Test Report

FCC ID: C3K1014

Test Report

Download: PDF
FCCID_339216

FCC ID: C3K1014 FCC TEST REPORT REPORT NO.: RF920529R02 MODEL NO.: 1014 RECEIVED: May. 28, 2003 TESTED: May. 30, 2003 APPLICANT: MICROSOFT CORPORATION ADDRESS: ONE MICROSOFT WAY, REDMOND, WA 98052-6399, U.S.A. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: 47 14th Lin, Chia Pau Tsuen, Linkou Hsiang, Taipei, Taiwan, R.O.C. This test report consists of 19 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by NVLAP or any U.S. government agencies. The test results in the report only apply to the tested sample. Lab Code: 200102-0 0528 ILAC MRA Report No.: RF920529R02 1 Issued: June 24, 2003

FCC ID: C3K1014 Table of Contents 1 CERTIFICATION..............................................................................................3 2 SUMMARY OF TEST RESULTS .....................................................................4 3 GENERAL INFORMATION..............................................................................5 3.1 GENERAL DESCRIPTION OF EUT ................................................................5 3.2 DESCRIPTION OF TEST MODES ..................................................................6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................6 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................7 4 TEST PROCEDURE AND RESULT ................................................................8 4.1 CONDUCTED EMISSION MEASUREMENT...................................................8 4.2 RADIATED EMISSION MEASUREMENT........................................................8 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .....................................8 4.2.2 TEST INSTRUMENT .......................................................................................9 4.2.3 TEST PROCEDURE......................................................................................10 4.2.4 TEST SETUP................................................................................................. 11 4.2.5 EUT OPERATING CONDITION..................................................................... 11 4.2.6 TEST RESULT...............................................................................................12 5 PHOTOGRAPHS OF THE TEST CONFIGURATION ....................................18 6 INFORMATION ON THE TESTING LABORATORIES ..................................19 Report No.: RF920529R02 2 Issued: June 24, 2003

FCC ID: C3K1014 1 CERTIFICATION PRODUCT : Wireless Keyboard BRAND NAME : Microsoft® MODEL NO : 1014 APPLICANT : MICROSOFT CORPORATION STANDARDS : 47 CFR Part 15, Subpart C(15.227), RSS-210 ANSI C63.4-1992 We, Advance Data Technology Corporation, hereby certify that one sample of the designation has been tested in our facility on May. 30, 2003. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's EMC characteristics under the conditions herein specified. Report No.: RF920529R02 3 Issued: June 24, 2003

FCC ID: C3K1014 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: 47 CFR Part 15, Subpart C, RSS-210 STANDARD TEST TYPE RESULT REMARK PARAGRAPH 15.207 Conducted Emission Test N/A 3VDC from batteries Meet the requirement of limit Minimum passing 15.227 Radiated Emission Test PASS margin is –22.0dBuV/m at 163.66MHz NOTE: The receiver part to communicate with the EUT has been verified to comply with FCC Part 15, Subpart B, Class B (DoC). The test report can be provided upon request. Report No.: RF920529R02 4 Issued: June 24, 2003

FCC ID: C3K1014 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Wireless Keyboard MODEL NO. 1014 POWER SUPPLY 3VDC from battery MODULATION TYPE FSK CARRIER FREQUENCY 27.195 OF EACH CHANNEL BANDWIDTH OF EACH NA CHANNEL NUMBER OF CHANNEL 1 ANTENNA TYPE Wire Antenna DATA CABLE NA I/O PORTS NA ASSOCIATED DEVICES NA NOTE: 1.The EUT is the transmitter part of Wireless Keyboard. 2.Three samples were provided to this test: Transmitter Receiver Mouse S/N. EVT 55 S/N. EVT 46 Serial No S/N. EVT 59 S/N. EVT 13 372 S/N. EVT 13 S/N. EVT 59 3.Three identical transmitters and three identical receivers were provided to test at Micorsoft’s request. 4.For more detailed feature description of the EUT, please refer to user’s manual. Report No.: RF920529R02 5 Issued: June 24, 2003

FCC ID: C3K1014 3.2 DESCRIPTION OF TEST MODES One channel was provided to this EUT. Channel Frequency 1 27.195 MHz 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is the transmitter part of a Wireless Keyboard. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC 47 CFR Part 15, Subpart C (15.227), RSS-210 ANSI C63.4-1992 All tests have been performed and recorded as per the above standards. Report No.: RF920529R02 6 Issued: June 24, 2003

FCC ID: C3K 1014 Py ADT CORP. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 ggfi/liafiélli HP DTPC 27 SG21103587 FCC DoC Approve 2 MC(:)?\ILI'(I')gr ADI CM100 02605183— 1\02006 DoC 3 PRINTER EPSON LQ—300+ DCGYO17096 |FCC DoC Approved 4 MODEM ACEEX 1414 980020569 IFAXDM1414 5 Receiver Microsoft 1015 NA Doc NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 1.8 m braid shielded wire, terminated with VGA connector via metallic frame, w/io core 3 1.2m braid shielded wire, terminated with DB25 and Centronics connector via metallic frame, w/o core 4 1.2 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame, wio core. 5 1.9 m braid shielded wire, terminated with USB connector via metallic frame, w/o core. NOTE: All power cords of the above support units are non shielded (1.8m). Report No.: RF920529R02 Issued: June 24, 2003

FCC ID: C3K1014 4 TEST PROCEDURE AND RESULT 4.1 CONDUCTED EMISSION MEASUREMENT NA 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT According to 15.227 the field strength of emissions from intentional radiators operated under these frequencies bands shall not exceed the following: Fundamental Frequency Field Strength of Fundamental (dBuV/m) (MHz) Peak Average 26.96-27.28 100 80 Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF920529R02 8 Issued: June 24, 2003

FCC ID: C3K1014 4.2.2 TEST INSTRUMENT DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED UNTIL * HP Spectrum Analyzer 8590L 3544A01176 June.10, 2004 Spectrum Analyzer 8593E 3926A04191 Mar. 24, 2004 * HP Preamplifier 8447D 2944A08485 May. 01, 2004 * HP Preamplifier 8449B 3008A01201 Dec. 01, 2003 * HP Preamplifier 8449B 3008A01292 Aug. 07, 2003 *Spectrum Analyzer 8593E 3926A04191 Mar. 24, 2004 *Test Receiver ESI7 838496/016 Feb. 23, 2004 SCHAFFNER Tunable VHBA 9123 459 Dipole Antenna Nov. 22, 2003 SCHWARZBECK Tunable UHA 9105 977 Dipole Antenna *ANTENNA (Large Biconical) VHBA9123 449 Dec. 22, 2003 * CHASE BILOG Antenna CBL6112A 2221 Aug. 02, 2003 * SCHWARZBECK Horn BBHA9120-D1 D130 Jul. 03, 2003 Antenna * EMCO Horn Antenna 3115 9312-4192 Mar. 23. 2004 * EMCO Turn Table 1060 1115 NA * SHOSHIN Tower AP-4701 A6Y005 NA ADT_Radiated * Software NA NA _V5.09 * ANRITSU RF Switches MP59B M35046 Jul. 11, 2003 * TIMES RF cable LMR-600 CABLE-ST5-01 Jul. 11, 2003 NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. “*” = These equipment are used for the final measurement. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The test was performed in ADT Open Site No. 5. 5. The VCCI Site Registration No. is R-1039. Report No.: RF920529R02 9 Issued: June 24, 2003

FCC ID: C3K1014 4.2.3 TEST PROCEDURE a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10 meter open area test site. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10 dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10 dB margin would be re- tested one by one using the quasi-peak method or average method as specified and then reported in Data sheet peak mode and QP mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Peak detection (PK) and Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 300 Hz for Average detection (AV) at frequency above 1GHz. Report No.: RF920529R02 10 Issued: June 24, 2003

FCC ID: C3K1014 4.2.4 TEST SETUP For the actual test configuration, please refer to the related item in this test report - Photographs of the Test Configuration. 4.2.5 EUT OPERATING CONDITION Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF920529R02 11 Issued: June 24, 2003

FCC ID: C3K1014 4.2.6 TEST RESULT EUT Wireless Keyboard MODEL NO. 1014 FREQUENCY DETECTOR RANGE Below 1000 MHz FUNCTION Peak/Average/Quasi-Peak INPUT SERIAL NO. S/N. EVT 55 3VDC POWER ENVIRONMENTAL 25deg. C, 60%RH, TESTED BY Gary Chang CONDITIONS 991 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *27.18 50.6 PK 100.00 -49.40 2.49 H 226 44.00 6.60 2 *27.19 39.1 AV 80.00 -40.90 2.49 H 226 32.50 6.60 3 108.78 13.1 QP 43.50 -30.40 1.00 H 46 0.40 12.70 4 135.98 11.2 QP 43.50 -32.40 1.00 H 65 -1.30 12.40 5 163.17 8.70 QP 43.50 -34.80 1.00 H 99 -2.10 10.80 6 190.37 12.9 QP 43.50 -30.60 1.00 H 122 2.20 10.80 7 217.56 10.8 QP 46.00 -35.20 1.00 H 144 -1.80 12.60 8 244.76 12.9 QP 46.00 -33.10 1.00 H 183 -2.20 15.10 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. ”∗”= Fundamental frequency. Report No.: RF920529R02 12 Issued: June 24, 2003

FCC ID: C3K1014 EUT Wireless Keyboard MODEL NO. 1014 FREQUENCY DETECTOR RANGE Below 1000 MHz FUNCTION Peak/Average/Quasi-Peak INPUT SERIAL NO. S/N. EVT 55 3VDC POWER ENVIRONMENTAL 25deg. C, 60%RH, TESTED BY Gary Chang CONDITIONS 991 hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *27.19 31.2 AV 80.00 -48.80 1.00 V 58 24.60 6.60 2 *27.20 45.5 PK 100.00 -54.50 1.00 V 58 38.90 6.60 3 108.78 21.0 QP 43.50 -22.50 1.00 V 239 8.30 12.70 4 136.44 19.9 QP 43.50 -23.60 1.00 V 223 7.60 12.40 5 162.81 18.4 QP 43.50 -25.10 1.00 V 201 7.60 10.80 6 190.74 18.2 QP 43.50 -25.30 1.00 V 176 7.40 10.80 7 217.26 18.6 QP 46.00 -27.40 1.00 V 141 6.00 12.60 8 244.74 19.4 QP 46.00 -26.60 1.00 V 109 4.30 15.10 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. ”∗”= Fundamental frequency. Report No.: RF920529R02 13 Issued: June 24, 2003

FCC ID: C3K1014 EUT Wireless Keyboard MODEL NO. 1014 FREQUENCY DETECTOR RANGE Below 1000 MHz FUNCTION Peak/Average/Quasi-Peak INPUT SERIAL NO. S/N. EVT 59 3VDC POWER ENVIRONMENTAL 25deg. C, 60%RH, TESTED BY Gary Chang CONDITIONS 991 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *27.19 49.5 PK 100.00 -50.50 2.01 H 206 42.90 6.60 2 *27.19 41.6 AV 80.00 -38.40 2.00 H 206 35.00 6.60 3 108.78 14.7 QP 43.50 -28.80 1.00 H 212 2.00 12.70 4 135.98 17.0 QP 43.50 -26.50 1.00 H 212 4.60 12.40 5 162.78 17.1 QP 43.50 -26.40 1.00 H 212 6.30 10.80 6 190.85 19.4 QP 43.50 -24.10 1.00 H 212 8.60 10.80 7 217.09 19.7 QP 46.00 -26.30 1.00 H 212 7.20 12.50 8 245.19 18.4 QP 46.00 -27.60 1.00 H 212 3.20 15.10 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. ”∗”= Fundamental frequency. Report No.: RF920529R02 14 Issued: June 24, 2003

FCC ID: C3K1014 EUT Wireless Keyboard MODEL NO. 1014 FREQUENCY DETECTOR RANGE Below 1000 MHz FUNCTION Peak/Average/Quasi-Peak INPUT SERIAL NO. S/N. EVT 59 3VDC POWER ENVIRONMENTAL 25deg. C, 60%RH, TESTED BY Gary Chang CONDITIONS 991 hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *27.19 41.4 PK 100.00 -58.60 1.54 V 42 34.80 6.60 2 *27.19 31.6 AV 80.00 -48.40 1.54 V 42 25.00 6.60 3 108.80 19.7 QP 43.50 -23.80 1.00 V 189 7.00 12.70 4 136.00 20.7 QP 43.50 -22.80 1.00 V 167 8.30 12.40 5 163.61 19.6 QP 43.50 -23.90 1.00 V 136 8.80 10.80 6 190.76 19.5 QP 43.50 -24.00 1.00 V 108 8.70 10.80 7 217.22 18.8 QP 46.00 -27.20 1.00 V 86 6.30 12.60 8 244.98 19.0 QP 46.00 -27.00 1.00 V 65 3.90 15.10 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. ”∗”= Fundamental frequency. Report No.: RF920529R02 15 Issued: June 24, 2003

FCC ID: C3K1014 EUT Wireless Keyboard MODEL NO. 1014 FREQUENCY DETECTOR RANGE Below 1000 MHz FUNCTION Peak/Average/Quasi-Peak INPUT SERIAL NO. S/N. EVT 13 3VDC POWER ENVIRONMENTAL 25deg. C, 60%RH, TESTED BY Gary Chang CONDITIONS 991 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *27.19 49.8 PK 100.00 -50.20 1.89 H 33 43.20 6.60 2 *27.19 38.8 AV 80.00 -41.20 1.88 H 33 32.20 6.60 3 109.11 17.9 QP 43.50 -25.60 1.14 H 186 5.20 12.70 4 135.74 21.0 QP 43.50 -22.50 1.00 H 151 8.60 12.40 5 190.82 21.2 QP 43.50 -22.30 1.00 H 92 10.40 10.80 6 299.60 19.4 QP 46.00 -26.60 1.00 H 57 2.60 16.80 7 353.99 19.4 QP 46.00 -26.60 1.00 H 84 1.60 17.80 8 435.57 20.8 QP 46.00 -25.20 1.00 H 109 1.20 19.60 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. ”∗”= Fundamental frequency. Report No.: RF920529R02 16 Issued: June 24, 2003

FCC ID: C3K1014 EUT Wireless Keyboard MODEL NO. 1014 FREQUENCY DETECTOR RANGE Below 1000 MHz FUNCTION Peak/Average/Quasi-Peak INPUT SERIAL NO. S/N. EVT 13 3VDC POWER ENVIRONMENTAL 25deg. C, 60%RH, TESTED BY Gary Chang CONDITIONS 991 hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *27.19 43.0 PK 100.00 -57.00 1.00 V 124 36.40 6.60 2 *27.19 33.6 AV 80.00 -46.40 1.00 V 33 27.00 6.60 3 108.78 20.7 QP 43.50 -22.80 1.00 V 172 8.00 12.70 4 135.97 16.3 QP 43.50 -27.20 1.00 V 154 3.90 12.40 5 163.66 21.5 QP 43.50 -22.00 1.00 V 103 10.70 10.80 6 190.86 15.6 QP 43.50 -27.90 1.00 V 78 4.80 10.80 7 217.27 20.5 QP 46.00 -25.50 1.00 V 49 7.90 12.60 8 245.07 17.5 QP 46.00 -28.50 1.00 V 39 2.40 15.10 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. ”∗”= Fundamental frequency. Report No.: RF920529R02 17 Issued: June 24, 2003

FCC ID: C3K1014 5 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST Report No.: RF920529R02 18 Issued: June 24, 2003

FCC ID: C3K1014 6 INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025, Guide 25 or EN 45001: USA FCC, NVLAP Germany TUV Rheinland Japan VCCI New Zealand MoC Norway NEMKO R.O.C. BSMI, DGT, CNLA Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Lin Kou EMC Lab: Hsin Chu EMC Lab: Tel: 886-2-26052180 Tel: 886-35-935343 Fax: 886-2-26052943 Fax: 886-35-935342 Lin Kou Safety Lab: Lin Kou RF&Telecom Lab: Tel: 886-2-26093195 Tel: 886-3-3270910 Fax: 886-2-26093184 Fax: 886-3-3270892 Email: service@mail.adt.com.tw Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF920529R02 19 Issued: June 24, 2003


Document Created: 2003-06-26 19:24:34
Document Modified: 2003-06-26 19:24:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC