Cover Letter Requesting Modular Approval

FCC ID: BRWKATY1T

Cover Letter(s)

Download: PDF
FCCID_4445849

Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: Horizon Hobby, LLC FCC ID: BRWKATYIT Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 DO1 ‘Module Certification Guide vO1ir04‘_BRWKATY1T has been examined against the followmg requirements. Essential Elements of 15.212(a)(1 The radio elements must have the radio frequency The RF portions of the module circuitry shielded. Physical components and are completely contained within a metal shielding can. The module tuning capacitor(s) may be located external to the does not depend on any other shield, but must be on the module assembly shielding. The module must have buffered modulation/data All data communication with the inputs to ensure that the device will comply with module is digital. A microprocessor then converts the Part 15 requirements with any type of input signal digital information into the analog RF signal. The module must contain power supply regulation The module has on—board on the module voltage regulation which allows it to accept input power between 3.7—volts and 10—volts DC. The module must contain a permanently attached The module and antenna design antenna, or contain a unique antenna connector, is not user serviceable. It utilizes non—standard micro—coaxial and be marketed and operated only with specific connectors and antennas with antenna(s), per Sections 15.203, 15.204(b), approximate gain of 2.0 dBi. 15.204(c), 15.212(a), 2.929(b) The module must demonstrate compliance in a The module was tested in a stand—alone configuration stand—alone configuration. The module must be labelled with its permanently The FCC ID label format is affixed FCC ID label, or use an electronic display included in the filing. The product will always be inside another (See KDB Publication 784748 about labelling enclosure during actual use. A requirements) label will be placed on the outside of the product if the FCC ID is not visible The module must comply with all specific rules The operation description and applicable to the transmitter including all the user guides provide this detail. conditions provided in the integration instructions by the grantee The module must comply with RF exposure The transmitter meets requirements requirements. HORIZON HOBBY, LLC 2904 Research Road, Champaign, IL 61822 USA

HORIZS—N— Sincerely, Name: Christopher Dickerson Title: President and Executive Vice President Product Management and signature: CS Marketing HORIZON HOBBY, LLC 2904 Research Road, Champaign, IL 61822 USA


Document Created: 2019-09-04 15:34:28
Document Modified: 2019-09-04 15:34:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC