User Manual

FCC ID: BKMAE-7122

Users Manual

Download: PDF

FCCID_2551574

Caution
 This unit should only be used for Epson projectors.
If it is installed on another device such as a computer, it may result in
computer failure, damage, or malfunctions.
 Do not disassemble or remodel this unit.

EN
This may result in burns.
 This unit is only for indoor use.
 To comply with RF exposure compliance requirements, a distance of at
least 20 cm must be maintained at all times between the antenna of this
unit and people in the vicinity.

Precautions
Notes on Handling and Storage
 Do not store in locations with high temperatures or high humidity. It may in
particular be damaged or deformed if left in a vehicle with the windows shut, or
placed in locations with unusually high temperatures for extended periods
such as in direct sunlight.
 Do not get it wet. This may cause malfunctions to occur.
 Do not use near microwave ovens. Wireless communication may be interrupted
by electromagnetic interference generated by microwave ovens.
 Do not drop it, subject it to shocks, or place heavy objects on it.
Frequency Precautions
The frequency band for this unit is 2.4 GHz. This frequency range is the same
frequency bandwidth as industrial, scientific, and medical devices such as
microwave ovens and mobile unit identification (RF‐ID) systems (licensed
premises radio stations and unlicensed specified low‐power radio stations) used
in factory production lines. Before using this unit, check that there are no radio
stations for mobile unit identification or specified low‐power radio station
premises nearby. In the event that this unit should interfere electromagnetically
with the premises of a radio station used for mobile unit recognition, cease use
immediately and stop generating the electromagnetic field. Contact your local
dealer or the nearest address provided in the "Support and Service Guide"
supplied with the projector if this unit interferes electromagnetically with a
special low‐power radio station used for mobile unit identification or causes
similar problems.
3

Wireless Telegraphy Act Regulations
The following acts are prohibited by the Wireless Telegraphy Act.
 Modifying and disassembling (including the antenna)
 Removing the label of conformance
International Travel Precautions
Wireless devices are designed to conform to the channel and frequency limits of
the country they are intended to be used in. This unit is based on the
specifications of the country of sale. If this unit is used outside the country of
sale, check with a local dealer for more information.
Notes on Security when Using Wireless LAN
(Important information on customer rights (maintaining privacy))
The advantage of using a wireless LAN over a LAN cable is that, because
information is exchanged using radio signals, you can easily connect to the
network if you are within range of the radio signals. A disadvantage of this is that
within a certain range, the electromagnetic signals can pass through barriers
such as walls, so that if security countermeasures are not implemented in some
way, problems such as the following may occur.
 Communicated data can be intercepted
A third party may be able to receive wireless transmissions without
authorization, and they could obtain personal information from these
transmissions such as IDs, passwords, or credit card numbers, or they could
intercept the contents of personal e‐mail messages.
 Unauthorized access to the network
A third party could access an individual or intra‐company network without
permission and carry out any of the following activities.
‐ Retrieve personal data or other secret information (information leakage)
‐ Pose as another user and send inappropriate data (impersonation)
‐ Overwrite the contents of intercepted data and resend it (falsification)
‐ Introduce a computer virus which could cause data loss or system crashes
(damage)
Initially, the possibility that such problems could occur through settings
concerning the security of the wireless LAN product and by using the product
are decreased, because the wireless LAN card and the access point have
security measures to deal with these problems. We recommend that you use
this product after making security settings using your own judgment and
assuming full responsibility, and with your full understanding of problems that
may occur if you do not make any security settings.
See the "User's Guide" on the "Document CD‐ROM" supplied with the projector
for more information on security settings.
4

Indication of the manufacturer and the importer in accordance with
requirements of directive 2011/65/EU (RoHS)
Manufacturer: SEIKO EPSON CORPORATION
Address: 3‐5, Owa 3‐chome, Suwa‐shi, Nagano‐ken 392‐8502 Japan
Telephone: 81‐266‐52‐3131
Importer: SEIKO EUROPE B.V. Address: Azie building, Atlas ArenA,
Hoogoorddreef 5, 1101 BA Amsterdam Zuidoost
The Netherlands
Telephone: 31‐20‐314‐5000
EPSON is a registered trademark, EXCEED YOUR VISION and logos are
registered trademarks or trademarks of Seiko Epson Corporation.
Windows is a trademark or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
OS X is a registered trademark of Apple Inc. App Store is a service mark of
Apple Inc.
Android and Google play are trademarks of Google Inc.
All other trademarks are the property of their respective owners and used
for identification purpose only.

© SEIKO EPSON CORPORATION 2014. All rights reserved.

9

Document Created: 2015-03-10 19:59:59
Document Modified: 2015-03-10 19:59:59

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC