calibrated: 31.12.2016; Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAF4 S$Sn601; Calibrated: 04.01.2017 & Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 DASY532 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 106.7 V/m; Power Drift = —0.07 dB Peak SAR (extrapolated) = 26.8 W/kg SAR(1 g) = 13.1 W/kg; SAR(10 g) = 6.06 W/kg Maximum value of SAR (measured) =21.1 W/kg —4.00 —8.00 —12.00 —16.00 —20.00 0 dB = 21.1 W/kg = 13.24 dBW/kg Certificate No: D2450V2—748_Feb17 Page 7 of 8

Impedance Measurement Plot for Body TSL 8 Feb 2017 16:47:21 CHA) sii00 i4 uo rs m 49.564 a 4£.8?7B1 s 418. 7E pH 72 4590.000 add MHz Av 168 H1ad CH2Z CA Aw 159 H1d START 2 250.000 000 MHz STOP 2 £590.0090 0gnh MHz Certificate No: D2450V2—748_Feb17 Page 8 of 8

Calibration Laboratory of \\\*‘\‘@"’z, S Schweizerischer Kalibrierdienst Schmid & Partner i%//lmié c Service suisse d‘étalonnage Engineering AG 2 2OA Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 2 /A\\\} S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D5GHzV2—1138_Sep16 [CALIBRATION CERTIFICATE ] Object DSGHzV2 — SN:1138 Calibration procedure(s) QA CAL—22.v2 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: September 22, 2016 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 06—Apr—16 (No. 217—02288/02289) Apr—17 Power sensor NRP—Z91 SN: 103244 06—Apr—16 (No. 217—02288) Apr—17 Power sensor NRP—Z91 SN: 103245 06—Apr—16 (No. 217—02289) Apr—17 Reference 20 dB Attenuator SN: 5058 (20k) 05—Apr—16 (No. 217—02292) Apr—17 Type—N mismatch combination SN: 5047.2 / 06327 05—Apr—16 (No. 217—02295) Apr—17 Reference Probe EX3DV4 SN: 3503 30—Jun—16 (No. EX3—3503_Jun16) Jun—17 DAE4 SN: 601 30—Dec—15 (No. DAE4—601_Dec15) Dec—16 DAE4 SN: 781 04—Sep—15 (No. DAE4—781_Sep15) Sep—16 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (No. 217—02222) In house check: Oct—16 Power sensor HP 8481A SN: US37292783 07—Oct—15 (No. 217—02222) In house check: Oct—16 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (No. 217—02223) In house check: Oct—16 RF generator R&S SMT—O6 SN: 100972 15—Jun—15 (in house check Jun—15) In house check: Oct—16 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—15) In house check: Oct—16 Name Function Signgture Calibrated by: Michael Weber Laboratory Technician Approved by: Katjia Pokoviec Technical Manager M’ Issued: September 23, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1138_Sep16 Page 1 of 19

* & g wslupy Calibration Laboratory of : S‘\\\\@/>> S Schweizerischer Kalibrierdienst Schmid & Partner ;ia% c Service suisse d‘étalonnage Engineering AG = 7\\ < Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 7 /Q\ § S swiss Calibration Service CZulituls® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequenicy range of 30 MHz to 6 GHz)", March 2010 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. *« Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. *« Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. a SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: T‘he measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1138_Sep16 Page 2 of 19

Measurement Conditions DASY system configuration, as far as not g iven on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5200 MHz + 1 MHz Frequency 5600 MHz + 1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.6 + 6 % 4.54 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 7.90 W/kg SAR for nominal Head TSL parameters normalized to 1W 78.3 Wikg + 19.9 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.27 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.4 Wikg + 19.5 % (Kk=2) Certificate No: D5GHzV2—1138_Sep16 Page 3 of 19

Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.0 £ 6 % 4.93 mho/m +6 % Head TSL temperature change during test <0.5 °C =——— ———— SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 100 mW input power 8.31 W/kg SAR for nominal Head TSL parameters normalized to 1W 82.3 Wi/kg + 19.9 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.38 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.5 Wi/kg + 19.5 % (Kk=2) Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 33.7 46 % 5.14 mho/im + 6 % Head TSL temperature change during test <0.5 °C ———— ———— SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.02 W/kg SAR for nominal Head TSL parameters normalized to 1W 79.4 Wikg + 19.9 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.30 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.7 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Sep16 Page 4 of 19

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.5 £ 6 % 5.45 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.A46 W/kg SAR for nominal Body TSL parameters normalized to 1W 74.2 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 210 Wikg SAR for nominal Body TSL parameters normalized to 1W 20.9 W/kg + 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.8 + 6 % 6.00 mho/m + 6 % Body TSL temperature change during test <0.5 °C ———— SAR resulit with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.92 Wi/kg SAR for nominal Body TSL parameters normalized to 1W 78.8 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.22 Wikg SAR for nominal Body TSL parameters normalized to 1W 22.0 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Sep16 Page 5 of 19

Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.4 +6 % 6.29 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.61 W/kg SAR for nominal Body TSL parameters normalized to 1W 75.7 Wikg * 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.13 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.1 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Sep16 Page 6 of 19

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 51.7 Q — 8.2 jQ Return Loss — 21.7 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 56.7 Q — 2.6 |Q Return Loss — 23.4 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 55.1 Q — 2.6 jQ Return Loss — 25.2 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 53.1 Q — 7.1 jQ Return Loss — 22.4 dB Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 58.1 Q — 1.3 jQ Return Loss — 22.4 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 56.5 Q — 1.3 jQ Return Loss — 24.1 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.202 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on May 07, 2012 Certificate No: D5GHzV2—1138_Sep16 Page 7 of 19

Appendix (Additional assessments outside the scope of SCS 0108) Measurement Conditions (f=5200 MHz) DASY system configuration, as far as not given on page 1 and 3. Phantom SAM Head Phantom For usage with cSAR3DV1—R/L SAR result with SAM Head (Top) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 8.48 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 84.1 Wikg + 20.3 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.48 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.5 Wikg + 19.9 % (k=2) SAR result with SAM Head (Mouth) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 8.88 Wikg SAR for nominal Head TSL parameters normalized to 1W 88.1 Wi/kg + 20.3 % (k=2) SAR averaged over 10 ecm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.51 Wikg SAR for nominal Head TSL parameters normalized to 1W 24.8 Wikg + 19.9 % (k=2) SAR result with SAM Head (Neck) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 8.42 Wikg SAR for nominal Head TSL parameters normalized to 1W 83.5 Wikg + 20.3 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.40 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.7 Wikg + 19.9 % (k=2) SAR result with SAM Head (Ear) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 4.96 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 49.2 Wikg + 20.3 % (k=2) SAR averaged over 10 cm*® (10 g) of Head TSL condition SAR measured 100 mW input power 1.69 Wikg SAR for nominal Head TSL parameters normalized to 1W 16.7 Wikg + 19.9 % (k=2) Certificate No: D5GHzV2—1138_Sep16 Page 8 of 19

Appendix (Additional assessments outside the scope of SCS 0108) Measurement Conditions (f=5600 MHz) DASY system configuration, as far as not given on page 1 and 3. Phantom SAM Head Phantom For usage with cSAR3DV1—R/L SAR result with SAM Head (Top) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 9.08 Wikg SAR for nominal Head TSL parameters normalized to 1W 89.9 W/kg + 20.3 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.61 Wikg SAR for nominal Head TSL parameters normalized to 1W 25.8 Wikg + 19.9 % (k=2) SAR result with SAM Head (Mouth) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 9.77 Wikg SAR for nominal Head TSL parameters normalized to 1W 96.7 Wi/kg * 20.3 % (k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 100 mW input power 2.70 Wikg SAR for nominal Head TSL parameters normalized to 1W 26.7 Wikg + 19.9 % (k=2) SAR result with SAM Head (Neck) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 8.84 Wikg SAR for nominal Head TSL parameters normalized to 1W 87.5 Wi/kg + 20.3 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.45 Wikg SAR for nominal Head TSL parameters normalized to 1W 24.2 Wikg + 19.9 % (k=2) SAR result with SAM Head (Ear) SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 100 mW input power 5.72 Wikg SAR for nominal Head TSL parameters normalized to 1W 56.6 W/kg + 20.3 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 1.92 W/kg SAR for nominal Head TSL parameters normalized to 1W 19.0 W/kg + 19.9 % (k=2) Certificate No: D5GHzV2—1138_Sep16 Page 9 of 19

Appendix (Additional assessments outside the scope of SCS 0108) Measurement Conditions (f=5800 MHz) DASY system configuration, as far as not given on page 1 and 3. Phantom SAM Head Phantom For usage with cSAR3DV1—R/L SAR result with SAM Head (Top) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.62 W/kg SAR for nominal Head TSL parameters normalized to 1W 85.3 Wi/kg + 20.3 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.46 Wikg SAR for nominal Head TSL parameters normalized to 1W 24.3 Wikg + 19.9 % (k=2) SAR result with SAM Head (Mouth) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 9.24 Wikg SAR for nominal Head TSL parameters normalized to 1W 91.4 Wi/kg + 20.3 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.50 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.7 Wikg + 19.9 % (k=2) SAR result with SAM Head (Neck) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.31 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 82.2 Wi/kg + 20.3 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.32 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.9 Wikg + 19.9 % (k=2) SAR result with SAM Head (Ear) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 5.44 Wikg SAR for nominal Head TSL parameters normalized to iW 53.8 Wi/kg + 20.3 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 1.82 W/kg SAR for nominal Head TSL parameters normalized to 1W 18.0 Wikg + 19.9 % (k=2) Certificate No: D5GHzV2—1138_Sep16 Page 10 of 19

DASY5 Validation Report for Head TSL Date: 16.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole D5GHzV2; Type: D5GHzV2; Serial: DSGHzV2 — SN: 1138 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: £ = 5200 MHz; 0 = 4.54 S/m; s = 34.6; p = 1000 kg/m3 , Medium parameters used: f = 5600 MHz; 0 = 4.93 S/m; s, = 34; p = 1000 kg/m3 R Medium parameters used: f = 5800 MHz; 0 = 5.14 S/m; s, = 33.7; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(5.59, 5.59, 5.59); Calibrated: 30.06.2016, ConvF(4.89, 4.89, 4.89); Calibrated: 30.06.2016, ConvF(4.85, 4.85, 4.85); Calibrated: 30.06.2016; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.12.2015 e Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5OAA; Serial: 1001 * DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.88 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 28.4 W/kg SAR(1 g) =7.9 W/kg; SAR(1O g) = 2.27 W/kg Maximum value of SAR (measured) = 17.9 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.93 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 32.3 W/kg SAR(1 g) = 8.31 W/kg; SAR(10 g) = 2.38 W/kg Maximum value of SAR (measured) = 19.5 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.37 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 32.5 W/kg SAR(1 g) = 8.02 W/kg; SAR(10 g) = 2.3 W/kg Maximum value of SAR (measured) = 19.0 W/kg Certificate No: D5GHzV2—1138_Sep16 Page 11 of 19

—5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 19.0 W/kg = 12.79 dBW/kg Certificate No: D5GHzV2—1138_Sep16 Page 12 of 19

Impedance Measurement Plot for Head TSL 13 Sep 2016 13:38:04 [CH]J) s11 i4 uU rs 1} 51.693 ¢ —8,2480 a 3.7108 pF 5 200.000 aad MHz CH1 Markers Del 2: 56.723 o —2,6035 aA Cor 5.60000 GHz 3: 55.145 a —2,5938 a 5.80000 GHz A¥q 16 H1d CH2 CH2 Markers 2:—23,404 dB Cor 5.60000 GHz 3:—25,223 dB 5.30000 GHz Av 16" H1d START 5 000.000 900 MHz STOP 6 000.000 900 MHz Certificate No: D5GHzV2—1138_Sep16 Page 13 of 19

DASY5 Validation Report for Body TSL Date: 15.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole D5GHzV2; Type: DSGHzV2; Serial: D5GHzV2 — SN:1138 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 5.45 S/m; s = 47.5; p = 1000 kg/m3 f Medium parameters used: f = 5600 MHz; 0 = 6 S/m; s, = 46.8; p = 1000 kg/m3 , Medium parameters used: £ = 5800 MHz; 0 = 6.29 S/m; &, = 46.4; p = 1000 kg/m" Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(4.99, 4.99, 4.99); Calibrated: 30.06.2016, ConvF(4.35, 4.35, 4.35); Calibrated: 30.06.2016, ConvF(4.27, 4.27, 4.27); Calibrated: 30.06.2016; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) « Electronics: DAF4 Sn601; Calibrated: 30.12.2015 e Phantom: Flat Phantom 5.0 (back); Type: QDOOOP5OAA; Serial: 1002 e DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.46 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 27.7 W/kg SAR(1 g) =7.46 W/kg; SAR(10 g) = 2.1 W/kg Maximum value of SAR (measured) = 17.7 W/kg Dipole Calibration for Body Tissue/Pin=100mwW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.39 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(1 g) =7.92 W/kg; SAR(10 g) = 2.22 W/kg Maximum value of SAR (measured) = 19.4 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.67 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 32.8 W/kg SAR(1 g) =7.61 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 18.9 W/kg Certificate No: D5GHzV2—1138_Sep16 Page 14 of 19

—5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 18.9 W/kg = 12.76 dBW/kg Certificate No: D5GHzV2—1138_Sep16 Page 15 of 19

Impedance Measurement Plot for Body TSL 13 Sep 2016 13:37:17 S11 1 U FS 11 53143 & —fFA4E65 a 4.2828 pF 5 200,000 9g@d MHz ww /f/ CH1 Mark ers Del / 2: 58.145 a / ~4.2656 A Cor !‘ 5.650000 GHz ’ 3: 56.9517 0 1 ~1.2754 & ,‘ 5,.50000 GHz &\5 Fl'u's * 16 & H1d CH2 CH2 Mark ers 21—22.357 dB tar 5.60000 GHz 3:—24,109 dB 5.80000 GHz Aw 159 H1d START 5 900.000 000 MHz STOP £ 000.000 Gh0 MHz Certificate No: D5GHzV2—1138_Sep16 Page 16 of 19

DASY5 Validation Report for SAM Head Date: 22.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole D5GHzV2; Type: D5SGHzV2; Serial: D5GHzV2 — SN:1138 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 4.451 S/m; s; = 34.769; p = 1000 kg/m3 , Medium parameters used: £ = 5600 MHz; 6 = 4.887 S/m; s; = 34.052; p = 1000 kg/m3 , Medium parameters used: f = 5800 MHz; 0 = 5.112 S/m; & = 33.688; p = 1000 kg/m* Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: «_ Probe: EX3DV4 — SN3503; ConvF(5.59, 5.59, 5.59); Calibrated: 30.06.2016, ConvF(4.89, 4.89, 4.89); Calibrated: 30.06.2016, ConvF(4.85, 4.85, 4.85); Calibrated: 30.06.2016; +« Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAFE4 Sn601; Calibrated: 30.12.2015 e Phantom: SAM Head e DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) SAM Head/Top — 5200/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 76.60 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 29.4 W/kg SAR(1 g) = 8.48 W/kg; SAR(10 g) = 2.48 W/kg Maximum value of SAR (measured) = 19.7 W/kg SAM Head/Top — 5600/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 77.22 V/m; Power Drift = —0.09 dB Peak SAR (extrapolated) = 35.1 W/kg SAR(1 g) = 9.08 W/kg; SAR(10 g) = 2.61 W/ikg Maximum value of SAR (measured) = 22.1 W/kg SAM Head/Top — 5800/Zoormm Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 74.00 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 35.1 W/kg SAR(1 g) = 8.62 W/kg; SAR(10 g) = 2.46 W/kg Maximum value of SAR (measured) = 21.4 W/kg Certificate No: D5GHzV2—1138 Sep16 Page 17 of 19

SAM Head/Mouth — 5200/Zoom Scan (8x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 69.63 V/m; Power Drift = —0.09 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(1 g) = 8.88 W/kg; SAR(10 g) = 2.51 W/kg Maximum value of SAR (measured) = 21.6 W/kg SAM Head/Mouth — 5600/Zoom Scan (8x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.47 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 38.7 W/kg SAR(1 g) = 9.77 W/kg; SAR(10 g) = 2.7 W/kg Maximum value of SAR (measured) = 24.8 W/kg SAM Head/Mouth — 5800/Zoom Scan (8x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.29 V/m; Power Drift = —0.03 dB Peak SAR (extrapolated) = 38.8 W/kg SAR(1 g) = 9.24 W/kg; SAR(10 g) = 2.5 W/kg Maximum value of SAR (measured) = 24.2 W/kg SAM Head/Neck — 5200/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 75.17 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 29.1 W/kg SAR(1 g) = 8.42 W/kg; SAR(10 g) = 2.4 W/kg Maximum value of SAR (measured) = 20.0 W/kg SAM Head/Neck — 5600/Zo0oom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 75.52 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 34.1 W/kg SAR(I g) = 8.84 W/kg; SAR(1O g) = 2.45 W/kg Maximum value of SAR (measured) = 21.2 W/kg SAM Head/Neck — 5800/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 72.90 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 33.7 W/kg SAR(1 g) = 8.31 W/kg; SAR(10 g) = 2.32 W/kg Maximum value of SAR (measured) = 21.0 W/kg SAM Head/Ear — 5200/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 56.48 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 16.0 W/kg SAR(1 g) = 4.96 W/kg; SAR(10 g) = 1.69 W/kg Maximum value of SAR (measured) = 10.9 W/kg Certificate No: D5GHzV2—1138_Sep16 Page 18 of 19

SAM Head/Ear — 5600/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 59.01 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 20.3 W/kg SAR(1 g) = 5.72 W/kg; SAR(10 g) = 1.92 W/kg Maximum value of SAR (measured) = 13.1 W/kg SAM Head/Ear — 5800/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 56.70 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 20.6 W/kg SAR(1 g) = 5.44 W/kg; SAR(10 g) = 1.82 W/kg Maximum value of SAR (measured) = 12.8 W/kg dB —3.00 —6.00 —9.00 —12.00 —15.00 0 dB = 12.8 W/kg = 11.07 dBW/kg Certificate No: D5GHzV2—1138_Sep16 Page 19 of 19


Document Created: 2017-03-10 13:05:55
Document Modified: 2017-03-10 13:05:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC