RF Test Report

FCC ID: BRWAPRNTCSV1

Test Report

Download: PDF
FCCID_4033931

RF TEST REPORT Report No.: 18070891-FCC-R Supersede Report No.: N/A Applicant Horizon Hobby, LLC Product Name Receiver Main Model EFLR310013 Serial Model N/A Test Standard FCC Part 15.249; ANSI C63.10: 2013 Test Date August 10 to September 11, 2018 Issue Date October 12, 2018 Test Result Pass Fail Equipment complied with the specification Equipment did not comply with the specification Aaron Liang David Huang Test Engineer Checked By This test report may be reproduced in full only Test result presented in this test report is applicable to the tested sample only Issued by: SIEMIC (SHENZHEN-CHINA) LABORATORIES Zone A, Floor 1, Building 2 Wan Ye Long Technology Park South Side of Zhoushi Road, Bao’ an District, Shenzhen, Guangdong China 518108 Phone: +86 0755 2601 4629801 Email: China@siemic.com.cn

Test Report No. 18070891-FCC-R Page 2 of 34 Laboratories Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Scope USA EMC, RF/Wireless, SAR, Telecom Canada EMC, RF/Wireless, SAR, Telecom Taiwan EMC, RF, Telecom, SAR, Safety Hong Kong RF/Wireless, SAR, Telecom Australia EMC, RF, Telecom, SAR, Safety Korea EMI, EMS, RF, SAR, Telecom, Safety Japan EMI, RF/Wireless, SAR, Telecom Singapore EMC, RF, SAR, Telecom Europe EMC, RF, SAR, Telecom, Safety

Test Report No. 18070891-FCC-R Page 3 of 34 This page has been left blank intentionally.

Test Report No. 18070891-FCC-R Page 4 of 34 CONTENTS 1. REPORT REVISION HISTORY.............................................................................................................................5 2. CUSTOMER INFORMATION ................................................................................................................................5 3. TEST SITE INFORMATION ...................................................................................................................................5 4. EQUIPMENT UNDER TEST (EUT) INFORMATION .........................................................................................7 5. TEST SUMMARY ....................................................................................................................................................8 6. MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .....................................................................9 6.1 ANTENNA REQUIREMENT ................................................................................................................... 9 6.2 AC LINE CONDUCTED EMISSIONS .................................................................................................... 10 6.3 RADIATED SPURIOUS EMISSIONS .................................................................................................... 12 6.4 FIELD STRENGTH MEASUREMENT ................................................................................................... 20 6.5 20DB BANDWIDTH TESTING .............................................................................................................. 22 6.6 BAND EDGE............................................................................................................................................................. 26 ANNEX A. TEST INSTRUMENT ................................................................................................................................. 30 ANNEX B. TEST SETUP AND SUPPORTING EQUIPMENT ................................................................................ 31 ANNEX C. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PARTLIST/ DECLARATION OF SIMILARITY..................................................................................................................................................................... 34

Test Report No. 18070891-FCC-R Page 5 of 34 1. Report Revision History Report Report No. Description Issue Date Version 18070891-FCC-R NONE Original September 17, 2018 Updated the test data from “ August 10 to September 18070891-FCC-R V1 October 12, 2018 16, 2018” to “ August 10 to September 11, 2018” 2. Customer information Applicant Name Horizon Hobby, LLC Applicant Add 4105 Fieldstone Road, Champaign IL, USA 61822 Manufacturer Horizon Hobby, LLC Manufacturer Add 4105 Fieldstone Road, Champaign IL, USA 61822 3. Test site information Test Lab A: Lab performing tests SIEMIC (Shenzhen-China) LABORATORIES Zone A, Floor 1, Building 2 Wan Ye Long Technology Park Lab Address South Side of Zhoushi Road, Bao’ an District, Shenzhen, Guangdong China 518108 FCC Test Site No. 535293 IC Test Site No. 4842E-1 Test Software Radiated Emission Program-To Shenzhen v2.0 Test Lab B: Lab performing tests Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch Laboratories No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Lab Address Guangdong 523942, China FCC Test Site No. 749762

Test Report No. 18070891-FCC-R Page 6 of 34 IC Test Site No. 5936A-1 Test Software ADT_Radiated_V7.6.15.9.2 Note: We just perform Radiated Spurious Emission above 18GHz in the test Lab. B.

Test Report No. 18070891-FCC-R Page 7 of 34 4. Equipment under Test (EUT) Information Description of EUT: Receiver Main Model: EFLR310013 Serial Model: N/A Date EUT received: August 10, 2018 Test Date(s): August 10 to September 11, 2018 Antenna 0: 2dBi Antenna Gain: Antenna 1: 2dBi Antenna Type: Internal/external antenna Power: 63.79dBuV/m Type of Modulation: FHSS RF Operating Frequency (ies): 2404MHz-2476MHz Number of Channels: 23CH Input Power: 5V Port: Please refer to the user’ s manual Trade Name : E-flite FCC ID: BRWAPRNTCSV1

Test Report No. 18070891-FCC-R Page 8 of 34 5. Test Summary The product was tested in accordance with the following specifications. All testing has been performed according to below product classification: FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207(a) AC Line Conducted Emissions N/A §15.205, §15.209, Radiated Fundamental Compliance §15.249(a), §15.249(d) / Radiated Spurious Emissions §15.249(a) Field Strength Measurement Compliance §15.249© 20 dB Bandwidth Compliance §15.249(d) Band Edge Compliance Measurement Uncertainty Emissions Test Item Description Uncertainty Confidence level of approximately 95% (in the case Band Edge and Radiated where distributions are normal), with a coverage factor +5.6dB/-4.5dB Spurious Emissions of 2 (for EUTs < 0.5m X 0.5m X 0.5m) - - -

Test Report No. 18070891-FCC-R Page 9 of 34 6. MEASUREMENTS, EXAMINATION AND DERIVED RESULTS 6.1 Antenna Requirement Standard Requirement: According to § 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the user of a standard antenna jack or electrical connector is prohibited. The structure and application of the EUT were analyzed to determine compliance with section §15.203 of the rules. §15.203 state that the subject device must meet the following criteria: a. Antenna must be permanently attached to the unit. b. Antenna must use a unique type of connector to attach to the EUT. c. Unit must be professionally installed, and installer shall be responsible for verifying that the correct antenna is employed with the unit. Antenna Connector Construction The EUT has 2 antennas: A permanently attached internal/external antenna for antenna 0/antenna 1, the gain is 2dBi for antenna 0, the gain is 2dBi for antenna 1. Test Result: Pass

Test Report No. 18070891-FCC-R Page 10 of 34 6.2 AC Line Conducted Emissions Temperature ----- Relative Humidity ----- Atmospheric Pressure ----- Test date : ----- Tested By : ----- Spec Item Requirement Applicable For Low-power radio-frequency devices that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 [mu]H/50 ohms line impedance stabilization network §15.207 a) (LISN). The lower limit applies at the boundary between the frequencies ranges. Frequency ranges Limit (dBµV) (MHz) QP Average 0.15 ~ 0.5 66 – 56 56 – 46 0.5 ~ 5 56 46 5 ~ 30 60 50 Test Setup 1. The EUT and supporting equipment were set up in accordance with the requirements of the standard on top of a 1.5m x 1m x 0.8m high, non-metallic table. 2. The power supply for the EUT was fed through a 50W/50mH EUT LISN, connected to Procedure filtered mains. 3. The RF OUT of the EUT LISN was connected to the EMI test receiver via a low-loss coaxial cable.

Test Report No. 18070891-FCC-R Page 11 of 34 4. All other supporting equipment were powered separately from another main supply. 5. The EUT was switched on and allowed to warm up to its normal operating condition. 6. A scan was made on the NEUTRAL line (for AC mains) or Earth line (for DC power) over the required frequency range using an EMI test receiver. 7. High peaks, relative to the limit line, The EMI test receiver was then tuned to the selected frequencies and the necessary measurements made with a receiver bandwidth setting of 10 kHz. 8. Step 7 was then repeated for the LIVE line (for AC mains) or DC line (for DC power). Remark The EUT is powered by battery. Result Pass Fail N/A Test Data Yes N/A Test Plot Yes (See below) N/A

Test Report No. 18070891-FCC-R Page 12 of 34 6.3 Radiated Spurious Emissions Temperature 25oC Relative Humidity 58% Atmospheric Pressure 1016mbar Test date : August 16, 2018 Tested By : Aaron Liang Requirement(s): Spec Requirement Applicable The emissions from the Low-power radio-frequency devices shall not exceed the field strength levels specified in the following table and the level of any unwanted emissions shall not exceed the level of the fundamental emission. The tighter limit applies at the band edges. The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Field strength of Field strength of Fundamental fundamental harmonics frequency (millivolts/meter) (microvolts/meter) 902– 928 MHz 50 500 §15.209, 2400– 2483.5 MHz 50 500 §15.205, 5725– 5875 MHz 50 500 §15.249(a) & 24.0– 24.25 GHz 250 2500 §15.249(d) (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Frequency range (MHz) Field Strength (µV/m) 0.009~0.490 2400/F(KHz) 0.490~1.705 24000/F(KHz) 1.705~30.0 30 30 – 88 100 88 – 216 150 216 960 200 Above 960 500

Test Report No. 18070891-FCC-R Page 13 of 34 Test Setup - Setup the configuration according to figure 1. Turn on EUT and make sure that it is in normal function - For emission frequencies measured below 1GHz, a pre-scan is performed in a shielded chamber to determine the accurate frequencies of higher emissions will be checked on a open test site. As the same purpose, for emission frequencies measured above 1GHZ, a pre-scan also be performed with a meter measuring distance before final test. Procedure - For emission frequencies measured below and above 1GHz, set the spectrum analyzer on a 100kHz and 1MHz resolution bandwidth respectively for each frequency measured in step 2. - The search antenna is to be raised and lowered over a range from 1 to 4m in horizontally polarized orientation. Position the highness when the highest value is indicated on spectrum analyzer, the change the orientation of EUT on the test table over a range from 0 to 360°. With a speed as slow as possible, and keep the azimuth that highest emission is indicated on the spectrum analyzer.

Test Report No. 18070891-FCC-R Page 14 of 34 Vary the antenna position again and record the highest value as a final reading. - Repeat step 4 until all frequencies need to be measured was complete. - Repeat step5 with search antenna in vertical polarized orientations. Remark Result Pass Fail Test Data Yes N/A Test Plot Yes (See below) N/A

Test Report No. 18070891-FCC-R Page 15 of 34 Test Result (worst case): Test Mode: Transmitting Mode Frequency range: 9KHz - 30MHz Freq. Detection Factor Reading Result Limit@3m Margin (MHz) value (dB/m) (dBuV/m) (dBuV/m) (dBuV/m) (dB) -- -- -- -- -- -- >20 -- -- -- -- -- -- >20 Note: The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Distance extrapolation factor =40 log (specific distance/test distance)(dB); Limit line = specific limits(dBuv) + distance extrapolation factor.

Test Report No. 18070891-FCC-R Page 16 of 34 Test Mode: Normal Working Mode(worst case) 30MHz -1GHz Test Data Horizontal Polarity Plot @3m No. Frequency Reading Ant_F PA_G Cab_L Result Limit Margin Height Degre P/L e (MHz) (dBuV/m) (dB/m) (dB) (dB) (dBuV/m) (dBuV/m) (dB) (cm) ( º) 1 H 202.8104 46.57 12.06 22.37 1.55 37.81 43.50 -5.69 100 213 2 H 323.3204 49.37 14.09 22.22 1.91 43.15 46.00 -2.85 100 205 3 H 188.4125 50.83 11.46 22.30 1.51 41.50 43.50 -2.00 100 336 4 H 362.9845 46.63 14.92 22.11 2.03 41.47 46.00 -4.53 100 235 5 H 779.6068 38.17 21.16 21.19 2.92 41.06 46.00 -4.94 100 29 6 H 114.9169 36.00 13.01 22.35 1.17 27.83 43.50 -15.67 100 185

Test Report No. 18070891-FCC-R Page 17 of 34 30MHz -1GHz Test Data Vertical Polarity Plot @3m No. Frequency Reading Ant_F PA_G Cab_L Result Limit Margin Height Degre P/L e (MHz) (dBuV/m) (dB/m) (dB) (dB) (dBuV/m) (dBuV/m) (dB) (cm) ( º) 1 V 211.5265 46.31 11.94 22.36 1.58 37.47 43.50 -6.03 100 336 2 V 282.9852 46.18 12.85 22.29 1.76 38.50 46.00 -7.50 100 186 3 V 327.8873 39.17 14.19 22.21 1.93 33.08 46.00 -12.92 100 40 4 V 508.2582 37.02 17.82 21.79 2.43 35.48 46.00 -10.52 100 298 5 V 739.6605 37.87 20.68 21.28 2.80 40.07 46.00 -5.93 100 304 6 V 979.1804 36.77 22.90 20.73 3.35 42.29 54.00 -11.71 100 173

Test Report No. 18070891-FCC-R Page 18 of 34 Above 1GHz Test Mode: Normal Working Mode 2404MHz Frequency S.A. Detector Polarity Ant. Cable Pre-Amp. Cord. Limit Margin (MHz) Reading (PK/AV) (H/V) Factor Loss Gain Amp. (dBµV/m) (dB) (dBµV) (dB/m) (dB) (dB) (dBµV/m) 4808 46.92 AV V 33.39 7.22 48.46 39.07 54 -14.93 4808 43.56 AV H 33.39 7.22 48.46 35.71 54 -18.29 4808 57.46 PK V 33.39 7.22 48.46 49.61 74 -24.39 4808 66.73 PK H 33.39 7.22 48.46 58.88 74 -15.12 10437 30.72 AV V 39.02 12.94 46.78 35.9 54 -18.1 10437 28.87 AV H 39.02 12.94 46.78 34.05 54 -19.95 10437 46.74 PK V 39.02 12.94 46.78 51.92 74 -22.08 10437 40.15 PK H 39.02 12.94 46.78 45.33 74 -28.67 2440 MHz Frequency S.A. Detector Polarity Ant. Cable Pre-Amp. Cord. Limit Margin (MHz) Reading (PK/AV) (H/V) Factor Loss Gain Amp. (dBµV/m) (dB) (dBµV) (dB/m) (dB) (dB) (dBµV/m) 4880 44.64 AV V 33.62 7.53 48.36 37.43 54 -16.57 4880 45.79 AV H 33.62 7.53 48.36 38.58 54 -15.42 4880 59.15 PK V 33.62 7.53 48.36 51.94 74 -22.06 4880 63.6 PK H 33.62 7.53 48.36 56.39 74 -17.61 7109 30.03 AV V 39.92 13.03 46.57 36.41 54 -17.59 7109 21.45 AV H 39.92 13.03 46.57 27.83 54 -26.17 7109 39.11 PK V 39.92 13.03 46.57 45.49 74 -28.51 7109 44.13 PK H 39.92 13.03 46.57 50.51 74 -23.49

Test Report No. 18070891-FCC-R Page 19 of 34 2476 MHz Frequency S.A. Detector Polarity Ant. Cable Pre-Amp. Cord. Limit Margin (MHz) Reading (PK/AV) (H/V) Factor Loss Gain Amp. (dBµV/m) (dB) (dBµV) (dB/m) (dB) (dB) (dBµV/m) 4952 44.25 AV V 33.89 7.86 48.31 37.69 54 -16.31 4952 44.66 AV H 33.89 7.86 48.31 38.1 54 -15.9 4952 68.58 PK V 33.89 7.86 48.31 62.02 74 -11.98 4952 67.41 PK H 33.89 7.86 48.31 60.85 74 -13.15 17924 18.52 AV V 42.63 18.53 45.29 34.39 54 -19.61 17924 14.96 AV H 42.63 18.53 45.29 30.83 54 -23.17 17924 35.9 PK V 42.63 18.53 45.29 51.77 74 -22.23 17924 40.61 PK H 42.63 18.53 45.29 56.48 74 -17.52 Note: 1, The testing has been conformed to 10*2476MHz=24,760MHz 2, All other emissions more than 30 dB below the limit 3, X-Axis, Y-Axis and Z-Axis were investigated. The results above show only the worst case. 4, The radiated spurious test above 18GHz is subcontracted to Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch Laboratories and found 30dB below the limit at least.

Test Report No. 18070891-FCC-R Page 20 of 34 6.4 Field Strength Measurement Temperature 25oC Relative Humidity 58% Atmospheric Pressure 1016mbar Test date : August 16, 2018 Tested By : Aaron Liang Requirement(s): Spec Requirement Applicable §15.249(a) Test Setup Spectrum Analyzer EUT Emissions radiated outside of the specified frequency bands, except for Test harmonics, shall be attenuated by at least 50 dB below the level of the Procedure fundamental or to the general radiated emission limits in § 15.209, whichever is the lesser attenuation. Remark Result Pass Fail Test Data Yes N/A Test Plot Yes (See below) N/A

Test Report No. 18070891-FCC-R Page 21 of 34 Test Mode: Normal Working Mode Field Strength Measurement Antenna 0&1: 2404MHz Reading Correct P/L Frequency Measurement Limit Over Detector Level Factor (MHz) (dBuV/m) (dB/m) (dB) (dBuV/m) (dB) H 2404 80.99 -18.1 62.89 114 -51.11 peak H 2404 74.45 -18.1 56.35 94 -37.65 AVG V 2404 81.89 -18.1 63.79 114 -50.21 peak V 2404 77.21 -18.1 59.11 94 -34.89 AVG 2440MHz Reading Correct P/L Frequency Measurement Limit Over Detector Level Factor (MHz) (dBuV/m) (dB/m) (dB) (dBuV/m) (dB) H 2440 80.54 -18.05 62.49 114 -51.51 peak H 2440 73.27 -18.05 55.22 94 -38.78 AVG V 2440 79.22 -18.05 61.17 114 -52.83 peak V 2440 72.87 -18.05 54.82 94 -39.18 AVG 2476MHz Reading Correct P/L Frequency Measurement Limit Over Detector Level Factor (MHz) (dBuV/m) (dB/m) (dB) (dBuV/m) (dB) H 2476 80.08 -18.03 62.05 114 -51.95 peak H 2476 74.81 -18.03 56.78 94 -37.22 AVG V 2476 76.85 -18.03 58.82 114 -55.18 peak V 2476 72.38 -18.03 54.35 94 -39.65 AVG

Test Report No. 18070891-FCC-R Page 22 of 34 6.5 20dB Bandwidth Testing Temperature 26oC Relative Humidity 55% Atmospheric Pressure 1020mbar Test date : September 11, 2018 Tested By : Aaron Liang Requirement(s): Spec Item Requirement Applicable §15.215(c) a) Radiated Emissions Measurement Uncertainty All test measurements carried out are traceable to national standards. The uncertainty of the measurement at a confidence level of approximately 95% (in the case where distributions are normal), with a coverage factor of 2, in the range 30MHz – 1GHz ( 3m & 10m ) & 1GHz above ( 3m ) is +5.6/-4.5dB. Test Setup Spectrum Analyzer EUT - -Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. - Position the EUT on the test table without connection to measurement instrument. Turn on the EUT. Then set it to any one convenient frequency within its operating range. Set a reference Test level on the measuring instrument equal to the highest peak value. Procedure - Measure the frequency difference of two frequencies that were attenuated 20 dB from the reference level. Record the frequency difference as the emission bandwidth. - Repeat above procedures until all frequencies measured were complete.

Test Report No. 18070891-FCC-R Page 23 of 34 Remark Result Pass Fail Test Data Yes N/A Test Plot Yes (See below) N/A

Test Report No. 18070891-FCC-R Page 24 of 34 20dB Bandwidth measurement result Antenna 0: CH Fundamental Frequency 20dB Bandwidth Result (MHz) （MHz） Low 2404 1.297 Pass Middle 2440 1.381 Pass High 2476 1.256 Pass Test Plots 20dB Bandwidth measurement result 20dB Bandwidth – Low CH 2404 20dB Bandwidth - Middle CH 2440 20dB Bandwidth – High CH 2476

Test Report No. 18070891-FCC-R Page 25 of 34 Antenna 1: CH Fundamental Frequency 20dB Bandwidth Result (MHz) （MHz） Low 2404 1.322 Pass Middle 2440 1.263 Pass High 2476 1.253 Pass Test Plots 20dB Bandwidth measurement result 20dB Bandwidth – Low CH 2404 20dB Bandwidth - Middle CH 2440 20dB Bandwidth – High CH 2476

Test Report No. 18070891-FCC-R Page 26 of 34 6.6 Band Edge Temperature 25oC Relative Humidity 58% Atmospheric Pressure 1016mbar Test date : August 16, 2018 Tested By : Aaron Liang Spec Item Requirement Applicable Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at §15.249(d) a) least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Test Setup Spectrum Analyzer EUT - Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. - Position the EUT without connection to measurement instrument. Put it on the Rotated table and turn on the EUT and make it operate in transmitting mode. Then set it to Low Channel and High Channel within Test its operating range, and make sure the instrument is operated in its linear Procedure range. - Set both RBW and VBW of spectrum analyzer to 1MHz. - Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. - Repeat above procedures until all measured frequencies were complete. Remark Result Pass Fail

Test Report No. 18070891-FCC-R Page 27 of 34 Test Data Yes N/A Test Plot Yes (See below) N/A

Test Report No. 18070891-FCC-R Page 28 of 34 Test Plots Band Edge measurement result (worst case) GFSK-Hopping Left Side-PK GFSK-Hopping Right Side-PK Note: F1 is frequency 2400MHz Note: F1 is frequency 2483.5MHz Note: (no need if PK value less than the AV limit) Note: (no need if PK value less than the AV limit) GFSK-Hopping Left Side-AV GFSK-Hopping Right Side-AV Note: Both Horizontal and vertical polarities were investigated.

Test Report No. 18070891-FCC-R Page 29 of 34 GFSK-Left Side-PK GFSK-Right Side-PK Note: F1 is frequency 2400MHz Note: F1 is frequency 2483.5MHz Note: (no need if PK value less than the AV limit) GFSK-Left Side-AV GFSK-Right Side-AV Note: Both Horizontal and vertical polarities were investigated.

Test Report No. 18070891-FCC-R Page 30 of 34 Annex A. TEST INSTRUMENT Instrument Model Serial # Cal Date Cal Due In use AC Line Conducted EMI test receiver Emissions ESCS30 8471241027 09/15/2017 09/14/2018 Line Impedance LI-125A 191106 09/23/2017 09/22/2018 Line Impedance Stabilization Network LI-125A 191107 09/23/2017 09/22/2018 ISN Network Stabilization ISN T800 34373 09/23/2017 09/22/2018 Double Ridge Horn AH-118 71283 09/22/2017 09/21/2018 Antenna (1 ~18GHz) Transient Limiter LIT-153 531118 08/29/2018 08/28/2019 RF conducted test Agilent ESA-E SERIES E4407B MY45108319 09/15/2017 09/14/2018 Power Splitter SPECTRUM ANALYZER 1# 1# 08/29/2018 08/28/2019 DC Power Supply E3640A MY40004013 09/15/2017 09/14/2018 Radiated Emissions EMI test receiver ESL6 100262 09/15/2017 09/14/2018 Positioning Controller UC3000 MF780208282 11/17/2017 11/16/2018 OPT 010 AMPLIFIER 8447E 2727A02430 08/30/2017 08/29/2018 (0.1-1300MHz) Active Antenna AL-130 121031 10/12/2017 10/11/2018 (9kHz-30MHz) Microwave Preamplifier 8449B 3008A02402 03/22/2018 03/21/2019 (1～26.5GHz) Active Antenna AL-130 121031 10/12/2017 10/11/2018 (9kHz-30MHz) Bilog Antenna JB6 A110712 09/19/2017 09/18/2018 (30MHz~6GHz) Double Ridge Horn AH-118 71283 09/22/2017 09/21/2018 Antenna (1 ~18GHz) Universal Radio Communication Tester CMU200 121393 09/23/2017 09/22/2018

m Test Report No. 1807089 1—FCC—R s?E M l C A Bureau Veritas Group Company Page 31 of 34 Annex B. TEST SETUP AND SUPPORTING EQUIPMENT Annex B.i. TEST SET UP BLOCK Block Configuration Diagram for Radiated Emissions A Test Table I 80cm above ground for below 1GHz:; d=3meter Receiving Antenna

m Test Report No. 1807089 1—FCC—R s?E M l C A Bureau Veritas Group Company Page 32 of 34 Block Configuration Diagram for Radiated Emissions A esns > : | Test Table / I.____.I ______ 1 T pTTTTTATATCCICImI ! 150cm above | ; ; |— ground for above E 1 t 1GHz ; i; i| | | prmnenn=n 99y i d=3meter : 1 t prosssssssssssssess 1 Receiving Antenna

Test Report No. 18070891-FCC-R Page 33 of 34 Annex B. ii. SUPPORTING EQUIPMENT DESCRIPTION The following is a description of supporting equipment and details of cables used with the EUT. Manufacturer Equipment Description Model Serial No. N/A Power supply N/A N/A

Test Report No. 18070891-FCC-R Page 34 of 34 Annex C. User Manual / Block Diagram / Schematics / Partlist/ DECLARATION OF SIMILARITY Please see attachment


Document Created: 2019-09-22 08:12:14
Document Modified: 2019-09-22 08:12:14
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC