Limited Modular Approval request

FCC ID: BRWHBZCHAMP2S

Cover Letter(s)

Download: PDF
FCCID_3023390

 Federal Communications Commission
 Equipment Authorization Branch
 7435 Oakland Mills Road
 Columbia, MD 21046
 Company name: Horizon Hobby, LLC
 FCC ID: BRWHBZCHAMP2S


 Gentlemen,

 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 DO1 ‘Module
 Certification Guide v01r04‘_BRWHBZCHAMP2S has been examined against the
following requirements.

Essential Elements of 15.212(a)(1)                                   Yes                     No
The radio elements must have the radio frequency      The RF circuitry is not shielded;     x
circuitry shielded. Physical components and           therefore, we are seeking limited
tuning capacitor(s) may be located external to the    modular approval.
shield, but must be on the module assembly
The module must have buffered modulation/data         All data communication with the
inputs to ensure that the device will comply with     L“S?d”'g":Ss‘fégrfiz'a:}l;%é?”sm'mng
Part 15 requirements with any type of input signal       ng                    |
The module must contain power supply regulation       The module transmitter has its
on the module                                         own power supply regulation (DC
                                                      3.3V).
The module must contain a permanently attached        The module complies with
antenna, or contain a unique antenna connector,       antenna requirements. It is
                                       &          a   marketed and operated with a
and be marketed and operated only with specific       permanently attached, specific
antenna(s), per Sections 15.203, 15.204(b),           antenna.
15.204(c), 15.212(a), 2.929(b)
The module must demonstrate compliance in a           The module was tested in a
stand—alone configuration                             stand—alone configuration.
The module must be labelled with its permanently      The module is labeled with the
affixed FCC ID label, or use an electronic display    CC D.
(See KDB Publication 784748 about labelling
requirements)
The module must comply with all specific rules        The operation description and
applicable to the transmitter including all the       user guides provide this detail.
conditions provided in the integration instructions
by the grantee
The module must comply with RF exposure               The module is exempt due to its
requirements                                          low field strength.

Sincerely,

Name: William Vallee
Title: Executive Vice Presidgnt Global Operations
Signature: h/                   VM

                               HORIZON HOBBY, LLC
                    4105 Fieldstone Road, Champaign, IL 61822 USA



Document Created: 2016-05-06 08:33:33
Document Modified: 2016-05-06 08:33:33

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC