user manual

FCC ID: BRWSTX3

Users Manual

Download: PDF
FCCID_4219754

EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support tab for this product. Meaning of Special Language The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product: WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with Incompatible components or augment product in any way without the approval of Horizon Hobby, LLC This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology. Age Recommendation: Not for Children under 14 years. This is not a toy. NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. WARRANTY REGISTRATION Visit www.spektrumrc.com/registration today to register your product. SAFETY PRECAUTIONS • Always ensure all batteries have been properly charged prior to using the model. • Always check all servos and their connections prior to each run. • Never operate your model near spectators, parking areas or any other area that could result in injury to people or damage of property. • Never operate your model during adverse weather conditions. Poor visibility can cause disorientation and loss of control of your model. • Never point the transmitter antenna directly toward the model. The radiation pattern from the tip of the antenna is inherently low. • If at any time during the operation of your model you observe any erratic or abnormal operation, immediately stop operation of your model until the cause of the problem has been ascertained and corrected. STX3 USER GUIDE 1

EN INSTALLING THE TRANSMITTER BATTERIES This transmitter requires 4 AA batteries. 1. Remove the battery cover from the transmitter. 2. Install the batteries as shown. 3. Install the battery cover. CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to national regulations. TRANSMITTER FUNCTIONS A. Servo Reversing To reverse the Throttle (TH) or Steering (ST) channel, switch the position of the correlating switch—“N” is for normal, “R” A is for reverse. B. Throttle Trim B C Adjusts the throttle neutral point D E C. Steering Trim Adjusts the steering center point. Normally, the steering trim is F adjusted until the vehicle tracks straight. G D. THROTTLE RATE H Adjusts the end point of the throttle E. STEERING RATE Adjusts the end point of the steering F. Indicator Lights • Solid red lights: Indicates radio connectivity and I adequate battery power • Flashing red lights: Indicates the battery voltage is L critically low. Replace batteries G. Throttle Limit K Limits throttle output to 50/75/100% J Select 50% or 75% for less experienced drivers or when you are driving the vehicle in a small area. H. Antenna I. Power Button J. Throttle/Brake K. Steering Wheel L. Channel 3 Buttons SRX300 RECEIVER 2.4GHZ DIGITAL RADIO SYSTEM Specifications Type: FHSS 2.4GHz protocol Dimensions (LxWxH): 35.8 x 23.6 x 14.3 mm) Antenna Length: 8.27 in Channels: 3 Weight: 8.8g Band: 2.4GHz Voltage Range: 3.5–9.6V 2 STX3 USER GUIDE

EN BINDING Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. The STX3 transmitter and SPMSRX300 receiver are bound at the factory. If you need to rebind, follow the instructions below. 1. Insert the Bind Plug in the BIND port on the receiver. 2. Connect a fully charged battery pack to the ESC. 3. Power on the ESC. The red LED flashes, indicating the receiver is in bind mode. 4. Center the ST TRIM and TH TRIM dials on the transmitter. 5. Turn the steering wheel to Full Right. Power the transmitter on while holding the steering wheel to the Right. 6. Release the steering wheel when the receiver LED stops flashing. 7. Remove the Bind Plug, then power off the receiver to save the s ettings. 8. Power off the transmitter. 9. Remove the bind plug and store it in a convenient place. You must rebind when: • Different failsafe positions are desired e.g., when throttle or steering reversing has been changed. • Binding the receiver to a different transmitter. MULTIFUNCTION PROGRAMMING 3rd Channel Programming (Default is 2 Position) • Use CH3 push buttons to adjust CH3 accessory/servo to 2 Position desired 2nd position. Turn steering wheel clockwise to • Press and hold the top button, power ON transmitter. Continue confirm position 2. The LED will flash two times to confirm to hold until LED flashes 5 times. Release top button position 2 has been saved. • Use CH3 top/bottom button to adjust accessory/servo • Use CH3 push buttons to adjust CH3 accessory/servo to 1st position. Turn steering wheel clockwise (right) to to desired 3rd position. Turn steering wheel clockwise confirm position 1. The LED will flash one time to confirm to confirm position 3. The LED will flash three times to position 1 has been saved. confirm position 3 has been saved. • Use CH3 push buttons to adjust CH3 accessory/servo to • Use CH3 push buttons to adjust CH3 accessory/servo desired 2nd position. Turn steering wheel clockwise to to desired 4th position. Turn steering wheel clockwise to confirm position 2. The LED will flash two times to confirm confirm position 4. The LED will flash four times to confirm position 2 has been saved. position 4 has been saved. • Turn off transmitter to save settings • Turn off transmitter to save settings 3 Position Proportional • Press and hold the top button, power ON transmitter. Continue • Press and hold the top button, power ON transmitter. Continue to hold until LED flashes 5 times. Release top button to hold until LED flashes 5 times. Release top button • Use CH3 top/bottom button to adjust accessory/servo • Use CH3 top/bottom button to adjust accessory/servo to 1st position. Turn steering wheel clockwise (right) to to 1st position. Turn steering wheel clockwise (right) to confirm position 1. The LED will flash one time to confirm confirm position 1. The LED will flash one time to confirm position 1 has been saved. position 1 has been saved. • Use CH3 push buttons to adjust CH3 accessory/servo to • Use CH3 top/bottom button to select desired end point and desired 2nd position. Turn steering wheel clockwise to turn the steering wheel clockwise (right) four times. The LED confirm position 2. The LED will flash two times to confirm will flash five times to confirm the position has been saved. position 2 has been saved. • Turn off transmitter to save settings. • Use CH3 push buttons to adjust CH3 accessory/servo Notes: to desired 3rd position. Turn steering wheel clockwise • Press and hold the CH3 push buttons to adjust rapidly. to confirm position 3. The LED will flash three times to Press and release will make smaller adjustments confirm position 3 has been saved. • 1st selected position and last selected position will always • Turn off transmitter to save settings be the maximum end point for CH3 adjustment. 4 Position • Moving the steering wheel during adjustment of CH3 will • Press and hold the top button, power ON transmitter. Continue save the position. Do not move steering wheel unless to hold until LED flashes 5 times. Release top button position is ready to be set. • Use CH3 top/bottom button to adjust accessory/servo to 1st position. Turn steering wheel clockwise (right) to confirm position 1. The LED will flash one time to confirm position 1 has been saved. STX3 USER GUIDE 3

EN WATER-RESISTANT COMPONENT Your new SRX300 Receiver has a special water-resistant In case of excess exposure to water or debris, immediately coating on the electronics to ensure reliable performance in wipe down the SRX200 with a soft cloth, and allow it to fully higher than average moisture conditions. This conformal coating dry before next use. can offer mild protection from light drops of water. NOTICE: Never use a pressure washer to clean your vehicle. • DO NOT submerge this product under water for any period of time. If it is submerged, it may result in damage or loss of NOTICE: Make sure the other components in your vehicle function. are waterproof or water-resistant before driving in wet • DO NOT pour water onto or allow excess water to come in conditions. direct contact with the product. • DO NOT operate this product in heavy rain or snow. • DO NOT expose this product to salt water (ocean water or water on salt-covered roads), contaminated or polluted water. 2.4GHz TROUBLESHOOTING GUIDE Problem Possible Cause Solution Your transmitter and receiver are too close Move transmitter 1 to 3 meters from receiver together You are around metal objects Move to an area with less metal The system will not connect Check model selected and ensure you are bound to The model selected is not the model bound to that model Your transmitter was accidentally put into bind Rebind your transmitter and receiver mode and is no longer bound to your receiver The receiver goes into Replace the receiver or contact Horizon Product failsafe mode a short Check the receiver antenna to be sure it is not cut Support distance away from the or damaged Make sure your receiver antenna is in an antenna transmitter tube and is above the vehicle Charge batteries. Spektrum receivers require at least 3.5V to operate. An inadequate power supply can The receiver quits Inadequate battery voltage allow voltage to momentarily drop below 3.5V and responding during cause the receiver to brown out and reconnect operation Loose or damaged wires or connectors between Check the wires and connection between the battery battery and receiver and receiver. Repair or replace wires and/or connectors 1 YEAR LIMITED WARRANTY What this Warranty Covers Purchaser’s Remedy Horizon Hobby, LLC, (Horizon) warrants to the original purchaser Horizon’s sole obligation and purchaser’s sole and exclusive that the product purchased (the “Product”) will be free from remedy shall be that Horizon will, at its option, either (i) defects in materials and workmanship for a period of 1 year service, or (ii) replace, any Product determined by Horizon from the date of purchase. to be defective. Horizon reserves the right to inspect any What is Not Covered and all Product(s) involved in a warranty claim. Service or This warranty is not transferable and does not cover (i) cosmetic replacement decisions are at the sole discretion of Horizon. damage, (ii) damage due to acts of God, accident, misuse, Proof of purchase is required for all warranty claims. SERVICE abuse, negligence, commercial use, or due to improper use, OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS installation, operation or maintenance, (iii) modification of or to THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. any part of the Product, (iv) attempted service by anyone other Limitation of Liability than a Horizon Hobby authorized service center, (v) Product not HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, purchased from an authorized Horizon dealer, (vi) Product not INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF compliant with applicable technical regulations, or (vii) use that PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY violates any applicable laws, rules, or regulations. WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY MAKES NO OTHER WARRANTY OR REPRESENTATION, AND OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES Further, in no event shall the liability of Horizon exceed the OF NON-INFRINGEMENT, MERCHANTABILITY AND individual price of the Product on which liability is asserted. FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER As Horizon has no control over use, setup, final assembly, ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT modification or misuse, no liability shall be assumed nor THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF accepted for any resulting damage or injury. By the act of use, THE PURCHASER’S INTENDED USE. setup or assembly, the user accepts all resulting liability. If you 4 STX3 USER GUIDE

EN as the purchaser or user are not prepared to accept the liability hours. When sending product into Horizon, please include your associated with the use of the Product, purchaser is advised to RMA number, a list of the included items, and a brief summary return the Product immediately in new and unused condition to of the problem. A copy of your original sales receipt must the place of purchase. be included for warranty consideration. Be sure your name, Law address, and RMA number are clearly written on the outside These terms are governed by Illinois law (without regard to of the shipping carton. conflict of law principals). This warranty gives you specific legal NOTICE: Do not ship LiPo batteries to Horizon. If you have rights, and you may also have other rights which vary from any issue with a LiPo battery, please contact the appropriate state to state. Horizon reserves the right to change or modify Horizon Product Support office. this warranty at any time without notice. WARRANTY SERVICES Warranty Requirements Questions, Assistance, and Services For Warranty consideration, you must include your original Your local hobby store and/or place of purchase cannot provide sales receipt verifying the proof-of-purchase date. Provided warranty support or service. Once assembly, setup or use of warranty conditions have been met, your Product will be the Product has been started, you must contact your local serviced or replaced free of charge. Service or replacement distributor or Horizon directly. This will enable Horizon to better decisions are at the sole discretion of Horizon. answer your questions and service you in the event that you Non-Warranty Service may need any assistance. Should your service not be covered by warranty, service will be For questions or assistance, please visit our website at www. completed and payment will be required without notification horizonhobby.com, submit a Product Support Inquiry, or call or estimate of the expense unless the expense exceeds the toll free telephone number referenced in the Warranty and 50% of the retail purchase cost. By submitting the item for Service Contact Information section to speak with a Product service you are agreeing to payment of the service without Support representative. notification. Service estimates are available upon request. You Inspection or Services must include this request with your item submitted for service. If this Product needs to be inspected or serviced and is Non-warranty service estimates will be billed a minimum of ½ compliant in the country you live and use the Product in, hour of labor. In addition you will be billed for return freight. please use the Horizon Online Service Request submission Horizon accepts money orders and cashier’s checks, as well process found on our website or call Horizon to obtain a Return as Visa, MasterCard, American Express, and Discover cards. Merchandise Authorization (RMA) number. Pack the Product By submitting any item to Horizon for service, you are agreeing securely using a shipping carton. Please note that original boxes to Horizon’s Terms and Conditions found on our website may be included, but are not designed to withstand the rigors http://www.horizonhobby.com/content/_service-center_ of shipping without additional protection. Ship via a carrier that render-service-center. provides tracking and insurance for lost or damaged parcels, ATTENTION: Horizon service is limited to Product as Horizon is not responsible for merchandise until it arrives compliant in the country of use and ownership. If and is accepted at our facility. An Online Service Request is received, a non-compliant Product will not be serviced. available at http://www.horizonhobby.com/content/_service- Further, the sender will be responsible for arranging return center_render-service-center. If you do not have internet shipment of the un-serviced Product, through a carrier of access, please contact Horizon Product Support to obtain the sender’s choice and at the sender’s expense. Horizon a RMA number along with instructions for submitting your will hold non-compliant Product for a period of 60 days from product for service. When calling Horizon, you will be asked notification, after which it will be discarded. to provide your complete name, street address, email address and phone number where you can be reached during business 10/2015 WARRANTY, SERVICE AND CUSTOMER SERVICE CONTACT INFORMATION Country of Horizon Hobby Phone Number/Email Address Address Purchase Horizon Service Center servicecenter.horizonhobby.com/ (Repairs and Repair Requests) RequestForm/ Horizon Product Support productsupport@horizonhobby.com 2904 Research Rd North America (Product Technical Assistance) 877-504-0233 Champaign, Illinois, 61822 USA websales@horizonhobby.com Sales 800-338-4639 Horizon Technischer Service service@horizonhobby.eu Hanskampring 9 European Union Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100 D 22885 Barsbüttel, Germany STX3 USER GUIDE 5

EN FCC INFORMATION BRWSTX3 FCC NOTE: This device complies with Part 15 of the FCC However, there is no guarantee that interference will not Rules. Operation is subject to the following two conditions: occur in a particular installation. If this equipment does cause (1) this device may not cause harmful interference, and (2) harmful interference to radio or television reception, which this device must accept any interference received, including can be determined by turning the equipment off and on, interference that may cause undesired operation. the user is encouraged to try to correct the interference by NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY one or more of the following measures: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED • Reorient or relocate the receiving antenna. BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH • Increase the separation between the equipment and MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO receiver. OPERATE THE EQUIPMENT. • Connect the equipment into an outlet on a circuit different For a Class B digital device or peripheral, the instructions from that to which the receiver is connected. furnished the user shall include the following or similar • Consult the dealer or an experienced radio/TV technician statement, placed in a prominent location in the text of the for help. manual: The device has been evaluated to meet general RF exposure NOTE: This equipment has been tested and found to comply environment. with the limits for a Class B digital device, pursuant to part To maintain compliance with FCC’s RF exposure guidelines, 15 of the FCC Rules. the distance must be at least 20cm between the radiator These limits are designed to provide reasonable protection and your body, and fully supported by the operating and against harmful interference in a residential installation. installation configurations of the transmitter and its antenna(s) This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. IC INFORMATION 6157A-STX3 This device complies with Industry Canada license-exempt (1) this device may not cause interference, and (2) this device RSS standard(s). Operation is subject to the following two must accept any interference, including interference that may conditions: cause undesired operation of the device. COMPLIANCE INFORMATION FOR THE EUROPEAN UNION Horizon Hobby, LLC hereby declares that this product Instructions for Disposal of WEEE by is in compliance with the essential requirements and other relevant provisions of the Red Directive. Users in the European Union A copy of the EU Declaration of Conformity is available online at: This product must not be disposed of with other waste. http://www.horizonhobby.com/content/support-render- Instead, it is the user’s responsibility to dispose of their compliance. waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. 6 STX3 USER GUIDE

INFORMATIONS DE IC 6157A-STX3 IC: CAN ICES-3 (B)/NMB-3(B) Le présent appareil (1) l’appareil ne doit pas produire de brouillage, et (2) est conforme aux CNR d’Industrie Canada applicables l’utilisateur de l’appareil doit accepter tout brouillage aux appareils radio exempts de licence. L’exploitation est radioélectrique subi, même si le brouillage est susceptible autorisée aux deux conditions suivantes : d’en compromettre le fonctionnement. INFORMATIONS DE CONFORMITÉ POUR L’UNION EUROPÉENNE Déclaration de conformité de l’union Instructions relatives à l’élimination des D3E pour européenne : Horizon Hobby, LLC déclare par la les utilisateurs résidant dans l’Union européenne présente que ce produit est en conformité avec les exigences Ce produit ne doit pas être éliminé avec les ordures essentielles et les autres dispositions de la directive RED. ménagères. Il est de la responsabilité de l‘utilisateur de Une copie de la déclaration de conformité européenne est remettre le produit à un point de collecte officiel des disponible à : déchets d’équipements électriques. Cette procédure permet http://www.horizonhobby.com/content/support-render- de garantir le respect de l’environnement et l’absence compliance. de sollicitation excessive des ressources naturelles. Elle protège de plus le bien-être de la communauté humaine. Pour plus d’informations quant aux lieux d’éliminations des French compliance déchets d‘équipements électriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures info for proof only ménagères.

Caution: Note : Cet appareil est conforme à la Partie 15 des règlements de la FCC et aux normes RSS de l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer un fonctionnement indésirable. Le fabricant n'est pas responsable des toutes interférences radio ou télévision causées par des modifications non autorisées apportées à cet appareil. De telles modifications peuvent empêcher l’utilisateur d’utiliser l'appareil. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie II) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Antenna Type Max. Antenna Gain(dBi) internal permanent antenna 0 This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver.

‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.


Document Created: 2019-03-29 09:34:55
Document Modified: 2019-03-29 09:34:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC