FCC modular approval request

FCC ID: BEJRBHP-B213B

Attestation Statements

Download: PDF
FCCID_4379132

                                   LG Electronics USA
Modular Transmitter Approval Request
Federal Communications Commission
Equipment Authorization Branch
7435 Oakland Mills Road
Columbia, MD 21046

Company name: LG Electronics USA
FCC ID: BEJRBHP-B213B
Gentlemen,

In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module
Certification Guide v01r04’. FCC ID BEJRBHP-B213B has been examined against the following
requirements.
 Requirement per 15.212 and KDB 996369 D01                              Explanation from Grantee
 ‘Modular Certification Guide v01r04                                    (do not write yes/no, but explain why product
                                                                        complies/how it is achieved)
 The radio elements must have the radio frequency circuitry             Yes
 shielded. Physical components and tuning capacitor(s) may be
 located external to the shield, but must be on the module
 assembly
 The module must have buffered modulation/data inputs to ensure         Yes
 that the device will comply with Part 15 requirements with any
 type of input signal
                                                                        Yes
 The module must contain power supply regulation on the module

 The module must contain a permanently attached antenna, or             Yes
 contain a unique antenna connector, and be marketed and
 operated only with specific antenna(s), per Sections 15.203,
 15.204(b), 15.204(c), 15.212(a), 2.929(b)
                                                                        Yes
 The module must demonstrate compliance in a stand-alone
 configuration

 The module must be labelled with its permanently affixed FCC ID        Yes
 label, or use an electronic display (See KDB Publication 784748
 about labelling requirements)
 The module must comply with all specific rules applicable to the       Yes
 transmitter including all the conditions provided in the integration
 instructions by the grantee
                                                                        Yes
 The module must comply with RF exposure requirements



Name: Kyung-Su, Han                                                                        Date: July 23, 2019

Title: Director, Standards & Compliance




Signature of applicant:


FCC – Modular Approval Request Rev 2.0



Document Created: 2019-07-23 09:44:05
Document Modified: 2019-07-23 09:44:05

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC