FCC Single Modular approval Declaration letter

FCC ID: BRWWACO1T

Cover Letter(s)

Download: PDF
FCCID_4300347

HORIZSN h c s s « Single Modular Approval Declaration Letter We, Horizon Hobby,LLG apply single modular approval for Product Name: Waco RF Module Modek Waco recio: erwwacort According to 996369 001 Module Equip Auth Guide vO1r04 and 15.212 requirement: 1) The radio elements must have the radio frequeney circuitry shielded. Physical components and tuning capacitor(s) may be located extemal to the shield, but must be on the module assembly; Answers Yesy both sites are shtded 2) The modile must have buffered modulationdaa inpurs to ensure that the device will comply with Par 15 requirements with any type of ipusignal; Answers.Yes Allinputsto the modites arebuflred through ogks or miroprocessor nputs 3)The modiartransiter must have ts own power supply regulation Answers. Yes A low drop out regulatoris used for molarpower supoly regulaton 4) The moddule must contain a permanendy attached antenra, ocontain urique artenna conneetsr,and be matketed and operated only with specific anterna(s)per Sections 15203, 152040) 15 2046), 15.2120),2.9200) Answers Yes, Device is equlpped with Integral Selder 1/4 Wave Antenna. (5) The module must demonstrate compliance in stand—alone configuration; Answers Yesy This modile was teoted at/esot1Ocm disnce between modulr andAEs; plesse refeto testsetup photo (6) The module must be abelled with is pecmanerely afixed FCC ID label, ouse an electronic display (See KDB Publication 784748 aboutlabelling equirements}; Answers.Yes, the modilis permanently etched wi the FOC ID on the module And requrementstatement() was Isted in the Users Manual Hst e ces wlb fabeled to dlaplay e FC ID oftte module: Contains FOC D: ERWWACOTT (7) The module must comply with all specificrulesapplieablet the tansmiterincluding all the condtions provided in the integration instructions by the grantee; nomzon reanc ue 210Researh Rond,Camosgn, t sezusn

HORIZ H _G~ B B «< _— Answer: Yes, the module complies with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Refer to test report and user manual. (8) The module must comply with RF exposure requirements Answer: Yes, transmitter meets MPE calculation of 47 CFR 1.1307 . Refer to MPE Reports and modular installation manual. Signature BP Name: Christopher Dickerson Title: President and EVP of Product Management and Marketing Applicant Company: Horizon Hobby, LLC HORIZON HOBBY, LLC 2904 Research Road, Champaign, IL 61822 USA


Document Created: 2019-05-30 17:37:57
Document Modified: 2019-05-30 17:37:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC