MPE_Calculation_BEJTLVLM3IU-N_FCC

FCC ID: BEJTLVLM3IU-N

RF Exposure Info

Download: PDF
FCCID_4192956

FCC ID: BEJTLVLM3IU-N MPE Calculation : 2.4GHz WiFi Max. Target Maximum power Frequency range ANT Gain Maximum EIRP Maximum EIRP Requriment RF function or Mode Power density (MHz) (dBi) (dBm) (mW) (mW/cm2) (dBm) (mW/cm2) 802.11b 2412.00 ~ 2462.00 18.50 1.97 20.47 111.430 0.0222 1.000 802.11g 2412.00 ~ 2462.00 15.50 1.97 17.47 55.848 0.0112 1.000 802.11n(HT20) 2412.00 ~ 2462.00 15.00 1.97 16.97 49.774 0.010 1.000 ~ ~ ~ ~ ~ The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below. ▪S= EIRP / ( 4 R2 π ) - Note = 111.43 / ( 4 X 202 X π ) S= Maximum power density(mW/cm2) = 0.0222 mW/cm2 EIRP= Equivalent Isotropic Radiated Power(mW) R= Distance to the center of the radiation of the antenn ▪ Limits for Maximum Permissible Exposure (MPE) Electric Field Magnetic field Frequency range Power Density Averageing time strength strength 2 (MHz) (mW/cm ) (minutes) (V/m) (A/m) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : The exposure condition of this device is compliant with FCC

FCC ID: BEJTLVLM3IU-N MPE Calculation : LTE, WCDMA, GSM Tune-up Max Measured Adjusted EIRP to Maximum power Frequency range Maximum EIRP Requriment RF function or Mode Conducted Conducted tune-up density (MHz) (dBm) (mW/cm2) power(dBm) power(dBm) Max(dBm) (mW/cm2) LTE(Band 2) 1850.00 ~ 1910.00 23.00 22.19 20.02 20.830 0.0241 1.000 LTE(Band 4) 1710.00 ~ 1755.00 23.00 22.45 21.00 21.550 0.0285 1.000 LTE(Band 5) 824.00 ~ 849.00 23.00 22.14 20.06 20.920 0.0246 0.549 LTE(Band 12,17) 699.00 ~ 716.00 23.00 21.92 18.18 19.260 0.0168 0.466 LTE(Band 13) 777.00 ~ 787.00 23.00 21.91 17.24 18.330 0.0136 0.518 WCDMA(850) 826.40 ~ 846.60 24.00 22.75 19.66 20.910 0.0246 0.550 WCDMA(1700) 1712.40 ~ 1752.60 24.00 23.46 19.87 20.410 0.0219 1.000 WCDMA(1900) 1852.40 ~ 1907.60 24.00 21.67 20.76 23.090 0.0406 1.000 GSM(850) 824.20 ~ 848.80 33.00 31.83 28.71 29.880 0.1936 0.549 GSM(1900) 1850.20 ~ 1909.80 31.00 29.87 24.34 25.470 0.0702 1.000 The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below. ▪S= EIRP / ( 4 R2 π ) - Note = 20.83 / ( 4 X 202 X π ) S= Maximum power density(mW/cm2) = 0.0241 mW/cm2 EIRP= Equivalent Isotropic Radiated Power(mW) R= Distance to the center of the radiation of the antenna(2 ▪ Limits for Maximum Permissible Exposure (MPE) Electric Field Magnetic field Frequency range Power Density Averageing time strength strength (MHz) (mW/cm2) (minutes) (V/m) (A/m) 0.3 ~ 1.34 614 1.63 *100 30 2 1.34 ~ 30 824/f 2.19 / f *180 / f 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : The exposure condition of this device is compliant with FCC

FCC ID: BEJTLVLM3IU-N RF Exposure Compliance for simultaneous operations ▪ Configurations for simultaneous operations - Configuration 1: 2.4 GHz WiFi + (LTE or WCDMA or GSM) Note: Above configuration was declared from applicant. ▪ Configurations for simultaneous operation RF function or mode 2.4GHz WiFi LTE GSM Band 2.4GHz Band 4 Band 12(17) Band13 850 1900 Power Density 0.0222 0.0285 0.0168 0.0136 0.1936 0.0702 (mW/cm2) Σ of MPE ratios Requirement 1.0000 1.0000 0.4660 0.5180 0.5490 1.0000 (mW/cm2) MPE ratio 0.0222 0.0285 0.0361 0.0263 0.3526 0.0702 (Power Density/Requirement) 0.0222 0.0285 0.0507 0.0222 0.0361 0.0583 Configuration 1 (MPE ratio) 0.0222 0.0263 0.0485 0.0222 0.3526 0.3748 0.0222 0.0702 0.0924 Note: The maximum power density in each RF function was used for above table. ▪ Requirment = Σ of MPE ratios ≤ 1 Conclusion : The exposure condition of this device is compliant with FCC


Document Created: 2019-02-27 20:52:14
Document Modified: 2019-02-27 20:52:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC