User Manual

FCC ID: BRWDASRX20

Users Manual

Download: PDF
FCCID_2432691

                     X1ANT 2.4GHz DSMX Module User Manual.

                                                                   Horizon Hobby Inc.,
                                                                    4105 Fieldstone Rd
                                                                  Champaign, IL 61822
                                                                        (408) 203 4408
1. Features

      2.4GHz Direct Sequence Spread Spectrum (DSSS) radio transceiver module.
      Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band
      Fully integrated power regulation with a wide input unregulated operating range
       2.7V to 3.6V.
      Fully integrated local oscillator and 12MHz 20ppm reference crystal
      50mA operating current
      Transmit power 1mW EIRP
      Receive sensitivity up to -95dBm
      DSSS data rates up to 250kbps
      1 mile operating range
      Full packet assembling and disassembling
      Auto transaction sequencer
      Fully buffered digital interface with high voltage tolerant inputs

2. Pin description

              Pin Number     Name           Description
              J1             P1.4           Wireless Trainer RX
              J3             XOUT           Clock Output
              J4             P1.4           Wireless Trainer RX
              J5             P1.1           Wireless Trainer SCLK
              J6             XRES           Radio reset input
              J7             P1.0           Wireless Trainer SDATA
              J8             VDD            Module DC incoming power
              J9             GND            Module DC GND
              J11            VDD            Module DC incoming power
              J12            GND            Module DC GND


3. Specifications

      Parameter                   Value        Units
      Storage Temp                -65 to 105   Degrees Celsius
      VDD                         2.7 to 3.6   Volts
      Receive Sensitivity         -95          dBm
      Transmit power (radiated)   0            dBm MAX
      Idle current                1            mA
      Receive current             22           mA
      Transmit current            50           mA

4. Block Diagram


5. Module User Requirements

5.1 This module must be integrated into a device where the user cannot access the
antenna connector.

5.2 Only a 1.5dBi antenna can be used with this module. The antenna must meet and not
exceed the gain and pattern of the supplied folded dipole antenna.

5.3 The device must contain the following permanent labeling on the exterior of the
device as follows:

Contains FCC ID: BRWDASRX20

5.4 The user manual of the device must contain the following paragraph:

FCC Information

    This equipment has been tested and found to comply with the limits for Part 15 of
    the FCC rules. These limits are designed to provide reasonable protection against
    harmful interference in a residential installation. This equipment generates, uses
    and can radiate radio frequency energy and, if not installed and used in accordance
    with the instructions, may cause harmful interference to radio communications.

    However, there is no guarantee that interference will not occur in a particular
    installation. If this equipment does cause harmful interference to radio or television
    reception, which can be determined by turning the equipment off and on, the user is
    encouraged to try to correct the interference by one or more of the following
    measures:

•      Reorient or relocate the receiving antenna.

•      Increase the separation between the equipment and receiver.

•      Connect the equipment to an outlet on a circuit different from that to which the
       receiver is connected.

    This device complies with part 15 of the FCC rules. Operation is subject to the
    following two conditions: (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that
    may cause undesired operation.

    Note: Modifications to this product will void the user’s authority to operate this equipment.

IC Information

    This device complies with Industry Canada licence-exempt RSS standard(s).


      Operation is subject to the following two conditions: (1) this device may not cause
      interference, and (2) this device must accept any interference, including interference
      that may cause undesired operation of the device."

      Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
      appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
      suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
      l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
      susceptible d'en compromettre le fonctionnement.

      Remarque: Toute modification de ce produit annule l'autorité de l'utilisateur à
      utiliser cet équipement.




CE Information



This product contains a radio transmitter with wireless technology

which has been tested and found to be compliant with the applicable

regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz

frequency range.

The following countries associated regulatory agencies recognizing the

noted certifications for this product as authorized for sale and use are:

 UK               DE        DK         NO        SE
 FI               EE        LV         LT        PL
 CZ               SK        HU         RO        SI
 AT               IT        ES         PT        IE
 NL               LU        MT         CY        GR



Caution:

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.



Document Created: 2014-10-29 15:42:15
Document Modified: 2014-10-29 15:42:15

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC