S-TR32-FCC-TP-1

FCC ID: C3K1703

RF Exposure Info

Download: PDF
FCCID_2770945

Microsoft Plot 1 Date/Time: 6/29/2015 5:48:44 PM Test Laboratory: Microsoft EMC DUT: 1703; Type: Portable Computing Device; Serial: 126552157 Communication System: UID 0, 802.11 2.4 GHz (0); Frequency: 2462 MHz Medium parameters used: 1= 2462 MHz; 0 = 1.984 8/m; & = 52.732; p = 1000 ke/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: Probe: EX3DV4 — SN3939; ConvF(6.9, 6.9, 6.9); Calibrated: 7/17/2014; Sensor—Surface: 2mm (Mechanical Surface Detection), z = 1.0, 31.0 Electronics: DAE4 $n1383; Calibrated: 7/11/2014 Phantom: ELT v5.0 — Front; Type: QDOVAOO2AA; Serial: TP:1218 DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Flat—Section MSL 2 2/06/29/15 g mode Chain A Top Omm 10 dBm Tune up 2462 MHz Full Area Scan/Area Scan (§1x301x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value=2.612 V/m; Power Drift=—0.04 dB Fast SAR: SAR(I 5) = 0.920 Wke; SAR(LO g) = 0.304 W/ke Maximum value of SAR (interpolated) = 2.09 W/kg Flat—Section MSL 2 2/06/29/15 g mode Chain A Top Omm 10 dBm Tune up 2462 MHz Full Area Scan/Zoom Scan (7x7x7)/Cube 0: Measurementgrid: dx=Smm, dy=mm, dz=5mm Reference Value=2.612 V/m; Power Drift=—0.04 dB Peak SAR (extrapolated) =3.01 Whkg SAR(I g) = 0.978 Wkg; SAR(1O g) 0.309 Wike Maximum value of SAR (measured) =1.71 W/kg an —10.00 —20.00 30.00 ~40.00 —50.00 Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 1 of 8 Microsoft EMC Laboratory

Microsoft Plot 2 Date/Time: $/31/2015 11:47:00 AM Test Laboratory: Microsoft EMC DUT: 1703; Type: Portable Computing Device; Serial: 126552157 Communication System: UID 0, CW (0); Frequency: 5230 MHz Medium parameters used: 1= 5230 MHz; 0 = 5.541 8/m; & =46.78; p = 1000 ke/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: Probe: EX3DV4 — SN3999; ConvF(S, 5, 5); Calibrated: 5/27/2015; Sensor—Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0 Electronics: DAE4 Sn1445; Calibrated: 5/22/2015 Phantom: ELT v5.0 — Front; Type: QDOVAOO2AA; Serial: TP 3000c DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Flat—Section MSL/08/31/2015 HT40 mode Chain A Top 0 mm 9 dBm Tune up 5230 MHz/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value=15.758 V/m; Power Drift= —0.28 dB Fast SAR: SAR(I 5) = 0.501 Wke; SAR(IO ) = 0.146 W/ke Maximum value of SAR (interpolated) = 1. 19 W/kg Flat—Section MSL/08/31/2015 HT40 mode Chain A Top 0 mm 9 dBm Tune up 5230 MHz/Zoom Scan (7x7x12)/Cube 0: Measurementgrid: dx=4mm, dy=4mm, dz=2mm Reference Value=15.758 V/m; Power Drift= —0.28 dB Peak SAR (extrapolated) = 5.02 Whkg SAR(I g) = 0.801 Wkg; SAR(1O g) 0206 We Maximum value of SAR (measured) =2.05 W/kg an 3.02 —7.64 41.47 15,29 18.11 Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 2 of 8 Microsoft EMC Laboratory

Microsoft Plot 3 Date/Time: 7/1/2015 7:54:41 PM Test Laboratory: Microsoft EMC DUT: 1703; Type: Portable Computing Device; Serial: 118452157 Communication System: UID 0, 802.11 SGHz (0); Frequency: 5590 MHz Medium parameters used: 1= 5590 MHz; 0 = 5.924 8/m; & =46.279; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: * Probe: EX3DV4 — SN3940; ConvF(3.77, 3.77, 3.77); Calibrated: 7/17/2014; * Sensor—Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor— Surface: 2mm (Mechanical Surface Detection), z2 = 1.0, 23.0 * Electronics: DAE4 Sn1384; Calibrated: 7/11/2014 * Phantomn: EL1 v5.0 — Front; Type: QDOVAOOZAA; Serial: TP:1217 * DASYS2 52.8.7(1137); SEMCAD X 14.6.10(7164) Flat—Section MSL_Chain B/Chain B_802.1inHT40_Top Omm_5590 MHz_Repeat/Area Scan (51x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value= 21.005 V/m; Power Drift= 0.18 dB Fast SAR: SAR(I s) = 0.654 Wke; SAR(IO g) = 0.141 Wke Maximum value of SAR (interpolated) = 2.40 W/kg Flat—Section MSL_Chain B/Chain B_802.1inHT40_Top Imm_5590 MHz_Repeat/Zoom Scan (7x7x12)/Cube 0: Measurementgrid: dx=tmm, dy=4mm, dz=2mm Reference Value= 21.005 V/m; Power Drift= 0.18 dB Peak SAR (extrapolated) = 6.29 Whkg SAR(I g) = 0.905 Wkg; SAR(1O g) = 0.158 We Maximum value of SAR (measured) =2.20 W/ke Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 3 of 8 Microsoft EMC Laboratory

Microsoft Plot 4 Date/Time: 7/2/2015 1:59:54 PM Test Laboratory: Microsoft EMC DUT: 1703; Type: Portable Computing Device; Serial: 118452157 Communication System: UID 0, 802.11 SGHz (0); Frequency: 5680 MHz Medium parameters used: 1= 5680 MHz; 0 =6.047 8/m; & =46.127; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: * Probe: EX3DV4 — SN3940; ConvF(3.77, 3.77, 3.77); Calibrated: 7/17/2014; * Sensor—Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor— Surface: 2mm (Mechanical Surface Detection), z2 = 1.0, 23.0 * Electronics: DAE4 Sn1384; Calibrated: 7/11/2014 * Phantomn: EL1 v5.0 — Front; Type: QDOVAOOZAA; Serial: TP:1217 * DASYS2 52.8.7(1137); SEMCAD X 14.6.10(7164) Flat—Section MSL_Chain B/Chain B_802.112_Top Omm_5680 MHz/Area Scan (51x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value= 18.753 V/m; Power Drift=0.13 dB Fast SAR: SAR(I 5) = 0.789 Wke; SAR(IO g) = 0.179 Wke Maximum value of SAR (interpolated) = 2.72 W/kg Flat—Section MSL_Chain B/Chain B_802.11a_Top Omm_5680 MHz/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=tmm, dy=4mm, dz=2mm Reference Value= 18.753 V/m; Power Drift=0.13 dB Peak SAR (extrapolated) =7.93 Whkg SAR(L g) = 1.02 Wike: SAR(LO a) = 0.176 We Maximum value of SAR (measured) =2.44 W/ke dB —10.00 —20.00 —30.00 ~40.00 —50.00 Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 4 of 8 Microsoft EMC Laboratory

Microsoft Plot 5 Date/Time: 8/14/2015 11:16:07 AM Test Laboratory: Microsoft EMC System Check 2.4GHz SN 917 08—14—2015 DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 — SN:917 Communication System: UID 0, CW (0); Frequency: 2450 MHz Medium parameters used: {= 2450 MHz; 0 =1.915 8/m; & = 50.653; p = 1000 kg/m? Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: Probe: EX3DV4 — SN3999; ConvF(7.42, 7.42, 7.42); Calibrated: 5/27/2015; Sensor—Surface: 2mm (Mechanical Surface Detection), z = 1.0, 31.0 Electronics: DAE4 Sn1445; Calibrated: 5/22/2015 Phantom: ELT v5.0 — Front; Type: QDOVAOO2AA; Serial: TP:1218 DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) System Performance Check at Frequencies above 1 GHz/System Check 2450 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value= 59.978 V/m; Power Drift = 0.06 dB Fast SAR: SAR(I 5) = 5.01 W/ke; SAR(LO g) =2.26 Whke Maximum value of SAR (interpolated) = 7.54 W/kg System Performance Check at Frequencies above 1 GHz/System Check 2450 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Z.oom Scan (7x7x7) (7x7x7)/(Cube 0: Measurement grid: dx=5mm, dy=mm, dz=5mm Reference Value= 59.978 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 9.92 Whke SAR(I g) = 4.89 Wike: SAR(LO a) = 2.27 Whke Maximum value of SAR (measured) =7.42 W/ke «8 o 10.00 20.00 —30.00 —10.00 —s0.00 Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 5 of 8 Microsoft EMC Laboratory

E® Microsoft Plot 6 Date/Time: $30/2015 2:59:10 PM Test Laboratory: Microsoft EMC System Check 5.2 GHz SN 1159 08—30—2015 DUT: Dipole DSGHzV2; Type: DSGHzV2; Serial: DSGHzV2 — SN:917 Communication System: UID 0, CW (0); Frequency: 5200 MHz Medium parameters used: {= 5200 MHz; a = 5.499 8/m; &; =46.866; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: Probe: EX3DV4 — SN3999; ConvF(S, 5, 5); Calibrated: 5/27/2015; Sensor—Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0 Electronics: DAE4 Sn1445; Calibrated: 5/22/2015 Phantom: ELT v5.0 — Front; Type: QDOVAOO2AA; Serial: TP 3000c DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) System Performance Check at Frequencies above 1 GHz/System Check 5200 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Area Scan (9x9x1): Measurementgrid: dx=1Omm, dy=1Omm Maximum value of SAR (measured) =13.1 W/kg System Performance Check at Frequencies above 1 GHz/System Check 5200 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Z.oom Scan (7x7x7) (7x7x12)/Cube 0: Measurement grid: dx=imm, dy=4mm, dz=2mm Reference Valu 3.589 V/m; Power Drift=0.07 dB Peak SAR (extrapolated) =32.1 Whkg SAR(L g) = 7.58 Wike: SAR(LO a) = 215 Whke Maximum value of SAR (measured) 15.9 W/kg 0 dB =13.1 W/ke=11.16 dBWi/kg Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 6 of 8 Microsoft EMC Laboratory

Microsoft Plot 7 Date/Time: 6/30/2015 3:53:57 PM Test Laboratory: Microsoft EMC DUT: Dipole DSGHzV2_1158; Type: DSGHzV2; Serial: DSGHzV2 — SN:1158 Communication System: UID 0, CW (0); Frequency: 5600 MHz Medium parameters used: 1= 5600 MHz; 0 = 5.937 8/m; & =46.263; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: Probe: EX3DV4— SN3940; ConvF(3.77, 3.77, 3.77); Calibrated: 7/17/2014; Sensor—Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0 Electronics: DAE4 $n1384; Calibrated: 7/11/2014 Phantom: ELT v5.0 — Front; Type: QDOVAOO2AA; Serial: TP:1217 DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) System Performance Check at Frequencies above 1 GHz/System Check 5600 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value= 61.284 V/m; Power Drift= —0.00 dB Fast SAR: SAR(I 5) = .27 W/ke; SAR(LO g) =2.29 Whke Maximum value of SAR (interpolated) = 18.0 W/kg System Performance Check at Frequencies above 1 GHz/System Check 5600 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Z.oom Scan (7x7x7) (7x7x12)/Cube 0: Measurement grid: dx=imm, dy=4mm, dz=2mm Reference Value= 61.284 V/m; Power Drift= —0.00 dB Peak SAR (extrapolated) 38.5 Whkg SAR(I g) = 8.85 Wike; SAR(LO a) 245 Whke Maximum value of SAR (measured Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 7 of 8 Microsoft EMC Laboratory

Microsoft Plot 8 Date/Time: 7/5/2015 12:54:47 PM Test Laboratory: Microsoft EMC DUT: Dipole DSGHzV2_1158; Type: DSGHzV2; Serial: DSGHzV2 — SN:1158 Communication System: UID 0, CW (0); Frequency: 5800 MHz Medium parameters used: 1= 5800 MHz; 0 =6.272 8/m; & =46.627; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEEAEC/ANSI C63.19—2007) DASY Configuration: Probe: EX3DV4— SN3940; ConvF(3.93, 3.93, 3.93); Calibrated: 7/17/2014; Sensor—Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0 Electronics: DAE4 $n1384; Calibrated: 7/11/2014 Phantom: ELT v5.0 — Front; Type: QDOVAOO2AA; Serial: TP:1217 DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) System Performance Check at Frequencies above 1 GHz/System Check 5800 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value= 55.257 V/m; Power Drift=0.18 dB Fast SAR: SAR(I 5) = 7.08 W/ke; SAR(LO g) = 1.99 Whke Maximum value of SAR (interpolated) = 15.5 W/kg System Performance Check at Frequencies above 1 GHz/System Check 5800 MHz: d=10mm, Pin=20 dBm, dist=2.0mm (EX—Probe)/Z.oom Scan (7x7x7) (7x7x12)/Cube 0: Measurement grid: dx=imm, dy=4mm, dz=2mm Reference Value= 55.257 V/m; Power Drift=0.18 dB Peak SAR (extrapolated) 36.0 Whkg SAR(I g) = 7.92 Wike: SAR(LO a) 219 Whke Maximum value of SAR (measured Test Report#: S—TR32—FCC—TP—1 Issued: 09/16/2015 Page 8 of 8 Microsoft EMC Laboratory


Document Created: 2019-09-12 16:29:53
Document Modified: 2019-09-12 16:29:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC