RF Exposure Info

FCC ID: BRWDAMTX11

RF Exposure Info

Download: PDF
FCCID_1166226

August 5, 2009 RF Exposure Calculations per FCC KDB 447498 v3r3 FCC ID: BRWDAMTX11 Granted Frequency Range: 2402-2476 MHz Granted Power = 0.302 W = 24.8 dBm (average conducted power) Duty Cycle = 36.9% (see Theory of Operation) Source Based Power = 0.111W (20.4 dBm) Power and threshold calculations for hand-held / portable use: The device exceeds the general SAR exclusion threshold of 60/f, therefore the determination for SAR testing is based on the following two thresholds: ƒ KDB 447498 section (4)(c)(iii)(1) requires Hand SAR for hand-held devices with the hand operating closer than 5 cm from the antenna during normal use if the power exceeds 1000·[f(GHz)]-0.5 mW. ƒ KDB 447498 section (4)(c)(iii)(3) requires body SAR for hand-held devices that may be used closer than 5cm to the body if the power exceeds 300·[f(GHz)]-0.5 mW. Using the lower threshold of 300·[f(GHz)]-0.5 mW: SAR requirement threshold = 300 x (2.478) -0.5 mW = 190.6 mW = 22.8 dBm As the output power is below the of 300·[f(GHz)]-0.5 mW threshold called out in KDB 447498, the product does not require Body- or Hand-SAR evaluation for handheld usage. The user manual shall require an rf exposure warning requiring 5cm separation from the body. Additionally the applicant is providing the verbiage to be used on the manuals for such controllers. MPE calculation for Mobile Use: Power density (S) = (Power x Gain)/(4*PI*d2) Using the source based power of 20.4 dBm (worst case duty cycle) and antenna gain of 2dBi… S (mW/cm2) at 20cm = 0.035 mW/cm2 MPE limit = 1.0 mW/cm2 The device complies with the RF exposure requirements for body exposure at a separation distance of 20cm. Page 1 of 1


Document Created: 2009-08-07 16:32:35
Document Modified: 2009-08-07 16:32:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC