MPE Test Report

FCC ID: BRWAR20300T

RF Exposure Info

Download: PDF
FCCID_3585590

FCC ID:BRWAR20300T IC:6157A-AR20300T RADIO FREQUENCY EXPOSURE LIMIT Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See §15.247(b)(4) and §1.1307(b)(1) of this chapter. EUT Specification EUT AR20300T 20Ch PowerSafe Receiver Model SPMAR20300T, SPMAR20310T Frequency Band (Operating) 2404.0 MHz ~2476.0 MHz □ Portable (<20cm separation) Device Category ■ Mobile (>20cm separation) □ Others □ Occupational/Controlled exposure (S = 5mW/cm2) Exposure Classification ■ General Population/Uncontrolled exposure (S=1mW/cm2) ■ Single antenna □ Multiple antennas Antenna Diversity □ Tx diversity □ Rx diversity □ Tx/Rx diversity Max. Output Power 19.52dBm Antenna Gain (Max) 2.0dBi (Numeric gain:1.58) ■ MPE Evaluation Evaluation Applied □ SAR Evaluation Note: 1. The maximum mix output power is 19.52dBm (89.54mW) with 1.58 numeric antenna gain. 2. For mobile or fixed location transmitters, no SAR consideration applied. The minimum separation generally be used is at least 20 cm, even if the calculations indicate that the MPE distance would be lesser. TEST RESULT No non-compliance noted. Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：cts@cts-lab.com.cn See Reverse For Terms And Conditions of Service Report No.: CGZ3161221-02442-EFI Page 1 of 2

FCC ID:BRWAR20300T IC:6157A-AR20300T Calculation Given (Equation 1) Where d = distance in cm P = Power in mW G = Numeric antenna gain S = Power Density in mW / cm2 Maximum Permissible Exposure EUT Output Power=89.54mW Numeric antenna gain=1.58dBi Substituting the MPE safe distance using d=20 cm into Equation 1 : Yields The power density S = 89.54×1.58/ (4∏×400) cm2 =0.028mW/cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW / cm2 even if the calculation indicates that the power density would be larger.) Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：cts@cts-lab.com.cn See Reverse For Terms And Conditions of Service Report No.: CGZ3161221-02442-EFI Page 2 of 2


Document Created: 2017-09-15 16:17:10
Document Modified: 2017-09-15 16:17:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC