Test Report

FCC ID: C3K1345

Test Report

Download: PDF
FCCID_880646

FCC TEST REPORT REPORT NO.: RF961112A02 MODEL NO.: 1345 RECEIVED: Nov. 12, 2007 TESTED: Nov. 12 ~ 13, 2007 ISSUED: Dec. 10, 2007 APPLICANT: MICROSOFT CORPORATION ADDRESS: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. This test report consists of 26 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF961112A02 1 Report Format Version 2.0.6

Table of Contents 1. CERTIFICATION ..........................................................................................3 2. SUMMARY OF TEST RESULTS..................................................................4 2.1 MEASUREMENT UNCERTAINTY...............................................................4 3. GENERAL INFORMATION ..........................................................................5 3.1 GENERAL DESCRIPTION OF EUT ............................................................5 3.2 DESCRIPTION OF TEST MODES ..............................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .........................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: .............7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................8 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................8 4. TEST TYPES AND RESULTS......................................................................9 4.1 CONDUCTED EMISSION MEASUREMENT ..............................................9 4.2 RADIATED EMISSION MEASUREMENT ...................................................9 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................9 4.2.2 TEST INSTRUMENTS ..............................................................................10 4.2.3 TEST PROCEDURES ...............................................................................11 4.2.4 DEVIATION FROM TEST STANDARD .....................................................11 4.2.5 TEST SETUP ...........................................................................................12 4.2.6 EUT OPERATING CONDITIONS ..............................................................12 4.2.7 TEST RESULTS ........................................................................................13 4.3 FREQUENCY TOLERANCE MEASUREMENT ........................................19 4.3.1 LIMITS OF FREQUENCY TOLERANCE MEASUREMENT ......................19 4.3.2 TEST INSTRUMENTS ..............................................................................19 4.3.3 TEST PROCEDURE .................................................................................19 4.3.4 DEVIATION FROM TEST STANDARD .....................................................19 4.3.5 EUT OPERATING CONDITION ................................................................19 4.3.6 TEST RESULTS ........................................................................................20 4.4 BAND EDGES MEASUREMENT ..............................................................21 4.4.1 LIMITS OF BAND EDGES MEASUREMENT............................................21 4.4.2 TEST INSTRUMENTS ..............................................................................21 4.4.3 TEST PROCEDURE .................................................................................21 4.4.4 DEVIATION FROM TEST STANDARD .....................................................21 4.4.5 EUT OPERATING CONDITION ................................................................21 4.4.6 TEST RESULTS ........................................................................................21 5. PHOTOGRAPHS OF THE TEST CONFIGURATION.................................24 6. INFORMATION ON THE TESTING LABORATORIES ...............................25 7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .......................................................26 Report No.: RF961112A02 2 Report Format Version 2.0.6

1. CERTIFICATION PRODUCT: Microsoft® Wireless Laser Keyboard 7000 BRAND NAME: Microsoft® MODEL NO.: 1345 APPLICANT: MICROSOFT CORPORATION TESTED: Nov. 12 ~ 13, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249), ANSI C63.4-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Dec. 10, 2007 ( Annie Chang / Senior Specialist ) TECHNICAL ACCEPTANCE : , DATE: Dec. 10, 2007 Responsible for RF ( Jamison Chan / Senior Engineer ) APPROVED BY : , DATE: Dec. 10, 2007 ( Ken Liu / Deputy Manager ) Report No.: RF961112A02 3 Report Format Version 2.0.6

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE AND LIMIT RESULT REMARK SECTION The EUT power from 15.207 Conducted Emission Test N/A batteries Radiated Emission Test Band Edge Measurement 15.209 Limit: 50dB less than the Minimum passing margin is 15.249 peak value of fundamental PASS –4.64dB at 2483.500MHz 15.249 (d) frequency or meet radiated emission limit in section 12.209 Frequency Tolerance Meet the requirement of 15.249 (b)(2) PASS Limit: ±0.001% limit. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. MEASUREMENT FREQUENCY UNCERTAINTY 30MHz ~ 1GHz 3.75 dB Radiated emissions 1GHz ~ 40GHz 2.89 dB Report No.: RF961112A02 4 Report Format Version 2.0.6

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Microsoft® Wireless Laser Keyboard 7000 MODEL NO. 1345 FCC ID C3K1345 POWER SUPPLY 3.0Vdc from batteries MODULATION TYPE GFSK TRANSFER RATE 2Mbps FREQUENCY RANGE 2402MHz ~2479MHz NUMBER OF CHANNEL 78 ANTENNA TYPE Strip antenna with -3.75dBi gain DATA CABLE N/A I/O PORTS N/A ASSOCIATED DEVICES N/A NOTE: 1. The EUT is a Microsoft® Wireless Laser Keyboard 7000, which is a transceiver. 2. The EUT has three samples, which are defined as their serial no. as follows: Product Model No. Serial no. EV2-0716-007 Wireless Keyboard 1345 EV2-0716-026 EV2-0716-209 3. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF961112A02 5 Report Format Version 2.0.6

3.2 DESCRIPTION OF TEST MODES 78 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHZ) (MHz) (MHz) (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 19 2421 39 2441 59 2461 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Powered from batteries) Test Table Report No.: RF961112A02 6 Report Format Version 2.0.6

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: EUT Applicable to configure Description mode PLC RE<1G RE³1G APCM A Note √ √ √ Serial No.: EV2-0716-007 B Note √ - - Serial No.: EV2-0716-026 C Note √ - - Serial No.: EV2-0716-209 Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHz RE³1G: Radiated Emission above 1GHz APCM: Antenna Port Conducted Measurement Note: No need to concern of Conducted Emission due to the EUT is powered by batteries. RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION CONFIGURE MODE CHANNEL CHANNEL TYPE A 0 to 77 77 GFSK B 0 to 77 77 GFSK C 0 to 77 77 GFSK RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION CONFIGURE MODE CHANNEL CHANNEL TYPE A 0 to 77 0, 38, 77 GFSK FREQUENCY TOLERANCE:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION CONFIGURE MODE CHANNEL CHANNEL TYPE A 0 to 77 0, 38, 77 GFSK Report No.: RF961112A02 7 Report Format Version 2.0.6

BANDEDGE MEASUREMENT:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION CONFIGURE MODE CHANNEL CHANNEL TYPE A 0 to 77 0, 77 GFSK 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C. (15.249) ANSI C63.4-2003 All test items have been performed and recorded as per the above standards. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit. Report No.: RF961112A02 8 Report Format Version 2.0.6

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT N/A 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF961112A02 9 Report Format Version 2.0.6

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL HP Preamplifier 8447D 2432A03504 May 09, 2008 HP Preamplifier 8449B 3008A01201 Oct. 01, 2008 HP Preamplifier 8449B 3008A01292 Aug. 05, 2008 ROHDE & SCHWARZ TEST ESCI 100613 Jul. 19, 2008 RECEIVER Schwarzbeck Antenna VULB 9168 137 Sep. 13, 2008 Schwarzbeck Antenna VHBA 9123 480 Apr. 18, 2008 EMCO Horn Antenna 3115 6714 Oct. 18, 2008 EMCO Horn Antenna 3115 9312-4192 Apr. 19, 2008 ADT. Turn Table TT100 0306 NA ADT. Tower AT100 0306 NA ADT_Radiated_V Software NA NA 7.6.15 SUHNER RF cable SF104-26.5 CABLE-CH6-17m-01 Dec. 11, 2007 ROHDE & SCHWARZ FSP 40 100036 Mar. 13, 2008 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in ADT Chamber No. 6. 4. The Industry Canada Reference No. IC 3789-6. Report No.: RF961112A02 10 Report Format Version 2.0.6

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi- anechoic. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak method or average method as specified and then reported in data sheet. NOTE: 1. The resolution bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF961112A02 11 Report Format Version 2.0.6

4.2.5 TEST SETUP Ant. Tower 1-4m Variable 3m EUT & Support Units Turn Table 0.8m Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF961112A02 12 Report Format Version 2.0.6

4.2.7 TEST RESULTS RADIATED WORST CASE DATA: BELOW 1GHz TEST MODE A MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 3.0Vdc FREQUENCY RANGE Below 1000MHz ENVIRONMENTAL 21deg. C, 67%RH, DETECTOR Quasi-Peak CONDITIONS 1004Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 119.419 25.57 QP 43.50 -17.93 1.42 H 328 12.29 13.28 2 753.126 28.02 QP 46.00 -17.98 1.32 H 352 0.77 27.25 3 762.846 28.22 QP 46.00 -17.78 1.30 H 334 0.77 27.45 4 805.611 29.21 QP 46.00 -16.79 1.26 H 175 0.92 28.29 5 844.489 29.63 QP 46.00 -16.37 1.20 H 82 0.89 28.74 6 875.591 29.91 QP 46.00 -16.09 1.15 H 268 0.90 29.01 7 900.862 30.04 QP 46.00 -15.96 1.12 H 274 0.82 29.22 8 914.469 30.58 QP 46.00 -15.42 1.05 H 358 1.27 29.31 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 722.024 27.52 QP 46.00 -18.48 1.05 V 358 1.03 26.49 2 760.902 28.94 QP 46.00 -17.06 1.12 V 310 1.53 27.41 3 799.780 29.81 QP 46.00 -16.19 1.18 V 103 1.58 28.23 4 846.433 29.12 QP 46.00 -16.88 1.21 V 127 0.36 28.76 5 873.647 30.84 QP 46.00 -15.16 1.27 V 1 1.84 29.00 6 933.908 30.59 QP 46.00 -15.41 1.33 V 349 1.14 29.45 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF961112A02 13 Report Format Version 2.0.6

TEST MODE B MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 3.0Vdc FREQUENCY RANGE Below 1000MHz ENVIRONMENTAL 21deg. C, 67%RH, DETECTOR Quasi-Peak CONDITIONS 1004Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 749.238 28.68 QP 46.00 -17.32 1.28 H 43 1.52 27.16 2 762.846 28.73 QP 46.00 -17.27 1.25 H 151 1.28 27.45 3 805.611 29.36 QP 46.00 -16.64 1.21 H 103 1.07 28.29 4 842.545 30.09 QP 46.00 -15.91 1.18 H 337 1.37 28.72 5 873.647 30.49 QP 46.00 -15.51 1.14 H 226 1.49 29.00 6 902.806 30.34 QP 46.00 -15.66 1.10 H 178 1.11 29.23 7 920.301 30.70 QP 46.00 -15.30 1.06 H 10 1.34 29.36 8 955.291 30.59 QP 46.00 -15.41 1.02 H 271 0.92 29.67 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 39.719 27.49 QP 40.00 -12.51 1.00 V 322 12.82 14.67 2 745.351 28.25 QP 46.00 -17.75 1.08 V 241 1.19 27.06 3 766.733 29.06 QP 46.00 -16.94 1.12 V 10 1.53 27.53 4 811.443 29.74 QP 46.00 -16.26 1.18 V 52 1.38 28.36 5 850.321 29.87 QP 46.00 -16.13 1.21 V 346 1.06 28.81 6 883.367 30.42 QP 46.00 -15.58 1.29 V 127 1.34 29.08 7 920.301 29.99 QP 46.00 -16.01 1.32 V 268 0.63 29.36 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF961112A02 14 Report Format Version 2.0.6

TEST MODE C MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 3.0Vdc FREQUENCY RANGE Below 1000MHz ENVIRONMENTAL 21deg. C, 67%RH, DETECTOR Quasi-Peak CONDITIONS 1004Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 113.587 28.84 QP 43.50 -14.66 1.33 H 199 16.04 12.80 2 760.902 28.66 QP 46.00 -17.34 1.24 H 208 1.25 27.41 3 805.611 29.74 QP 46.00 -16.26 1.16 H 205 1.45 28.29 4 840.601 30.10 QP 46.00 -15.90 1.12 H 340 1.40 28.70 5 875.591 30.64 QP 46.00 -15.36 1.10 H 142 1.63 29.01 6 889.198 30.47 QP 46.00 -15.53 1.08 H 238 1.35 29.12 7 933.908 30.96 QP 46.00 -15.04 1.02 H 346 1.51 29.45 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 628.717 29.37 QP 46.00 -16.63 1.00 V 115 4.49 24.88 2 688.978 29.74 QP 46.00 -16.26 1.05 V 286 3.97 25.77 3 729.800 29.74 QP 46.00 -16.26 1.10 V 49 3.06 26.68 4 768.677 29.98 QP 46.00 -16.02 1.13 V 349 2.41 27.57 5 792.004 33.06 QP 46.00 -12.94 1.18 V 301 5.00 28.06 6 844.489 29.41 QP 46.00 -16.59 1.24 V 208 0.67 28.74 7 873.647 32.97 QP 46.00 -13.03 1.29 V 106 3.97 29.00 8 908.637 33.44 QP 46.00 -12.56 1.32 V 22 4.17 29.27 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF961112A02 15 Report Format Version 2.0.6

RADIATED WORST CASE DATA: ABOVE 1GHz TEST MODE A MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 3.0Vdc FREQUENCY RANGE 1 ~ 25GHz ENVIRONMENTAL 21deg. C, 67%RH, DETECTOR Peak(PK) CONDITIONS 1004Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.000 58.37 PK 74.00 -15.63 1.05 H 162 23.95 34.42 2 2390.000 45.70 AV 54.00 -8.30 1.05 H 162 11.28 34.42 3 *2402.000 92.52 PK 114.00 -21.48 1.05 H 162 58.08 34.44 4 *2402.000 69.84 AV 94.00 -24.16 1.05 H 162 35.40 34.44 5 4804.000 59.08 PK 74.00 -14.92 1.06 H 269 17.69 41.39 6 4804.000 45.65 AV 54.00 -8.35 1.06 H 269 4.26 41.39 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.000 58.56 PK 74.00 -15.44 1.66 V 89 24.14 34.42 2 2390.000 45.69 AV 54.00 -8.31 1.66 V 89 11.27 34.42 3 *2402.000 87.84 PK 114.00 -26.16 1.66 V 89 53.40 34.44 4 *2402.000 67.38 AV 94.00 -26.62 1.66 V 89 32.94 34.44 5 4804.000 58.10 PK 74.00 -15.90 1.00 V 95 16.71 41.39 6 4804.000 45.50 AV 54.00 -8.50 1.00 V 95 4.11 41.39 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF961112A02 16 Report Format Version 2.0.6

TEST MODE A MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 3.0Vdc FREQUENCY RANGE 1 ~ 25GHz ENVIRONMENTAL 21deg. C, 67%RH, DETECTOR Peak(PK) CONDITIONS 1004Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.000 93.81 PK 114.00 -20.19 1.04 H 160 59.29 34.52 2 *2440.000 70.72 AV 94.00 -23.28 1.04 H 160 36.20 34.52 3 4880.000 60.41 PK 74.00 -13.59 1.08 H 266 18.82 41.59 4 4880.000 47.46 AV 54.00 -6.54 1.08 H 266 5.87 41.59 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.000 87.65 PK 114.00 -26.35 1.00 V 129 53.13 34.52 2 *2440.000 67.42 AV 94.00 -26.58 1.00 V 129 32.90 34.52 3 4880.000 57.23 PK 74.00 -16.77 1.43 V 63 15.64 41.59 4 4880.000 44.83 AV 54.00 -9.17 1.43 V 63 3.24 41.59 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF961112A02 17 Report Format Version 2.0.6

TEST MODE A MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 3.0Vdc FREQUENCY RANGE 1 ~ 25GHz ENVIRONMENTAL 21deg. C, 67%RH, DETECTOR Peak(PK) CONDITIONS 1004Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2479.000 93.93 PK 114.00 -20.07 1.23 H 119 59.33 34.60 2 *2479.000 70.93 AV 94.00 -23.07 1.23 H 119 36.33 34.60 3 2483.500 69.36 PK 74.00 -4.64 1.23 H 119 34.75 34.61 4 2483.500 46.23 AV 54.00 -7.77 1.23 H 119 11.62 34.61 5 4958.000 49.69 PK 74.00 -24.31 1.40 H 267 7.90 41.79 6 4958.000 37.39 AV 54.00 -16.61 1.40 H 267 -4.40 41.79 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2479.000 87.66 PK 114.00 -26.34 1.00 V 97 53.06 34.60 2 *2479.000 67.74 AV 94.00 -26.26 1.00 V 97 33.14 34.60 3 2483.500 65.42 PK 74.00 -8.58 1.00 V 97 30.81 34.61 4 2483.500 45.91 AV 54.00 -8.09 1.00 V 97 11.30 34.61 5 4958.000 54.78 PK 74.00 -19.22 1.58 V 296 12.99 41.79 6 4958.000 42.72 AV 54.00 -11.28 1.58 V 296 0.93 41.79 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF961112A02 18 Report Format Version 2.0.6

4.3 FREQUENCY TOLERANCE MEASUREMENT 4.3.1 LIMITS OF FREQUENCY TOLERANCE MEASUREMENT Limit : ±0.001% 4.3.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SPECTRUM ANALYZER FSP 40 100036 Mar. 13, 2008 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.3.3 TEST PROCEDURE The frequency tolerance of the carrier signal shall be maintained within ±0.001% of the operating frequency over a temperature variation of –20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 EUT OPERATING CONDITION Same as Item 4.2.6 Report No.: RF961112A02 19 Report Format Version 2.0.6

4.3.6 TEST RESULTS TEST MODE A MODULATION TYPE GFSK CHANNEL 0, 38, 77 ENVIRONMENTAL 25deg. C, 70%RH, INPUT POWER 3.0Vdc CONDITIONS 1004hPa TESTED BY Jun Wu CH 0 Carrier Frequency Frequency Frequency TEST CONDITION (MHz) Drift (kHz) error (%) Tnom(℃) 20 Vnom(V) 3 2402.0131 0 0 Vmin(V) 2.55 2402.0318 18.7 0.000779 Tmin(℃) -20 Vmax(V) 3.45 2402.0326 19.5 0.000812 Vmin(V) 2.55 2401.9936 -19.5 -0.000812 Tmax(℃) 50 Vmax(V) 3.45 2401.9945 -18.6 -0.000774 Limit : ±0.001% CH 38 Carrier Frequency Frequency Frequency TEST CONDITION (MHz) Drift (kHz) error (%) Tnom(℃) 20 Vnom(V) 3 2440.0131 0 0 Vmin(V) 2.55 2440.0220 8.9 0.000365 Tmin(℃) -20 Vmax(V) 3.45 2440.0231 10 0.000416 Vmin(V) 2.55 2439.9925 -20.6 -0.000844 Tmax(℃) 50 Vmax(V) 3.45 2439.9932 -19.9 -0.000816 Limit : ±0.001% CH 77 Carrier Frequency Frequency Frequency TEST CONDITION (MHz) Drift (kHz) error (%) Tnom(℃) 20 Vnom(V) 3 2479.0125 0 0 Vmin(V) 2.55 2479.0232 10.7 0.000432 Tmin(℃) -20 Vmax(V) 3.45 2479.0241 11.6 0.000470 Vmin(V) 2.55 2478.9915 -21.0 -0.000847 Tmax(℃) 50 Vmax(V) 3.45 2478.9926 -19.9 -0.000803 Limit : ±0.001% Report No.: RF961112A02 20 Report Format Version 2.0.6

4.4 BAND EDGES MEASUREMENT 4.4.1 LIMITS OF BAND EDGES MEASUREMENT Below –50dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.4.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SPECTRUM ANALYZER FSP 40 100036 Mar. 13, 2008 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.4.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set both RBW and VBW of spectrum analyzer to 100 kHz and 300 kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. The spectrum plots are attached on the following pages. 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 EUT OPERATING CONDITION Same as Item 4.2.6 4.4.6 TEST RESULTS The spectrum plots are attached on the following 4 images. D1 line indicates the highest level, and D2 line indicates the 50dB offset below D1. It shows compliance with the requirement in part 15.249(d). Report No.: RF961112A02 21 Report Format Version 2.0.6

For Mode A: Report No.: RF961112A02 22 Report Format Version 2.0.6

Report No.: RF961112A02 23 Report Format Version 2.0.6

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF961112A02 24 Report Format Version 2.0.6

6. INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, UL, A2LA Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. TAF, BSMI, NCC Netherlands Telefication Singapore GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also Report No.: RF961112A02 25 Report Format Version 2.0.6

7.APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. Report No.: RF961112A02 26 Report Format Version 2.0.6


Document Created: 2007-12-14 09:58:19
Document Modified: 2007-12-14 09:58:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC