Modular Approval Request rev 2

FCC ID: C3K1683

Cover Letter(s)

Download: PDF
FCCID_2933086

FCC ID: C3K1683



               Modular Approval Request Letter
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
                                                                                               March 15, 2016
Dear Application Examiner,

Microsoft Corporation, 802.11a/b/g/n(/ac) 2T2R dual-band wireless LAN radio, FCC ID: C3K1683, would like
to have your authorization as a modular approval specific to the mobile RF exposure condition.

The requirements of Section 15.212 have been met and shown on the following statements.
Approval Requirement                          Yes No Detailed explanation
a) The modular transmitter must have its own      V           The radio portion of this module has been
   RF shielding.                                              shielded, please see exhibition External Photo.
b) The modular transmitter must have              V           The EUT has buffered data inputs, it is
   buffered modulation/data inputs.                           integrated in chip MT7612U.
c) The modular transmitter must have its own      V           The modular transmitter have its own power
   power supply regulation.                                   supply regulation
d) The modular transmitter must comply with       V           The EUT meets the FCC antenna
   the antenna requirements of section                        requirements. The spurious emission, unique
   15.203 and 15.204(C).                                      antenna connector and photo of antennas are
                                                              shown in the test report.
e) The modular transmitter must be tested in             V    The EUT was tested in specific host. Please
   a stand-alone configuration                                see section Photographs of Test Configuration
                                                              in the test report.
f)   The modular transmitter must be labeled      V           Please see exhibition Label Sample for the
     with its own FCC ID number.                              FCC ID of this module. And also in the
                                                              exhibition Users Manual, there are instructions
                                                              give to the OEM on how to label the end
                                                              product.
g) The modular transmitter must comply with       V           The EUT is compliant with all applicable FCC
   any specific rule or operating requirements                rules. Detail instructions for maintaining
   applicable to the transmitter and the                      compliance are given in the Users Manual.
   manufacturer must provide adequate                         The Class B Digital Device compliance will be
   instructions along with the module to                      addressed when this module is installed in the
   explain any such requirements.                             Host.
h) The modular transmitter must comply with       V            The EUT is compliant with all applicable RF
   any applicable RF exposure requirements.                    exposure requirements. RF Exposure is
                                                               addressed in the RF exposure exhibition.
The transmitter does not meet all eight requirements listed, testing configuration are provided by a specific
host, therefore the module is granted as a limited module that is limited to that specific host.
Please contact me if you have any further questions. Thanks for your attention.
Best Regards,




Amanda Wu / Senior Specialist
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Tel: 886-3-318 3232 ext. 1929, Fax: 886-3-327 0892
Email: amanda.wu@tw.bureauveritas.com



Report No.: RF150720E05



Document Created: 2016-03-15 16:44:39
Document Modified: 2016-03-15 16:44:39

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC