Test Report

FCC ID: C3K1123

Test Report

Download: PDF
FCCID_799401

FCC TEST REPORT REPORT NO.: RF960503A01A MODEL NO.: 1123 RECEIVED: May 3, 2007 TESTED: May 3 ~ 14, 2007 ISSUED: May 16, 2007 APPLICANT: MICROSOFT CORPORATION ADDRESS: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. This test report consists of 34 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF960503A01A 1 Report Format Version 2.0.5 Reference No.: 960503A01

Table of Contents 1. CERTIFICATION ..........................................................................................3 2. SUMMARY OF TEST RESULTS..................................................................4 2.1 MEASUREMENT UNCERTAINTY...............................................................4 3. GENERAL INFORMATION ..........................................................................5 3.1 GENERAL DESCRIPTION OF EUT ............................................................5 3.2 DESCRIPTION OF TEST MODES ..............................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .........................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: .............7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................8 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................8 4. TEST TYPES AND RESULTS......................................................................9 4.1 CONDUCTED EMISSION MEASUREMENT ..............................................9 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................9 4.1.2 TEST INSTRUMENTS ................................................................................9 4.1.3 TEST PROCEDURES ...............................................................................10 4.1.4 DEVIATION FROM TEST STANDARD .....................................................10 4.1.5 TEST SETUP ...........................................................................................10 4.1.6 EUT OPERATING CONDITIONS ..............................................................11 4.1.7 TEST RESULTS ........................................................................................12 4.2 RADIATED EMISSION MEASUREMENT .................................................18 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ...............................18 4.2.2 TEST INSTRUMENTS ..............................................................................19 4.2.3 TEST PROCEDURES ...............................................................................20 4.2.4 DEVIATION FROM TEST STANDARD .....................................................20 4.2.5 TEST SETUP ...........................................................................................21 4.2.6 EUT OPERATING CONDITIONS ..............................................................21 4.2.7 TEST RESULTS ........................................................................................22 4.3 FREQUENCY TOLERANCE MEASUREMENT ........................................28 4.3.1 LIMITS OF FREQUENCY TOLERANCE MEASUREMENT ......................28 4.3.2 TEST INSTRUMENTS ..............................................................................28 4.3.3 TEST PROCEDURE .................................................................................28 4.3.4 DEVIATION FROM TEST STANDARD .....................................................28 4.3.5 EUT OPERATING CONDITION ................................................................28 4.3.6 TEST RESULTS ........................................................................................29 4.4 BAND EDGES MEASUREMENT ..............................................................30 4.4.1 LIMITS OF BAND EDGES MEASUREMENT............................................30 4.4.2 TEST INSTRUMENTS ..............................................................................30 4.4.3 TEST PROCEDURE .................................................................................30 4.4.4 DEVIATION FROM TEST STANDARD .....................................................30 4.4.5 EUT OPERATING CONDITION ................................................................30 4.4.6 TEST RESULTS ........................................................................................30 5. INFORMATION ON THE TESTING LABORATORIES ...............................33 APPENDIX-A ....................................................................................................... A-1 Report No.: RF960503A01A 2 Report Format Version 2.0.5 Reference No.: 960503A01

1. CERTIFICATION PRODUCT: Microsoft® 2.4G Transceiver V2.0 BRAND NAME: Microsoft® MODEL NO.: 1123 APPLICANT: MICROSOFT CORPORATION TESTED: May 3 ~ 14, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249), ANSI C63.4-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: May 16, 2007 ( Annie Chang ) TECHNICAL ACCEPTANCE : , DATE: May 16, 2007 Responsible for RF ( Jamison Chan ) APPROVED BY : , DATE: May 16, 2007 ( Ken Liu / Deputy Manager ) Report No.: RF960503A01A 3 Report Format Version 2.0.5 Reference No.: 960503A01

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE RESULT REMARK PARAGRAPH Minimum passing margin is 15.207 Conducted Emission Test PASS –14.63dB at 0.180MHz Radiated Emission Test Band Edge Measurement 15.209 Limit: 50dB less than the Minimum passing margin is 15.249 peak value of fundamental PASS –6.31dB at 2483.500MHz 15.249 (d) frequency or meet radiated emission limit in section 12.209 Frequency Tolerance Meet the requirement of 15.249 (b)(2) PASS Limit: ±0.001% limit. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Uncertainty Conducted emissions 2.44 dB Radiated emissions 3.75 dB Report No.: RF960503A01A 4 Report Format Version 2.0.5 Reference No.: 960503A01

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Microsoft® 2.4G Transceiver V2.0 MODEL NO. 1123 FCC ID C3K1123 POWER SUPPLY 5Vdc from host equipment MODULATION TYPE GFSK TRANSFER RATE 2Mbps FREQUENCY RANGE 2402MHz ~2479MHz NUMBER OF CHANNEL 78 ANTENNA TYPE Strip antenna with -0.64dBi gain DATA CABLE N/A I/O PORTS USB port ASSOCIATED DEVICES N/A NOTE: 1. The EUT is a Microsoft® 2.4G Transceiver V2.0, which includes transmitter & receiver function. 2. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF960503A01A 5 Report Format Version 2.0.5 Reference No.: 960503A01

3.2 DESCRIPTION OF TEST MODES Seventy-eight channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHZ) (MHz) (MHz) (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2431 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 19 2421 39 2441 59 2461 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Powered from host equipment) (AC adapter) Modem Printer Notebook Test Table Report No.: RF960503A01A 6 Report Format Version 2.0.5 Reference No.: 960503A01

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: EUT Applicable to configure Description mode PLC RE<1G RE≥1G APCM A √ √ √ √ Serial No.: EV2-0646-039 B - √ - - Serial No.: EV2-0646-091 C - √ - - Serial No.: EV2-0646-174 Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz APCM: Antenna Port Conducted Measurement POWER LINE CONDUCTED EMISSION TEST: Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE A 0 to 77 0, 38, 77 DSSS GFSK RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE CHANNEL CHANNEL TECHNOLOGY TYPE MODE A 0 to 77 77 DSSS GFSK B 0 to 77 77 DSSS GFSK C 0 to 77 77 DSSS GFSK RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE A 0 to 77 0, 38, 77 DSSS GFSK FREQUENCY TOLERANCE:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE A 0 to 77 0, 38, 77 DSSS GFSK Report No.: RF960503A01A 7 Report Format Version 2.0.5 Reference No.: 960503A01

BANDEDGE MEASUREMENT:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE A 0 to 77 0, 77 DSSS GFSK 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C. (15.249) ANSI C63.4-2003 All test items have been performed and recorded as per the above standards. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID CN-0G5152-486 1 NOTEBOOK DELL D600 FCC DoC Approved 43-487-0213 2 PRINTER EPSON LQ-300+ DCGY017054 FCC DoC Approved 3 MODEM ACEEX 1414 980020520 IFAXDM1414 NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 N/A 1.8m braid shielded wire, terminated with DB25 and Centronics connector via metallic 2 frame, w/o core 1.2 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame, 3 w/o core. NOTE: All power cords of the above support units are non-shielded (1.8m). Report No.: RF960503A01A 8 Report Format Version 2.0.5 Reference No.: 960503A01

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL ROHDE & SCHWARZ Test ESCS 30 838251/021 Nov. 23, 2007 Receiver ROHDE & SCHWARZ Artificial ESH3-Z5 100218 Nov. 21, 2007 Mains Network (for EUT) LISN With Adapter (for EUT) AD10 C10Ada-001 Nov. 21, 2007 ROHDE & SCHWARZ Artificial ESH3-Z5 100219 Nov. 07, 2007 Mains Network (for peripherals) ROHDE & SCHWARZ Artificial ESH3-Z5 100220 Oct. 26, 2007 Mains Network (for peripherals) Software ADT_Cond_V7.3.2 NA NA Software ADT_ISN_V7.3.2 NA NA RF cable (JYEBAO) 5D-FB Cable-C10.01 Mar. 01, 2008 SUHNER Terminator (For ROHDE 65BNC-5001 E1-010773 Feb. 11, 2008 & SCHWARZ LISN) NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in ADT Shielded Room No. 10. 3. The VCCI Site Registration No. C-1852. Report No.: RF960503A01A 9 Report Format Version 2.0.5 Reference No.: 960503A01

4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under Limit - 20dB was not recorded. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. 4.1.5 TEST SETUP V e r tic a l G r o u n d R e f e r e n c e P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n t a l G r o u n d R e fe r e n c e P la n e N o t e : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o t h o f L IS N s (A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. Report No.: RF960503A01A 10 Report Format Version 2.0.5 Reference No.: 960503A01

4.1.6 EUT OPERATING CONDITIONS a. Connected the EUT to a notebook placed on a testing table. b. The notebook ran a test program (provided by manufacturer) to enable EUT under transmission/receiving condition continuously at specific channel frequency. c. The notebook sent "H" messages to its screen. d. The notebook sent messages to printer and the printer prints them out e. The notebook sent messages to modem. f. Repeated c ~ f. Report No.: RF960503A01A 11 Report Format Version 2.0.5 Reference No.: 960503A01

4.1.7 TEST RESULTS CONDUCTED WORST CASE DATA TEST MODE A MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 25deg. C, 70%RH, PHASE Line 1 CONDITIONS 1003hPa TESTED BY Jun Wu Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.180 0.20 49.64 - 49.84 - 64.47 54.47 -14.63 - 2 0.240 0.20 42.65 - 42.85 - 62.10 52.10 -19.25 - 3 2.953 0.45 30.02 - 30.47 - 56.00 46.00 -25.53 - 4 3.793 0.49 36.86 - 37.35 - 56.00 46.00 -18.65 - 5 15.121 1.11 36.17 - 37.28 - 60.00 50.00 -22.72 - 6 16.152 1.17 35.85 - 37.02 - 60.00 50.00 -22.98 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960503A01A 12 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 25deg. C, 70%RH, PHASE Line 2 CONDITIONS 1003hPa TESTED BY Jamison Chan Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.181 0.20 48.44 - 48.64 - 64.43 54.43 -15.79 - 2 0.240 0.20 41.17 - 41.37 - 62.10 52.10 -20.73 - 3 3.621 0.38 36.50 - 36.88 - 56.00 46.00 -19.12 - 4 4.164 0.40 34.38 - 34.78 - 56.00 46.00 -21.22 - 5 14.734 0.78 33.25 - 34.03 - 60.00 50.00 -25.97 - 6 16.539 0.86 30.43 - 31.29 - 60.00 50.00 -28.71 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960503A01A 13 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 25deg. C, 70%RH, PHASE Line 1 CONDITIONS 1003hPa TESTED BY Jun Wu Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.181 0.20 48.19 - 48.39 - 64.43 54.43 -16.04 - 2 0.240 0.20 42.57 - 42.77 - 62.10 52.10 -19.33 - 3 3.191 0.46 32.03 - 32.49 - 56.00 46.00 -23.51 - 4 3.672 0.48 33.96 - 34.44 - 56.00 46.00 -21.56 - 5 14.684 1.07 34.43 - 35.50 - 60.00 50.00 -24.50 - 6 15.465 1.13 35.07 - 36.20 - 60.00 50.00 -23.80 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960503A01A 14 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 25deg. C, 70%RH, PHASE Line 2 CONDITIONS 1003hPa TESTED BY Jamison Chan Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.181 0.20 47.19 - 47.39 - 64.43 54.43 -17.04 - 2 0.240 0.20 41.96 - 42.16 - 62.10 52.10 -19.94 - 3 3.125 0.36 33.08 - 33.44 - 56.00 46.00 -22.56 - 4 3.664 0.38 36.75 - 37.13 - 56.00 46.00 -18.87 - 5 15.266 0.81 37.68 - 38.49 - 60.00 50.00 -21.51 - 6 16.766 0.87 37.40 - 38.27 - 60.00 50.00 -21.73 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960503A01A 15 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 25deg. C, 70%RH, PHASE Line 1 CONDITIONS 1003hPa TESTED BY Jun Wu Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.181 0.20 48.01 - 48.21 - 64.43 54.43 -16.22 - 2 0.240 0.20 42.28 - 42.48 - 62.10 52.10 -19.62 - 3 1.797 0.40 34.70 - 35.10 - 56.00 46.00 -20.90 - 4 3.961 0.50 37.85 - 38.35 - 56.00 46.00 -17.65 - 5 14.828 1.09 36.31 - 37.40 - 60.00 50.00 -22.60 - 6 17.945 1.28 31.23 - 32.51 - 60.00 50.00 -27.49 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960503A01A 16 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 25deg. C, 70%RH, PHASE Line 2 CONDITIONS 1003hPa TESTED BY Jamison Chan Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.181 0.20 47.03 - 47.23 - 64.43 54.43 -17.20 - 2 0.239 0.20 41.63 - 41.83 - 62.14 52.14 -20.31 - 3 1.680 0.30 34.66 - 34.96 - 56.00 46.00 -21.04 - 4 3.781 0.39 37.88 - 38.27 - 56.00 46.00 -17.73 - 5 15.500 0.82 36.14 - 36.96 - 60.00 50.00 -23.04 - 6 16.695 0.87 31.55 - 32.42 - 60.00 50.00 -27.58 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960503A01A 17 Report Format Version 2.0.5 Reference No.: 960503A01

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF960503A01A 18 Report Format Version 2.0.5 Reference No.: 960503A01

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL HP Preamplifier 8447D 2432A03504 May 21, 2007 HP Preamplifier 8449B 3008A01924 Sep. 05, 2007 HP Preamplifier 8449B 3008A01638 Sep. 17, 2007 ROHDE & SCHWARZ TEST ESI7 836697/012 Oct. 24, 2007 RECEIVER Schwarzbeck Antenna VULB 9168 137 Oct. 01, 2007 Schwarzbeck Antenna VHBA 9123 480 Apr. 18, 2008 EMCO Horn Antenna 3115 6714 Oct. 24, 2007 EMCO Horn Antenna 3115 9312-4192 Apr. 19, 2008 ADT. Turn Table TT100 0306 NA ADT. Tower AT100 0306 NA ADT_Radiated_V Software NA NA 7.6.15 SUHNER RF cable SF104-26.5 CABLE-CH6-17m-01 Dec. 11, 2007 ROHDE & SCHWARZ FSP 40 100036 Mar. 13, 2008 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in ADT Chamber No. 6. 4. The Industry Canada Reference No. IC 3789-6. Report No.: RF960503A01A 19 Report Format Version 2.0.5 Reference No.: 960503A01

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi- anechoic. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak method or average method as specified and then reported in data sheet. NOTE: 1. The resolution bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF960503A01A 20 Report Format Version 2.0.5 Reference No.: 960503A01

4.2.5 TEST SETUP Ant. Tower 1-4m Variable 3m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF960503A01A 21 Report Format Version 2.0.5 Reference No.: 960503A01

4.2.7 TEST RESULTS RADIATED WORST CASE DATA: BELOW 1GHz TEST MODE A MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE Below 1000MHz (SYSTEM) ENVIRONMENTAL 23deg. C, 70%RH, DETECTOR Quasi-Peak CONDITIONS 1001Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 103.868 29.90 QP 43.50 -13.60 2.00 H 322 17.76 12.14 2 195.230 32.29 QP 43.50 -11.21 1.50 H 109 21.84 10.45 3 500.421 32.62 QP 46.00 -13.38 1.50 H 40 9.76 22.86 4 545.130 32.60 QP 46.00 -13.40 1.50 H 64 7.75 24.85 5 663.707 35.15 QP 46.00 -10.85 1.50 H 22 9.57 25.58 6 733.687 33.16 QP 46.00 -12.84 1.00 H 10 5.87 27.30 7 867.816 37.36 QP 46.00 -8.64 1.00 H 43 8.26 29.10 8 945.571 34.80 QP 46.00 -11.20 1.00 H 145 4.24 30.56 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 129.138 33.10 QP 43.50 -10.40 1.50 V 46 20.92 12.18 2 195.230 35.77 QP 43.50 -7.73 1.00 V 142 24.25 11.52 3 599.559 32.66 QP 46.00 -13.34 1.00 V 55 8.34 24.32 4 665.651 36.93 QP 46.00 -9.07 1.00 V 199 11.81 25.12 5 729.800 34.92 QP 46.00 -11.08 1.00 V 187 7.98 26.93 6 867.816 39.40 QP 46.00 -6.60 1.50 V 205 10.56 28.84 7 941.683 32.15 QP 46.00 -13.85 1.00 V 106 1.66 30.49 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960503A01A 22 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE B MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE Below 1000MHz (SYSTEM) ENVIRONMENTAL 23deg. C, 70%RH, DETECTOR Quasi-Peak CONDITIONS 1001Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 193.287 29.83 QP 43.50 -13.67 1.45 H 103 19.25 10.58 2 545.130 33.64 QP 46.00 -12.36 1.39 H 79 8.79 24.85 3 572.345 32.07 QP 46.00 -13.93 1.28 H 97 7.08 24.99 4 667.595 35.26 QP 46.00 -10.74 1.24 H 178 9.65 25.61 5 729.800 33.61 QP 46.00 -12.39 1.19 H 19 6.47 27.14 6 865.872 38.13 QP 46.00 -7.87 1.05 H 100 9.08 29.05 7 931.964 39.29 QP 46.00 -6.71 1.01 H 148 8.93 30.36 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 129.138 31.89 QP 43.50 -11.61 1.00 V 25 19.71 12.18 2 195.230 35.12 QP 43.50 -8.38 1.00 V 10 23.60 11.52 3 667.595 39.03 QP 46.00 -6.97 1.02 V 286 13.88 25.15 4 733.687 33.78 QP 46.00 -12.22 1.26 V 82 6.68 27.10 5 865.872 39.28 QP 46.00 -6.72 1.39 V 199 10.48 28.80 6 941.683 33.13 QP 46.00 -12.87 1.45 V 85 2.64 30.49 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960503A01A 23 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE C MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE Below 1000MHz (SYSTEM) ENVIRONMENTAL 23deg. C, 70%RH, DETECTOR Quasi-Peak CONDITIONS 1001Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 193.287 31.05 QP 43.50 -12.45 1.59 H 280 20.47 10.58 2 665.651 35.12 QP 46.00 -10.88 1.32 H 160 9.53 25.59 3 731.743 35.32 QP 46.00 -10.68 1.30 H 211 8.10 27.22 4 825.050 32.06 QP 46.00 -13.94 1.25 H 283 3.89 28.17 5 865.872 37.27 QP 46.00 -8.73 1.18 H 112 8.22 29.05 6 931.964 39.26 QP 46.00 -6.74 1.02 H 199 8.90 30.36 7 941.683 32.33 QP 46.00 -13.67 1.04 H 166 1.82 30.51 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 123.307 34.52 QP 43.50 -8.98 1.00 V 10 23.11 11.40 2 195.230 35.13 QP 43.50 -8.37 1.00 V 334 23.61 11.52 3 399.339 32.48 QP 46.00 -13.52 1.02 V 16 13.69 18.79 4 663.707 36.57 QP 46.00 -9.43 1.32 V 268 11.48 25.09 5 729.800 35.28 QP 46.00 -10.72 1.39 V 94 8.35 26.93 6 795.892 34.45 QP 46.00 -11.55 1.45 V 304 6.43 28.02 7 865.872 36.83 QP 46.00 -9.17 1.42 V 76 8.03 28.80 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960503A01A 24 Report Format Version 2.0.5 Reference No.: 960503A01

RADIATED WORST CASE DATA: ABOVE 1GHz TEST MODE A MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 1 ~ 25GHz (SYSTEM) ENVIRONMENTAL 23deg. C, 70%RH, DETECTOR Peak(PK) CONDITIONS 1001Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.000 60.34 PK 74.00 -13.66 1.41 H 282 25.92 34.42 2 2390.000 47.11 AV 54.00 -6.89 1.41 H 282 12.69 34.42 3 *2402.000 93.68 PK 114.00 -20.32 1.41 H 282 59.24 34.44 4 *2402.000 79.87 AV 94.00 -14.13 1.41 H 282 45.43 34.44 5 4804.000 55.84 PK 74.00 -18.16 1.00 H 18 14.44 41.39 6 4804.000 47.00 AV 54.00 -7.00 1.00 H 18 5.60 41.39 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.000 58.30 PK 74.00 -15.70 1.26 V 11 23.88 34.42 2 2390.000 47.10 AV 54.00 -6.90 1.26 V 11 12.68 34.42 3 *2402.000 91.76 PK 114.00 -22.24 1.26 V 11 57.32 34.44 4 *2402.000 77.97 AV 94.00 -16.03 1.26 V 11 43.53 34.44 5 4804.000 50.61 PK 74.00 -23.39 1.25 V 26 9.21 41.39 6 4804.000 42.51 AV 54.00 -11.49 1.25 V 26 1.11 41.39 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF960503A01A 25 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 1 ~ 25GHz (SYSTEM) ENVIRONMENTAL 23deg. C, 70%RH, DETECTOR Peak(PK) CONDITIONS 1001Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.000 93.17 PK 114.00 -20.83 1.42 H 221 58.65 34.52 2 *2440.000 79.71 AV 94.00 -14.29 1.42 H 221 45.19 34.52 3 4880.000 54.83 PK 74.00 -19.17 1.00 H 19 13.24 41.59 4 4880.000 46.92 AV 54.00 -7.08 1.00 H 19 5.33 41.59 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.000 91.14 PK 114.00 -22.86 1.51 V 14 56.62 34.52 2 *2440.000 77.75 AV 94.00 -16.25 1.51 V 14 43.23 34.52 3 4880.000 50.35 PK 74.00 -23.65 1.19 V 3 8.76 41.59 4 4880.000 40.64 AV 54.00 -13.36 1.19 V 3 -0.95 41.59 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF960503A01A 26 Report Format Version 2.0.5 Reference No.: 960503A01

TEST MODE A MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 1 ~ 25GHz (SYSTEM) ENVIRONMENTAL 23deg. C, 70%RH, DETECTOR Peak(PK) CONDITIONS 1001Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2479.000 92.83 PK 114.00 -21.17 1.38 H 194 58.23 34.60 2 *2479.000 79.54 AV 94.00 -14.46 1.38 H 194 44.94 34.60 3 2483.500 67.69 PK 74.00 -6.31 1.38 H 194 33.08 34.61 4 2483.500 47.44 AV 54.00 -6.56 1.38 H 194 12.83 34.61 5 4958.000 53.29 PK 74.00 -20.71 1.19 H 22 11.49 41.79 6 4958.000 44.18 AV 54.00 -9.82 1.19 H 22 2.38 41.79 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2479.000 90.06 PK 114.00 -23.94 1.43 V 12 55.46 34.60 2 *2479.000 76.90 AV 94.00 -17.10 1.43 V 12 42.30 34.60 3 2483.500 64.72 PK 74.00 -9.28 1.43 V 12 30.11 34.61 4 2483.500 47.47 AV 54.00 -6.53 1.43 V 12 12.86 34.61 5 4958.000 49.17 PK 74.00 -24.83 1.08 V 294 7.37 41.79 6 4958.000 39.02 AV 54.00 -14.98 1.08 V 294 -2.78 41.79 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF960503A01A 27 Report Format Version 2.0.5 Reference No.: 960503A01

4.3 FREQUENCY TOLERANCE MEASUREMENT 4.3.1 LIMITS OF FREQUENCY TOLERANCE MEASUREMENT Limit : ±0.001% 4.3.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SPECTRUM ANALYZER FSP 40 100036 Mar. 13, 2008 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.3.3 TEST PROCEDURE The frequency tolerance of the carrier signal shall be maintained within ±0.001% of the operating frequency over a temperature variation of –20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 EUT OPERATING CONDITION Same as Item 4.2.6 Report No.: RF960503A01A 28 Report Format Version 2.0.5 Reference No.: 960503A01

4.3.6 TEST RESULTS TEST MODE A MODULATION TYPE GFSK CHANNEL 0, 38, 77 INPUT POWER ENVIRONMENTAL 25deg. C, 75%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 1001hPa TESTED BY Jun Wu CH 0 Carrier Frequency Frequency Frequency TEST CONDITION (MHz) Drift (kHz) error (%) Tnom(℃) 20 Vnom(V) 120 2401.9865 0 0 Vmin(V) 102 2401.9746 -11.9 -0.0004954 Tmin(℃) -20 Vmax(V) 138 2401.9752 -11.3 -0.0004704 Vmin(V) 102 2401.9770 -9.5 -0.0003955 Tmax(℃) 50 Vmax(V) 138 2401.9768 -9.7 -0.0004038 Limit : ±0.001% CH 38 Carrier Frequency Frequency Frequency TEST CONDITION (MHz) Drift (kHz) error (%) Tnom(℃) 20 Vnom(V) 120 2439.9862 0 0 Vmin(V) 102 2439.9748 -11.4 -0.0004672 Tmin(℃) -20 Vmax(V) 138 2439.9752 -11.0 -0.0004508 Vmin(V) 102 2439.9986 12.4 -0.0005082 Tmax(℃) 50 Vmax(V) 138 2439.9984 12.2 -0.0005000 Limit : ±0.001% CH 77 Carrier Frequency Frequency Frequency TEST CONDITION (MHz) Drift (kHz) error (%) Tnom(℃) 20 Vnom(V) 120 2478.9859 0 0 Vmin(V) 102 2478.9844 -1.5 -0.0000605 Tmin(℃) -20 Vmax(V) 138 2478.9852 -0.7 -0.0000282 Vmin(V) 102 2478.9847 -1.2 -0.0000484 Tmax(℃) 50 Vmax(V) 138 2478.9856 -0.3 -0.0000121 Limit : ±0.001% Report No.: RF960503A01A 29 Report Format Version 2.0.5 Reference No.: 960503A01

4.4 BAND EDGES MEASUREMENT 4.4.1 LIMITS OF BAND EDGES MEASUREMENT Below –50dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.4.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SPECTRUM ANALYZER FSP 40 100036 Mar. 13, 2008 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.4.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set both RBW and VBW of spectrum analyzer to 100 kHz and 100 kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. The spectrum plots are attached on the following pages. 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 EUT OPERATING CONDITION Same as Item 4.2.6 4.4.6 TEST RESULTS The spectrum plots are attached on the following 4 images. D1 line indicates the highest level, and D2 line indicates the 50dB offset below D1. It shows compliance with the requirement in part 15.249(d). Report No.: RF960503A01A 30 Report Format Version 2.0.5 Reference No.: 960503A01

Report No.: RF960503A01A 31 Report Format Version 2.0.5 Reference No.: 960503A01

Report No.: RF960503A01A 32 Report Format Version 2.0.5 Reference No.: 960503A01

5. INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, UL, A2LA Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. CNLA, BSMI, NCC Netherlands Telefication Singapore PSB, GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also Report No.: RF960503A01A 33 Report Format Version 2.0.5 Reference No.: 960503A01

APPENDIX-A MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. Report No.: RF960503A01A A-1 Report Format Version 2.0.5 Reference No.: 960503A01


Document Created: 2007-05-30 16:39:56
Document Modified: 2007-05-30 16:39:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC