Test Report

FCC ID: C3K1569

Test Report

Download: PDF
FCCID_1889539

FCC TEST REPORT REPORT NO.: RF130107C26 MODEL NO.: 1569 FCC ID: C3K1569 RECEIVED: Jan. 08, 2013 TESTED: Jan. 08 ~ Jan. 09, 2013 ISSUED: Jan. 14, 2013 APPLICANT: Microsoft Corporation ADDRESS: One Microsoft Way, Redmond WA 98052-6399, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF130107C26 1 of 30 Report Format Version 5.0.0

Table of Contents RELEASE CONTROL RECORD ..............................................................................................................3 1. CERTIFICATION .........................................................................................................................4 2. SUMMARY OF TEST RESULTS .................................................................................................5 2.1 MEASUREMENT UNCERTAINTY ..............................................................................................5 3. GENERAL INFORMATION .........................................................................................................6 3.1 GENERAL DESCRIPTION OF EUT............................................................................................6 3.2 DESCRIPTION OF TEST MODES..............................................................................................7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................................8 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST.........................................................................9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS...........................................................10 4. TEST TYPES AND RESULTS ................................................................................................... 11 4.1 RADIATED EMISSION and band edge MEASUREMENT........................................................ 11 4.1.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT ............................... 11 4.1.2 TEST INSTRUMENTS ..............................................................................................................12 4.1.3 TEST PROCEDURES ...............................................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD .....................................................................................13 4.1.5 TEST SETUP ............................................................................................................................14 4.1.6 EUT OPERATING CONDITIONS ..............................................................................................14 4.1.7 TEST RESULTS ........................................................................................................................15 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ...............................................................28 6. INFORMATION ON THE TESTING LABORATORIES..............................................................29 7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................................................................................30 Report No.: RF130107C26 2 of 30 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF130107C26 Original release Jan. 14, 2013 Report No.: RF130107C26 3 of 30 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT: Wireless Mouse MODEL NO.: 1569 BRAND: Microsoft APPLICANT: Microsoft Corporation TESTED: Jan. 08 ~ Jan. 09, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 The above equipment (model: 1569) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Jan. 14, 2013 Celine Chou / Specialist APPROVED BY : , DATE : Jan. 14, 2013 Ken Liu / Manager Report No.: RF130107C26 4 of 30 Report Format Version 5.0.0

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE RESULT REMARK PARAGRAPH Power supply is 1.5Vdc from 15.207 Conducted Emission Test NA batteries. Radiated Emission Test 15.209 Band Edge Measurement Meet the requirement of limit. 15.249 Limit: 50dB less than the peak value of PASS Minimum passing margin is 15.249 (d) fundamental frequency or meet radiated -7.6dB at 256.16MHz. emission limit in section 15.209 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY 30MHz ~ 200MHz 3.34 dB 200MHz ~1000MHz 3.35 dB Radiated emission 1GHz ~ 18GHz 2.26 dB 18GHz ~ 40GHz 1.94 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF130107C26 5 of 30 Report Format Version 5.0.0

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Wireless Mouse MODEL NO. 1569 POWER SUPPLY 1.5Vdc (battery) MODULATION TYPE GFSK OPERATING FREQUENCY 2403 ~ 2480MHz NUMBER OF CHANNEL 24 ANTENNA TYPE PIFA antenna with 4.14dBi gain DATA CABLE N/A I/O PORT N/A ACCESSORY DEVICES N/A NOTE: 1. The EUT has transmitter and receiver functions. 2. The following samples are provided for final test. SAMPLE SERIAL NO. Sample A 671 Sample B 674 Sample C 677 3. The above EUT information is declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF130107C26 6 of 30 Report Format Version 5.0.0

3.2 DESCRIPTION OF TEST MODES 24 channels are provided to this EUT: Channel Frequency Channel Frequency Index Index Group (MHz) Group (MHz) 0 Subset A 2403 1 Subset A 2419 4 Subset B 2429 5 Subset B 2450 8 Subset C 2421 9 Subset C 2431 12 Subset D 2405 13 Subset D 2425 16 Subset E 2423 17 Subset E 2446 20 Subset F 2417 21 Subset F 2427 Channel Frequency Channel Frequency Index Index Group (MHz) Group (MHz) 2 Subset A 2478 3 Subset A 2468 6 Subset B 2470 7 Subset B 2480 10 Subset C 2472 11 Subset C 2454 14 Subset D 2444 15 Subset D 2452 18 Subset E 2456 19 Subset E 2474 22 Subset F 2448 23 Subset F 2476 Report No.: RF130107C26 7 of 30 Report Format Version 5.0.0

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE≥1G RE<1G BM FF A √ √ - - Serial No.: 671 B √ √ - - Serial No.: 674 C √ √ √ √ Serial No.: 677 Where RE<1G: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz BM: Bandedge Measurement FF: Fundamental Frequency NOTE: “-”means no effect. RADIATED EMISSION TEST (ABOVE 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT TESTED FREQUENCY CONFIGURE AVAILABLE CHANNEL MODULATION TYPE (MHZ) MODE A, B, C 2403 to 2480 2403, 2444, 2480 GFSK RADIATED EMISSION TEST (BELOW 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT TESTED FREQUENCY CONFIGURE AVAILABLE CHANNEL MODULATION TYPE (MHZ) MODE A, B, C 2403 to 2480 2403 GFSK BANDEDGE MEASUREMENT: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT TESTED FREQUENCY CONFIGURE AVAILABLE CHANNEL MODULATION TYPE (MHZ) MODE C 2403 to 2480 2403, 2480 GFSK Report No.: RF130107C26 8 of 30 Report Format Version 5.0.0

FUNDAMENTAL MEASUREMENT: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT TESTED FREQUENCY CONFIGURE AVAILABLE CHANNEL MODULATION TYPE (MHZ) MODE C 2403 to 2480 2403, 2480 GFSK TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE≥1G 25deg. C, 65%RH 1.5Vdc Chris Lin RE<1G 25deg. C, 65%RH 1.5Vdc Chris Lin BM 25deg. C, 65%RH 1.5Vdc Chris Lin FF 25deg. C, 65%RH 1.5Vdc Chris Lin 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit. 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST (Power from battery) EUT *Test Table Report No.: RF130107C26 9 of 30 Report Format Version 5.0.0

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Report No.: RF130107C26 10 of 30 Report Format Version 5.0.0

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION AND BAND EDGE MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT The field strength of emissions from intentional radiators operate d within these frequency bands shall comply with the following Field Strength of Field Strength of Fundamental Fundamental Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF130107C26 11 of 30 Report Format Version 5.0.0

4.1.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESIB7 100212 Aug. 06, 2012 Aug. 05, 2013 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100039 Feb. 03, 2012 Feb. 02, 2013 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-160 Apr. 06, 2012 Apr. 05, 2013 SCHWARZBECK HORN Antenna 9120D 209 Sep. 03, 2012 Sep. 02, 2013 SCHWARZBECK HORN Antenna BBHA 9170 148 Jul. 11, 2012 Jul. 10, 2013 SCHWARZBECK Loop Antenna HFH2-Z2 100070 Jan. 31, 2012 Jan. 30, 2014 Preamplifier 8447D 2944A10633 Oct. 25, 2012 Oct. 24, 2013 Agilent Preamplifier 8449B 3008A01964 Oct. 25, 2012 Oct. 24, 2013 Agilent RF signal cable SUCOFLEX 104 250723/4 Aug. 28, 2012 Aug. 27, 2013 HUBER+SUHNNER RF signal cable SUCOFLEX 106 12738/6+309224/4 Aug. 28, 2012 Aug. 27, 2013 HUBER+SUHNNER Software ADT_Radiated_ NA NA NA ADT. V7.6.15.9.2 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller CO2000 017303 NA NA inn-co GmbH Turn Table TT100 TT93021703 NA NA ADT. Turn Table Controller SC100 SC93021703 NA NA ADT. NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The calibration interval of the loop antenna is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in HwaYa Chamber 3. 4. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 5. The FCC Site Registration No. is 988962. 6. The IC Site Registration No. is IC 7450F-3. Report No.: RF130107C26 12 of 30 Report Format Version 5.0.0

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF130107C26 13 of 30 Report Format Version 5.0.0

4.1.5 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF130107C26 14 of 30 Report Format Version 5.0.0

4.1.7 TEST RESULTS ABOVE 1GHz DATA EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2403 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4806.00 49.6 PK 74.0 -24.4 1.11 H 300 10.90 38.70 2 4806.00 19.1 AV 54.0 -34.9 1.11 H 300 -19.60 38.70 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4906.00 49.3 PK 74.0 -24.7 1.07 V 63 10.30 39.00 2 4906.00 18.8 AV 54.0 -35.2 1.07 V 63 -20.20 39.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 15 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2444 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4888.00 50.0 PK 74.0 -24.0 1.05 H 23 11.00 39.00 2 4888.00 19.5 AV 54.0 -34.5 1.05 H 23 -19.50 39.00 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4888.00 51.1 PK 74.0 -22.9 1.05 V 74 12.10 39.00 2 4888.00 20.6 AV 54.0 -33.4 1.05 V 74 -18.40 39.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 16 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2480 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4960.00 50.5 PK 74.0 -23.5 1.14 H 89 11.30 39.20 2 4960.00 20.0 AV 54.0 -34.0 1.14 H 89 -19.20 39.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4960.00 50.1 PK 74.0 -23.9 1.16 V 87 10.90 39.20 2 4960.00 19.6 AV 54.0 -34.4 1.16 V 87 -19.60 39.20 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 17 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2403 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4806.00 49.7 PK 74.0 -24.3 1.05 H 87 11.00 38.70 2 4806.00 19.2 AV 54.0 -34.8 1.05 H 87 -19.50 38.70 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4806.00 50.5 PK 74.0 -23.5 1.28 V 360 11.80 38.70 2 4806.00 20.0 AV 54.0 -34.0 1.28 V 360 -18.70 38.70 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 18 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2444 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4888.00 50.3 PK 74.0 -23.7 1.17 H 25 11.30 39.00 2 4888.00 19.8 AV 54.0 -34.2 1.17 H 25 -19.20 39.00 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4888.00 49.6 PK 74.0 -24.4 1.10 V 47 10.60 39.00 2 4888.00 19.1 AV 54.0 -34.9 1.10 V 47 -19.90 39.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 19 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2480 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4960.00 49.6 PK 74.0 -24.4 1.16 H 45 10.40 39.20 2 4960.00 19.1 AV 54.0 -34.9 1.16 H 45 -20.10 39.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4960.00 51.1 PK 74.0 -22.9 1.18 V 56 11.90 39.20 2 4960.00 20.6 AV 54.0 -33.4 1.18 V 56 -18.60 39.20 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 20 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2403 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE C ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 2390.00 38.4 PK 74.0 -35.6 1.74 H 96 6.30 32.10 2 2390.00 29.3 AV 54.0 -24.7 1.74 H 96 -2.80 32.10 3 2400.00 46.1 PK 74.0 -27.9 1.18 H 52 14.00 32.10 4 2400.00 15.6 AV 54.0 -38.4 1.18 H 52 -16.50 32.10 5 *2403.00 91.1 PK 114.0 -22.9 1.38 H 333 58.90 32.20 6 *2403.00 60.6 AV 94.0 -33.4 1.38 H 333 28.40 32.20 7 4806.00 49.1 PK 74.0 -24.9 1.31 H 360 10.40 38.70 8 4806.00 18.6 AV 54.0 -35.4 1.31 H 360 -20.10 38.70 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 2390.00 41.0 PK 74.0 -33.0 1.12 V 129 8.90 32.10 2 2390.00 26.8 AV 54.0 -27.2 1.12 V 129 -5.30 32.10 3 2400.00 37.4 PK 74.0 -36.6 1.12 V 129 5.30 32.10 4 2400.00 6.9 AV 54.0 -47.1 1.12 V 129 -25.20 32.10 5 *2403.00 82.4 PK 114.0 -31.6 1.74 V 11 50.20 32.20 6 *2403.00 51.9 AV 94.0 -42.1 1.74 V 11 19.70 32.20 7 4806.00 50.4 PK 74.0 -23.6 1.29 V 360 11.70 38.70 8 4806.00 19.9 AV 54.0 -34.1 1.29 V 360 -18.80 38.70 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency 6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 21 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2444 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE C ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2444.00 92.1 PK 114.0 -21.9 1.30 H 323 59.80 32.30 2 *2444.00 61.6 AV 94.0 -32.4 1.30 H 323 29.30 32.30 3 4888.00 49.4 PK 74.0 -24.6 1.00 H 350 10.40 39.00 4 4888.00 18.9 AV 54.0 -35.1 1.00 H 350 -20.10 39.00 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2444.00 83.2 PK 114.0 -30.8 1.19 V 0 50.90 32.30 2 *2444.00 52.7 AV 94.0 -41.3 1.19 V 0 20.40 32.30 3 4888.00 50.6 PK 74.0 -23.4 1.22 V 5 11.60 39.00 4 4888.00 20.1 AV 54.0 -33.9 1.22 V 5 -18.90 39.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency 6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 22 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2480 MHz FREQUENCY RANGE 1 ~ 25GHz DETECTOR Peak (PK) INPUT POWER 1.5Vdc FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MODE C ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2480.00 90.5 PK 114.0 -23.5 1.16 H 320 58.20 32.30 2 *2480.00 60.0 AV 94.0 -34.0 1.16 H 320 27.70 32.30 3 2483.50 45.5 PK 74.0 -28.5 1.15 H 23 13.20 32.30 4 2483.50 15.0 AV 54.0 -39.0 1.15 H 23 -17.30 32.30 5 4960.00 50.8 PK 74.0 -23.2 1.09 H 62 11.60 39.20 6 4960.00 20.3 AV 54.0 -33.7 1.09 H 62 -18.90 39.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2480.00 82.6 PK 114.0 -31.4 1.71 V 353 50.30 32.30 2 *2480.00 52.1 AV 94.0 -41.9 1.71 V 353 19.80 32.30 3 2483.50 37.6 PK 74.0 -36.4 1.00 V 74 5.30 32.30 4 2483.50 7.1 AV 54.0 -46.9 1.00 V 74 -25.20 32.30 5 4960.00 50.5 PK 74.0 -23.5 1.14 V 85 11.30 39.20 6 4960.00 20.0 AV 54.0 -34.0 1.14 V 85 -19.20 39.20 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency 6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Please see page 24 for plotted duty. Report No.: RF130107C26 23 of 30 Report Format Version 5.0.0

20 log (Duty cycle) = 20 log (12 * 0.248 ms / 100 ms) = -30.5 dB Report No.: RF130107C26 24 of 30 Report Format Version 5.0.0

BELOW 1GHz WORST-CASE DATA EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2403 MHz FREQUENCY RANGE Below 1000MHz DETECTOR INPUT POWER 1.5Vdc Quasi-Peak FUNCTION ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MDDE A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 57.12 30.9 QP 40.0 -9.1 2.00 H 358 17.30 13.60 2 199.05 31.1 QP 43.5 -12.4 1.00 H 270 20.00 11.10 3 265.16 37.4 QP 46.0 -8.6 1.00 H 272 23.60 13.80 4 381.82 33.5 QP 46.0 -12.5 2.00 H 178 16.40 17.10 5 527.64 26.7 QP 46.0 -19.3 1.25 H 275 5.90 20.80 6 797.89 31.0 QP 46.0 -15.0 1.50 H 284 5.50 25.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 166.00 27.9 QP 43.5 -15.6 1.00 V 258 14.20 13.70 2 265.16 35.8 QP 46.0 -10.2 1.49 V 202 22.00 13.80 3 385.70 31.9 QP 46.0 -14.1 1.00 V 293 14.70 17.20 4 624.85 25.4 QP 46.0 -20.6 1.49 V 217 2.60 22.80 5 797.89 30.8 QP 46.0 -15.2 1.24 V 255 5.30 25.50 6 900.94 26.8 QP 46.0 -19.2 1.24 V 346 -0.20 27.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF130107C26 25 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2403 MHz FREQUENCY RANGE Below 1000MHz DETECTOR INPUT POWER 1.5Vdc Quasi-Peak FUNCTION ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MDDE B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 57.12 30.5 QP 40.0 -9.5 1.99 H 205 16.90 13.60 2 265.16 38.4 QP 46.0 -7.6 1.00 H 260 24.60 13.80 3 374.04 33.4 QP 46.0 -12.6 1.00 H 163 16.50 16.90 4 527.64 27.7 QP 46.0 -18.3 1.24 H 292 6.90 20.80 5 708.46 24.0 QP 46.0 -22.0 1.24 H 4 0.20 23.80 6 797.89 31.1 QP 46.0 -14.9 1.50 H 288 5.60 25.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 166.00 27.5 QP 43.5 -16.0 1.00 V 238 13.80 13.70 2 265.16 35.7 QP 46.0 -10.3 1.50 V 332 21.90 13.80 3 385.70 31.6 QP 46.0 -14.4 1.00 V 294 14.40 17.20 4 624.85 25.2 QP 46.0 -20.8 1.00 V 179 2.40 22.80 5 797.89 31.3 QP 46.0 -14.7 1.25 V 178 5.80 25.50 6 900.94 27.3 QP 46.0 -18.7 1.25 V 206 0.30 27.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF130107C26 26 of 30 Report Format Version 5.0.0

EUT TEST CONDITION MEASUREMENT DETAIL TESTED FREQUENCY 2403 MHz FREQUENCY RANGE Below 1000MHz DETECTOR INPUT POWER 1.5Vdc Quasi-Peak FUNCTION ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS TEST MDDE C ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 57.12 30.7 QP 40.0 -9.3 2.00 H 244 17.10 13.60 2 199.05 31.3 QP 43.5 -12.2 1.00 H 265 20.20 11.10 3 265.16 38.1 QP 46.0 -7.9 1.00 H 262 24.30 13.80 4 379.87 33.3 QP 46.0 -12.7 2.00 H 181 16.30 17.00 5 527.64 26.5 QP 46.0 -19.5 1.25 H 281 5.70 20.80 6 797.89 29.0 QP 46.0 -17.0 1.00 H 15 3.50 25.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 199.05 29.5 QP 43.5 -14.0 1.00 V 57 18.40 11.10 2 265.16 35.9 QP 46.0 -10.1 1.50 V 202 22.10 13.80 3 389.59 31.7 QP 46.0 -14.3 1.00 V 298 14.40 17.30 4 529.58 24.1 QP 46.0 -21.9 1.00 V 345 3.30 20.80 5 624.85 24.7 QP 46.0 -21.3 1.00 V 177 1.90 22.80 6 799.84 31.7 QP 46.0 -14.3 1.24 V 192 6.10 25.60 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF130107C26 27 of 30 Report Format Version 5.0.0

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF130107C26 28 of 30 Report Format Version 5.0.0

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF130107C26 29 of 30 Report Format Version 5.0.0

7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. ---END--- Report No.: RF130107C26 30 of 30 Report Format Version 5.0.0


Document Created: 2013-01-29 17:24:08
Document Modified: 2013-01-29 17:24:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC