Test Report

FCC ID: C3K1119

Test Report

Download: PDF
FCCID_764825

FCC TEST REPORT REPORT NO.: RF960123A04B MODEL NO.: 1119 RECEIVED: Jan. 18, 2007 TESTED: Jan. 18 ~ 26, 2007 ISSUED: Feb. 5, 2007 APPLICANT: MICROSOFT CORPORATION ADDRESS: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. This test report consists of 34 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF960123A04B 1 Report Format Version 2.0.5 Reference No.: 960123A04

Table of Contents 1. CERTIFICATION..........................................................................................3 2. SUMMARY OF TEST RESULTS..................................................................4 2.1 MEASUREMENT UNCERTAINTY...............................................................4 3. GENERAL INFORMATION ..........................................................................5 3.1 GENERAL DESCRIPTION OF EUT............................................................5 3.2 DESCRIPTION OF TEST MODES..............................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .........................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: .............7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................8 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................8 4. TEST TYPES AND RESULTS......................................................................9 4.1 CONDUCTED EMISSION MEASUREMENT ..............................................9 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................9 4.1.2 TEST INSTRUMENTS ................................................................................9 4.1.3 TEST PROCEDURES ...............................................................................10 4.1.4 DEVIATION FROM TEST STANDARD .....................................................10 4.1.5 TEST SETUP ...........................................................................................10 4.1.6 EUT OPERATING CONDITIONS ..............................................................11 4.1.7 TEST RESULTS ........................................................................................12 4.2 RADIATED EMISSION MEASUREMENT .................................................18 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................18 4.2.2 TEST INSTRUMENTS ..............................................................................19 4.2.3 TEST PROCEDURES ...............................................................................20 4.2.4 DEVIATION FROM TEST STANDARD .....................................................20 4.2.5 TEST SETUP ...........................................................................................21 4.2.6 EUT OPERATING CONDITIONS ..............................................................21 4.2.7 TEST RESULTS ........................................................................................22 4.3 FREQUENCY TOLERANCE MEASUREMENT ........................................28 4.3.1 LIMITS OF FREQUENCY TOLERANCE MEASUREMENT ......................28 4.3.2 TEST INSTRUMENTS ..............................................................................28 4.3.3 TEST PROCEDURE .................................................................................28 4.3.4 DEVIATION FROM TEST STANDARD .....................................................28 4.3.5 EUT OPERATING CONDITION ................................................................28 4.3.6 TEST RESULTS ........................................................................................29 4.4 BAND EDGES MEASUREMENT ..............................................................30 4.4.1 LIMITS OF BAND EDGES MEASUREMENT............................................30 4.4.2 TEST INSTRUMENTS ..............................................................................30 4.4.3 TEST PROCEDURE .................................................................................30 4.4.4 DEVIATION FROM TEST STANDARD .....................................................30 4.4.5 EUT OPERATING CONDITION ................................................................30 4.4.6 TEST RESULTS ........................................................................................30 5. INFORMATION ON THE TESTING LABORATORIES ...............................33 APPENDIX-A ....................................................................................................... A-1 Report No.: RF960123A04B 2 Report Format Version 2.0.5 Reference No.: 960123A04

1. CERTIFICATION PRODUCT: Wireless Dongle BRAND NAME: Microsoft® MODEL NO.: 1119 APPLICANT: MICROSOFT CORPORATION TESTED: Jan. 18 ~ 26, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249), ANSI C63.4-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Feb. 5, 2007 ( Annie Chang ) TECHNICAL ACCEPTANCE : , DATE: Feb. 5, 2007 Responsible for RF ( Jamison Chan ) APPROVED BY : , DATE: Feb. 5, 2007 ( Ken Liu / Deputy Manager ) Report No.: RF960123A04B 3 Report Format Version 2.0.5 Reference No.: 960123A04

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD PARAGRAPH TEST TYPE RESULT REMARK h Minimum passing margin is 15.207 Conducted Emission Test PASS —16.910B at 3.708MHz Radiated Emission Test Band Edge Measurement 15.209 Limit: 500B less than the ni ; in i 15.249 peak value of fundamental PASS E";”Z”é‘é‘g‘afa;fégggg,afi'zn i6 15.249 (d) frequency or meet radiated ' ' emission limit in section 12.209 15.249 (b)(2) Frequency Tolerance pass Meet the requirement of Limit: £0.001% limit. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Uncertainty Conducted emissions 2.44 dB Radiated emissions 3.55 dB Report No.: RI60123A048 Report Format Version 2.0.5 Reference No.: 960123404

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Wireless Dongle MODEL NO. 1119 FCC ID C3K1119 POWER SUPPLY 5Vdc from host equipment MODULATION TYPE GFSK FREQUENCY RANGE 2402MHz ~2479MHz NUMBER OF CHANNEL 78 ANTENNA TYPE Strip antenna with 1.88dBi gain DATA CABLE N/A I/O PORTS USB port ASSOCIATED DEVICES N/A NOTE: 1. The EUT is a Wireless Dongle, which includes transmitter & receiver function. 2. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF960123A04B 5 Report Format Version 2.0.5 Reference No.: 960123A04

3.2 DESCRIPTION OF TEST MODES Seventy-eight channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHZ) (MHz) (MHz) (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2431 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 19 2421 39 2441 59 2461 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Powered from host equipment) (AC adapter) Modem Printer Notebook Test Table Report No.: RF960123A04B 6 Report Format Version 2.0.5 Reference No.: 960123A04

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: EUT Applicable to configure Description mode PLC RE<1G RE³1G APCM A - √ - - Serial No.: 629_9BE_001 B - √ - - Serial No.: 629_9BE_002 C √ √ √ √ Serial No.: 629_9BE_003 Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHz RE³1G: Radiated Emission above 1GHz APCM: Antenna Port Conducted Measurement POWER LINE CONDUCTED EMISSION TEST: Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE C 0 to 77 0, 38, 77 DSSS GFSK RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT RADIO AVAILABLE TESTED MODULATION CONFIGURE CHANNEL CHANNEL TECHNOLOGY TYPE MODE A 0 to 77 0 DSSS GFSK B 0 to 77 0 DSSS GFSK C 0 to 77 0 DSSS GFSK RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE C 0 to 77 0, 38, 77 DSSS GFSK FREQUENCY TOLERANCE:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE C 0 to 77 0, 38, 77 DSSS GFSK Report No.: RF960123A04B 7 Report Format Version 2.0.5 Reference No.: 960123A04

BANDEDGE MEASUREMENT:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED RADIO MODULATION CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE C 0 to 77 0, 77 DSSS GFSK 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C. (15.249) ANSI C63.4-2003 All test items have been performed and recorded as per the above standards. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID CN-0G5152-486 1 NOTEBOOK DELL D600 FCC DoC Approved 43-487-0213 2 PRINTER EPSON LQ-300+ DCGY017054 FCC DoC Approved 3 MODEM ACEEX 1414 980020520 IFAXDM1414 NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 N/A 1.8m braid shielded wire, terminated with DB25 and Centronics connector via metallic 2 frame, w/o core 1.2 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame, 3 w/o core. NOTE: All power cords of the above support units are non-shielded (1.8m). Report No.: RF960123A04B 8 Report Format Version 2.0.5 Reference No.: 960123A04

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL ROHDE & SCHWARZ Test ESCS 30 838251/021 Nov. 23, 2007 Receiver ROHDE & SCHWARZ Artificial ESH3-Z5 100218 Nov. 21, 2007 Mains Network (for EUT) LISN With Adapter (for EUT) AD10 C10Ada-001 Nov. 21, 2007 ROHDE & SCHWARZ Artificial ESH3-Z5 100219 Nov. 07, 2007 Mains Network (for peripherals) ROHDE & SCHWARZ Artificial ESH3-Z5 100220 Oct. 26, 2007 Mains Network (for peripherals) Software ADT_Cond_V7.3.2 NA NA Software ADT_ISN_V7.3.2 NA NA RF cable (JYEBAO) 5D-FB Cable-C10.01 Mar. 30, 2007 SUHNER Terminator (For ROHDE 65BNC-5001 E1-010773 Feb. 23, 2007 & SCHWARZ LISN) NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in ADT Shielded Room No. 10. 3. The VCCI Site Registration No. C-1852. Report No.: RF960123A04B 9 Report Format Version 2.0.5 Reference No.: 960123A04

y anr corn 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under Limit — 20dB was not recorded. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. 4.1.5 TEST SETUP Vertical Ground Reference Plane /Test Receiver C__—4I 0 o c o EUT M o 0 o o || 80cm || Ne L | L1 N T Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. 2.Both of LISNs (AMN) are 80 cm from EUT and at least 80 from other units and other m etal planes For the actual test configuration, please refer to the related item — Photographs of the Test Configuration. Report No.: REI60123A048 10 Report Format Version 2.0.5 Reference No.: 960123404

4.1.6 EUT OPERATING CONDITIONS a. Connected the EUT to a notebook placed on a testing table. b. The notebook ran a test program (provided by manufacturer) to enable EUT under transmission/receiving condition continuously at specific channel frequency. c. The notebook sent "H" messages to its screen. d. The notebook sent messages to printer and the printer prints them out e. The notebook sent messages to modem. f. Repeated c ~ f. Report No.: RF960123A04B 11 Report Format Version 2.0.5 Reference No.: 960123A04

4.1.7 TEST RESULTS CONDUCTED WORST CASE DATA TEST MODE C MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 21deg. C, 53%RH, PHASE Line 1 CONDITIONS 1008hPa TESTED BY Jun Wu Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.177 0.20 46.68 - 46.88 - 64.61 54.61 -17.73 - 2 0.240 0.20 41.06 - 41.26 - 62.10 52.10 -20.84 - 3 3.708 0.39 38.70 - 39.09 - 56.00 46.00 -16.91 - 4 3.952 0.40 37.13 - 37.53 - 56.00 46.00 -18.47 - 5 6.223 0.51 31.32 - 31.83 - 60.00 50.00 -28.17 - 6 20.938 1.46 27.95 - 29.41 - 60.00 50.00 -30.59 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960123A04B 12 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 21deg. C, 53%RH, PHASE Line 2 CONDITIONS 1008hPa TESTED BY Jamison Chan Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.180 0.20 46.68 - 46.88 - 64.50 54.50 -17.62 - 2 0.298 0.20 39.87 - 40.07 - 60.29 50.29 -20.22 - 3 3.410 0.27 38.15 - 38.42 - 56.00 46.00 -17.58 - 4 3.652 0.28 35.65 - 35.93 - 56.00 46.00 -20.07 - 5 6.340 0.38 30.85 - 31.23 - 60.00 50.00 -28.77 - 6 19.027 0.94 26.05 - 26.99 - 60.00 50.00 -33.01 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960123A04B 13 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 21deg. C, 53%RH, PHASE Line 1 CONDITIONS 1008hPa TESTED BY Jun Wu Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.177 0.20 45.32 - 45.52 - 64.61 54.61 -19.09 - 2 0.240 0.20 41.14 - 41.34 - 62.10 52.10 -20.76 - 3 3.590 0.38 38.54 - 38.92 - 56.00 46.00 -17.08 - 4 4.250 0.41 35.74 - 36.15 - 56.00 46.00 -19.85 - 5 6.105 0.51 30.83 - 31.34 - 60.00 50.00 -28.66 - 6 20.539 1.43 27.02 - 28.45 - 60.00 50.00 -31.55 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960123A04B 14 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 21deg. C, 53%RH, PHASE Line 2 CONDITIONS 1008hPa TESTED BY Jamison Chan Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.176 0.20 42.54 - 42.74 - 64.70 54.70 -21.96 - 2 0.297 0.20 39.07 - 39.27 - 60.33 50.33 -21.06 - 3 3.410 0.27 38.11 - 38.38 - 56.00 46.00 -17.62 - 4 3.650 0.28 35.75 - 36.03 - 56.00 46.00 -19.97 - 5 6.284 0.38 32.58 - 32.96 - 60.00 50.00 -27.04 - 6 19.151 0.95 26.73 - 27.68 - 60.00 50.00 -32.32 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960123A04B 15 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 21deg. C, 53%RH, PHASE Line 1 CONDITIONS 1008hPa TESTED BY Jun Wu Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.179 0.20 46.00 - 46.20 - 64.55 54.55 -18.35 - 2 0.239 0.20 41.28 - 41.48 - 62.12 52.12 -20.64 - 3 3.591 0.38 37.48 - 37.86 - 56.00 46.00 -18.14 - 4 4.070 0.40 38.38 - 38.78 - 56.00 46.00 -17.22 - 5 6.221 0.51 30.91 - 31.42 - 60.00 50.00 -28.58 - 6 20.539 1.43 27.10 - 28.53 - 60.00 50.00 -31.47 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960123A04B 16 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz (SYSTEM) ENVIRONMENTAL 21deg. C, 53%RH, PHASE Line 2 CONDITIONS 1008hPa TESTED BY Jamison Chan Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.181 0.20 45.57 - 45.77 - 64.43 54.43 -18.66 - 2 0.298 0.20 39.79 - 39.99 - 60.29 50.29 -20.30 - 3 3.414 0.27 36.80 - 37.07 - 56.00 46.00 -18.93 - 4 3.828 0.29 36.94 - 37.23 - 56.00 46.00 -18.77 - 5 6.223 0.37 32.66 - 33.03 - 60.00 50.00 -26.97 - 6 18.375 0.90 28.59 - 29.49 - 60.00 50.00 -30.51 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960123A04B 17 Report Format Version 2.0.5 Reference No.: 960123A04

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF960123A04B 18 Report Format Version 2.0.5 Reference No.: 960123A04

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL HP Preamplifier 8447D 2432A03504 May 21, 2007 HP Preamplifier 8449B 3008A01924 Sep. 05, 2007 HP Preamplifier 8449B 3008A01638 Sep. 17, 2007 ROHDE & SCHWARZ TEST ESI7 836697/012 Oct. 24, 2007 RECEIVER Schwarzbeck Antenna VULB 9168 137 Feb. 21, 2007 Schwarzbeck Antenna VHBA 9123 480 Mar. 30, 2007 EMCO Horn Antenna 3115 6714 Oct. 24, 2007 EMCO Horn Antenna 3115 9312-4192 Mar. 14, 2007 ADT. Turn Table TT100 0306 NA ADT. Tower AT100 0306 NA ADT_Radiated_V Software NA NA 7.6.011 SUHNER RF cable SF104-26.5 CABLE-CH6-17m-01 Dec. 11, 2007 ROHDE & SCHWARZ FSP 40 100036 Mar. 16. 2007 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in ADT Chamber No. 6. 4. The Industry Canada Reference No. IC 3789-6. Report No.: RF960123A04B 19 Report Format Version 2.0.5 Reference No.: 960123A04

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi- anechoic. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak method or average method as specified and then reported in data sheet. NOTE: 1. The resolution bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF960123A04B 20 Report Format Version 2.0.5 Reference No.: 960123A04

4.2.5 TEST SETUP Ant. Tower 1-4m Variable 3m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF960123A04B 21 Report Format Version 2.0.5 Reference No.: 960123A04

4.2.7 TEST RESULTS RADIATED WORST CASE DATA: BELOW 1GHz TEST MODE A MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE Below 1000MHz (SYSTEM) ENVIRONMENTAL 20deg. C, 68%RH, DETECTOR Quasi-Peak CONDITIONS 1008Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 109.70 31.10 QP 43.50 -12.40 1.47 H 289 20.94 10.16 2 129.14 27.56 QP 43.50 -15.94 1.39 H 259 15.38 12.18 3 498.48 30.82 QP 46.00 -15.18 1.29 H 214 8.98 21.84 4 733.69 31.71 QP 46.00 -14.29 1.17 H 139 4.61 27.10 5 797.84 30.11 QP 46.00 -15.89 1.62 H 277 2.08 28.03 6 863.93 34.01 QP 46.00 -11.99 1.12 H 223 5.25 28.76 7 931.96 35.50 QP 46.00 -10.50 1.06 H 16 5.23 30.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 64.99 28.27 QP 40.00 -11.73 1.00 V 154 15.06 13.21 2 129.14 33.52 QP 43.50 -9.98 1.12 V 145 21.34 12.18 3 465.43 30.94 QP 46.00 -15.06 1.00 V 256 10.41 20.53 4 665.65 32.87 QP 46.00 -13.13 1.09 V 28 7.75 25.12 5 733.69 34.40 QP 46.00 -11.60 1.29 V 10 7.30 27.10 6 861.98 36.23 QP 46.00 -9.77 1.35 V 358 7.51 28.72 7 933.91 35.64 QP 46.00 -10.36 1.30 V 319 5.33 30.31 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960123A04B 22 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE B MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE Below 1000MHz (SYSTEM) ENVIRONMENTAL 20deg. C, 68%RH, DETECTOR Quasi-Peak CONDITIONS 1008Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.00 28.18 QP 40.00 -11.82 1.48 H 181 15.67 12.51 2 109.70 29.59 QP 43.50 -13.91 1.39 H 268 19.43 10.16 3 372.12 30.63 QP 46.00 -15.37 1.56 H 46 12.72 17.91 4 397.39 31.82 QP 46.00 -14.18 1.37 H 106 13.09 18.73 5 733.69 33.01 QP 46.00 -12.99 1.18 H 133 5.91 27.10 6 865.87 35.85 QP 46.00 -10.15 1.20 H 274 7.05 28.80 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 125.25 35.25 QP 43.50 -8.25 1.00 V 211 23.59 11.66 2 626.77 30.02 QP 46.00 -15.98 1.32 V 190 5.40 24.62 3 731.74 34.11 QP 46.00 -11.89 1.28 V 7 7.10 27.01 4 863.93 35.88 QP 46.00 -10.12 1.42 V 25 7.12 28.76 5 933.91 36.53 QP 46.00 -9.47 1.65 V 262 6.22 30.31 6 939.74 31.35 QP 46.00 -14.65 1.41 V 226 0.90 30.45 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960123A04B 23 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE Below 1000MHz (SYSTEM) ENVIRONMENTAL 20deg. C, 68%RH, DETECTOR Quasi-Peak CONDITIONS 1008Pa FUNCTION TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 111.64 29.07 QP 43.50 -14.43 1.64 H 292 18.76 10.31 2 265.21 35.30 QP 46.00 -10.70 1.52 H 88 21.11 14.19 3 399.34 30.47 QP 46.00 -15.53 1.38 H 256 11.68 18.79 4 731.74 34.05 QP 46.00 -11.95 1.33 H 127 7.04 27.01 5 825.05 30.24 QP 46.00 -15.76 1.07 H 82 1.99 28.25 6 861.98 36.22 QP 46.00 -9.78 1.16 H 295 7.50 28.72 7 931.96 34.99 QP 46.00 -11.01 1.09 H 352 4.72 30.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 33.89 28.30 QP 40.00 -11.70 1.02 V 352 15.19 13.11 2 66.93 28.60 QP 40.00 -11.40 1.00 V 187 15.62 12.98 3 121.36 34.47 QP 43.50 -9.03 1.00 V 181 23.33 11.14 4 129.14 32.18 QP 43.50 -11.32 1.17 V 178 20.00 12.18 5 731.74 33.51 QP 46.00 -12.49 1.39 V 22 6.50 27.01 6 799.78 30.92 QP 46.00 -15.08 1.42 V 133 2.88 28.04 7 865.87 35.22 QP 46.00 -10.78 1.35 V 340 6.42 28.80 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960123A04B 24 Report Format Version 2.0.5 Reference No.: 960123A04

RADIATED WORST CASE DATA: ABOVE 1GHz TEST MODE C MODULATION TYPE GFSK CHANNEL 0 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 1 ~ 25GHz (SYSTEM) ENVIRONMENTAL 20deg. C, 68%RH, DETECTOR Peak(PK) CONDITIONS 1008Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 57.83 PK 74.00 -16.17 1.00 H 112 23.13 34.70 2 2390.00 45.78 AV 54.00 -8.22 1.00 H 112 11.08 34.70 3 *2402.00 91.85 PK 114.00 -22.15 1.00 H 112 57.13 34.72 4 *2402.00 70.95 AV 94.00 -23.05 1.00 H 112 36.23 34.72 5 4804.00 58.61 PK 74.00 -15.39 1.14 H 193 16.91 41.69 6 4804.00 37.71 AV 54.00 -16.29 1.14 H 193 -3.99 41.69 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 58.47 PK 74.00 -15.53 1.00 V 183 23.77 34.70 2 2390.00 45.69 AV 54.00 -8.31 1.00 V 183 10.99 34.70 3 *2402.00 92.14 PK 114.00 -21.86 1.00 V 183 57.42 34.72 4 *2402.00 72.24 AV 94.00 -21.76 1.00 V 183 37.52 34.72 5 4804.00 55.68 PK 74.00 -18.32 1.47 V 178 13.98 41.69 6 4804.00 34.87 AV 54.00 -19.13 1.47 V 178 -6.83 41.69 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF960123A04B 25 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 38 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 1 ~ 25GHz (SYSTEM) ENVIRONMENTAL 20deg. C, 68%RH, DETECTOR Peak(PK) CONDITIONS 1008Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 90.96 PK 114.00 -23.04 1.00 H 113 56.15 34.81 2 *2440.00 70.06 AV 94.00 -23.94 1.00 H 113 35.25 34.81 3 4880.00 58.96 PK 74.00 -15.04 1.00 H 191 17.07 41.89 4 4880.00 38.06 AV 54.00 -15.94 1.00 H 191 -3.83 41.89 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 92.13 PK 114.00 -21.87 1.21 V 161 57.32 34.81 2 *2440.00 71.23 AV 94.00 -22.77 1.21 V 161 36.42 34.81 3 4880.00 55.66 PK 74.00 -18.34 1.18 V 200 13.77 41.89 4 4880.00 34.76 AV 54.00 -19.24 1.18 V 200 -7.13 41.89 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF960123A04B 26 Report Format Version 2.0.5 Reference No.: 960123A04

TEST MODE C MODULATION TYPE GFSK CHANNEL 77 INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 1 ~ 25GHz (SYSTEM) ENVIRONMENTAL 20deg. C, 68%RH, DETECTOR Peak(PK) CONDITIONS 1008Pa FUNCTION Average (AV) TESTED BY Jun Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2479.00 91.41 PK 114.00 -22.59 1.00 H 113 56.52 34.89 2 *2479.00 70.51 AV 94.00 -23.49 1.00 H 113 35.62 34.89 3 2483.50 59.15 PK 74.00 -14.85 1.00 H 113 24.25 34.90 4 2483.50 46.70 AV 54.00 -7.30 1.00 H 113 11.80 34.90 5 4958.00 57.75 PK 74.00 -16.25 1.07 H 196 15.65 42.09 6 4958.00 36.85 AV 54.00 -17.15 1.07 H 196 -5.25 42.09 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2479.00 92.94 PK 114.00 -21.06 1.15 V 189 58.05 34.89 2 *2479.00 72.04 AV 94.00 -21.96 1.15 V 189 37.15 34.89 3 2483.50 58.04 PK 74.00 -15.96 1.15 V 189 23.14 34.90 4 2483.50 46.72 AV 54.00 -7.28 1.15 V 189 11.82 34.90 5 4958.00 55.09 PK 74.00 -18.91 1.15 V 202 12.99 42.09 6 4958.00 34.19 AV 54.00 -19.81 1.15 V 202 -7.91 42.09 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF960123A04B 27 Report Format Version 2.0.5 Reference No.: 960123A04

4.3 FREQUENCY TOLERANCE MEASUREMENT 4.3.1 LIMITS OF FREQUENCY TOLERANCE MEASUREMENT Limit : ±0.001% 4.3.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SPECTRUM ANALYZER FSP 40 100036 Mar. 16. 2007 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.3.3 TEST PROCEDURE The frequency tolerance of the carrier signal shall be maintained within ±0.001% of the operating frequency over a temperature variation of –20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 EUT OPERATING CONDITION Same as Item 4.2.6 Report No.: RF960123A04B 28 Report Format Version 2.0.5 Reference No.: 960123A04

4.3.6 TEST RESULTS TEST MODE C MODULATION TYPE GFSK CHANNEL 0, 38, 77 INPUT POWER ENVIRONMENTAL 17deg. C, T5%RH, (SYSTEM) 120Vvac, 60 Hz CONDITIONS 1010hPa TESTED BY Jun Wu CH 0 TEST CONDITION Carrier Frequency Frequency Frequency (MHz) Drift (kHz) error (%) Tnom(C) 20 Vnom(V) 120 2402.0334 0 0 u2. Vmin(V) 108 2402.0262 —7.2 —0.000300 Tmin(‘C) —20 Vmax(V) 132 2402.0267 —6.7 —0.000279 . Vmin(V) 108 2402.0321 —1.3 —0.0000541 Tmax(‘C) 50 Vmax(V) 132 2402.0324 —1.0 —0.0000416 Limit : £0.001% CH 38 TEST CONDITION Carrier Frequency Frequency Frequency (MHz) Drift (kHz) error (%) Tnom(C) 20 Vnom(V) 120 2440.0341 0 0 . Vmin(V) 108 2440.0264 —7.7 —0.000316 Tmin(‘C) —20 Vmax(V) 132 2440.0271 —7.0 —0.000287 Vmin(V) 108 2440.0320 —2.1 —0.0000861 Tmax(‘C) 50 Vmax(V) 132 2440.0325 —1.6 —0.0000656 Limit : £0.001% CH 77 TEST CONDITION Carrier Frequency Frequency Frequency (MHz) Drift (kHz) error (%) Tnom(C) 20 Vnom(V) 120 2479.0344 0 0 . Vmin(V) 108 2479.0272 —7.2 —0.000290 Tmin(‘C) —20 Vmax(V) 132 2479.0270 —6.5 —0.000262 Vmin(V) 108 2479.0332 —1.2 —0.0000484 Tmax(‘C) 50 Vmax(V) 132 2479.0338 —0.6 —0.0000242 Limit : £0.001% Report No.: RI60123A048 20 Report Format Version 2.0.5 Reference No.: 960123404

4.4 BAND EDGES MEASUREMENT 4.4.1 LIMITS OF BAND EDGES MEASUREMENT Below –50dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.4.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SPECTRUM ANALYZER FSP 40 100036 Mar. 16. 2007 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.4.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set both RBW and VBW of spectrum analyzer to 100 kHz and 100 kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. The spectrum plots are attached on the following pages. 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 EUT OPERATING CONDITION Same as Item 4.2.6 4.4.6 TEST RESULTS The spectrum plots are attached on the following 4 images. D1 line indicates the highest level, and D2 line indicates the 50dB offset below D1. It shows compliance with the requirement in part 15.249(d). Report No.: RF960123A04B 30 Report Format Version 2.0.5 Reference No.: 960123A04

Report No.: RF960123A04B 31 Report Format Version 2.0.5 Reference No.: 960123A04

Report No.: RF960123A04B 32 Report Format Version 2.0.5 Reference No.: 960123A04

5. INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, UL, A2LA Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. CNLA, BSMI, NCC Netherlands Telefication Singapore PSB, GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also Report No.: RF960123A04B 33 Report Format Version 2.0.5 Reference No.: 960123A04

APPENDIX-A MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. Report No.: RF960123A04B A-1 Report Format Version 2.0.5 Reference No.: 960123A04


Document Created: 2007-03-03 15:54:21
Document Modified: 2007-03-03 15:54:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC