RF EXPOSURE REPORT

FCC ID: C3K1698

RF Exposure Info

Download: PDF
FCCID_2663600

      FCC 47 CFR § 2.1093
INDUSTRY CANADA RSS 102 ISSUE 5

     RF EXPOSURE REPORT

              FOR

    WIRELESS INPUT DEVICE

     MODEL NUMBER: 1698

        FCC ID: C3K1698
        IC ID: 3048A-1698

  REPORT NUMBER: 15U20723-6

    ISSUE DATE: JUNE 9, 2015

         Prepared for
   MICROSOFT CORPORATION
     ONE MICROSOFT WAY
   REDMOND, WA 98052, U.S.A.

           Prepared by
 UL VERIFICATION SERVICES INC.
     47173 BENICIA STREET
   FREMONT, CA 94538, U.S.A.
       TEL: (510) 771-1000
       FAX: (510) 661-0888


REPORT NO: 15U20723-6                                                                            DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                     IC: 3048A-1698

                                                  Revision History


            Issue
 Rev.       Date               Revisions                                                            Revised By
  --        6/09/15            Initial Issue                                                        F. de Anda




                                      Page 2 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 15U20723-6                                                                                              DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                                       IC: 3048A-1698

                                                TABLE OF CONTENTS
1.     ATTESTATION OF TEST RESULTS ................................................................................. 4

2.     TEST METHODOLOGY ..................................................................................................... 5

3.     REFERENCES ................................................................................................................... 5

4.     FACILITIES AND ACCREDITATION ................................................................................. 5

5.     STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .......................................... 6
     5.1.     FCC ............................................................................................................................ 6
     5.2.     INDUSTRY CANADA ................................................................................................. 7




                                      Page 3 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
     This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 15U20723-6                                                                            DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                     IC: 3048A-1698


1. ATTESTATION OF TEST RESULTS
COMPANY NAME:                       MICROSOFT CORPORATION
                                    ONE MICROSOFT WAY
                                    REDMOND, WA 98052, U.S.A.

EUT DESCRIPTION:                    WIRELESS INPUT DEVICE

MODEL:                              1698

SERIAL NUMBER:                      NA

DATE TESTED:                        NA

                                          APPLICABLE STANDARDS
                               STANDARD                                                 TEST RESULTS
                       FCC 47 CFR § 2.1093
                                                                                    Exempt from SAR testing
              Published RF exposure KDB procedures
               INDUSTRY CANADA RSS 102 ISSUE 5                                      Exempt from SAR testing


 UL Verification Services Inc. calculated the RF Exposure of the above equipment in
accordance with the requirements set forth in the above standards, using test results reported in
the test report documents referenced below and/or documentation furnished by the applicant.
All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc.
based on interpretations of these calculations. The results show that the equipment is capable
of demonstrating compliance with the requirements as documented in this report.

Note: The results documented in this report apply only to the tested sample, under the
conditions and modes of operation as described herein. This document may not be altered or
revised in any way unless done so by UL Verification Services Inc. and all revisions are duly
noted in the revisions section. Any alteration of this document not carried out by UL Verification
Services Inc. will constitute fraud and shall nullify the document. This report must not be used
by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any
agency of the Federal Government, or any agency of any government.

Approved & Released For
UL Verification Services Inc. By:




FRANCISCO DE ANDA
PROJECT LEAD
UL Verification Services Inc.




                                      Page 4 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 15U20723-6                                                                            DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                     IC: 3048A-1698


2. TEST METHODOLOGY
All calculations were made in accordance with FCC KDB 447498 or RSS-102 issue 5 for 10g
extremity SAR.


3. REFERENCES
Maximum declared output power and antenna gain is provided by the applicant.


4. FACILITIES AND ACCREDITATION
The test sites and measurement facilities used to collect data are located at 47173 Benicia
Street, Fremont, California, USA.

UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full
scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm.




                                      Page 5 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 15U20723-6                                                                            DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                     IC: 3048A-1698




5. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS
    5.1.          FCC
SAR test exclusion in accordance with KDB 447498.

The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0, for
1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
        f(GHz) is the RF channel transmit frequency in GHz
        Power and distance are rounded to the nearest mW and mm before calculation
        The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for
transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is <
5 mm, a distance of 5 mm is applied to determine SAR test exclusion.


SAR Exclusion Calculations Table for Portable Devices (separation distance <20cm)
                                                  Maximum Avg                           Calculated
   Antenna             Tx       Frequency         Output power             Separation   Threshold
                                  (MHz)              (mW)                distances (mm)   Value
  WLAN Main           WiFi         2437               7.00                      10          1.1
  WLAN Main           WiFi         5825               7.00                      10          1.7

Separation distance of 10mm was used based on drawing provided by manufacturer. See end
of this report.

Conclusion:
The computed value is < 7.5; therefore, EUT qualifies for Standalone SAR test exclusion.




                                      Page 6 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 15U20723-6                                                                            DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                     IC: 3048A-1698

5.2.    INDUSTRY CANADA

Industry Canada SAR exclusion limits are contained in RSS-102 issue 5. The SAR exclusion
table from RSS-102 issue 5 is reproduced below:




For handheld devices the exemption limit is multiplied by 2.5.
Power used to determine exemption is the higher of the maximum declared conducted average
power or EIRP.

                                                   Max Avg Output
                                Frequency               power                Antenna Gain             EIRP
  Antenna             Tx          (MHz)            dBm       mW                  (dBi)               (mW)
 WLAN Main            WiFi         2437            8.50      7.00                 -0.3                 6.6
 WLAN Main            WiFi         5825            8.50      7.00                  3                  14.1

The minimum antenna to user distance that will be encountered in normal use is 9.74mm(See
drawing at the end of this report). Using the exclusion criteria for 10mm this results in an
exemption limit of 17.5mW at 2450 MHz and 15mW at 5800 MHz.

As the maximum output power is 6.6mW conducted at 2.4GHz and 14.1mW EIRP at 5GHz the
EUT qualifies for SAR test exclusion.




                                      Page 7 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 15U20723-6                                                                            DATE: JUNE 9, 2015
FCC ID: C3K1698                                                                                     IC: 3048A-1698




                                             END OF REPORT




                                      Page 8 of 8
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.



Document Created: 2019-07-14 22:32:14
Document Modified: 2019-07-14 22:32:14

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC