SAR plots

FCC ID: BCGA2159

RF Exposure Info

Download: PDF
FCCID_4341490

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 12.2. System Check Plots This appendix contains the following system validation distribution scans. Scan Reference Number Title SYS/001 System Check 2450MHz Body 11 03 19 (Site 61) SYS/002 System Check 2450MHz Body 15 03 19 (Site 61) SYS/003 System Check 5250MHz Body 07 03 19 (Site 60) SYS/004 System Check 5250MHz Body 11 03 19 (Site 60) SYS/005 System Check 5600MHz Body 11 03 19 (Site 60) SYS/006 System Check 5750MHz Body 11 03 19 (Site 61) SYS/007 System Check 5750MHz Body 15 03 19 (Site 61) Page 51 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/001: System Check 2450MHz Body 11 03 19 (Site 61) Date: 11/03/2019 DUT: D2450V2; Type: D2450V2; Serial: SN725 Communication System: Comm UID: 0 Frequency: 2450.0 MHz; ; Duty Cycle: 1.0 Medium: MSL-600-6000 Medium parameters used: f = 2450.0 MHz; σ = 2.04 S/m; ε r = 52.7; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN7495; ConvF(7.75, 7.75, 7.75); Calibrated: 2018-03-16; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (48.0x96.0): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (30.0x30.0x30.0): Measurement grid: dx=5.0mm, dy=5.0mm, dz=5.0mm Reference Value = 1.83 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 2.46 W/kg; SAR(10 g) = 1.14 W/kg Page 52 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/002: System Check 2450MHz Body 15 03 19 (Site 61) Date: 15/03/2019 DUT: D2450V2; Type: D2450V2; Serial: SN725 Communication System: Comm UID: 0 Frequency: 2450.0 MHz; ; Duty Cycle: 1.0 Medium: MSL-600-6000 Medium parameters used: f = 2450.0 MHz; σ = 2.03 S/m; ε r = 53.4; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: ES3DV3 - SN3358; ConvF(4.52, 4.52, 4.52); Calibrated: 2019-01-21; - Sensor-Surface: 3.0mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (48.0x96.0): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (30.0x30.0x30.0): Measurement grid: dx=5.0mm, dy=5.0mm, dz=5.0mm Reference Value = 1.68 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 2.49 W/kg; SAR(10 g) = 1.16 W/kg Page 53 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/003: System Check 5250MHz Body 07 03 2019 (Site 60) Date: 07/03/2019 DUT: D5GHzV2 - SN1016; Type: D5GHzV2; Serial: SN1016 Communication System: Comm UID: 0 Frequency: 5250.0 MHz; ; Duty Cycle: 1.0 Medium: MBBL-600-6000 Medium parameters used: f = 5250.0 MHz; σ = 5.46 S/m; ε r = 47.7; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN3995; ConvF(4.78, 4.78, 4.78); Calibrated: 2018-04-24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn450; Calibrated: 2018-09-13 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: xxxx Area Scan (40.0x80.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (22.0x22.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 8.89 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 7.13 W/kg; SAR(10 g) = 2.00 W/kg Page 54 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/004: System Check 5250MHz Body 11 03 19 (Site 60) Date: 11/03/2019 DUT: D5GHzV2 - SN1016; Type: D5GHzV2; Serial: SN1016 Communication System: Comm UID: 0 Frequency: 5250.0 MHz; ; Duty Cycle: 1.0 Medium: MBBL-600-6000 Medium parameters used: f = 5250.0 MHz; σ = 5.30 S/m; ε r = 48.3; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN3995; ConvF(4.78, 4.78, 4.78); Calibrated: 2018-04-24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn450; Calibrated: 2018-09-13 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: xxxx Area Scan (40.0x80.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (24.0x24.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 11.34 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 7.43 W/kg; SAR(10 g) = 2.09 W/kg Page 55 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/005: System Check 5600MHz Body 11 03 19 (Site 60) Date: 12/03/2019 DUT: D5GHzV2 - SN1016; Type: D5GHzV2; Serial: SN1016 Communication System: Comm UID: 0 Frequency: 5600.0 MHz; ; Duty Cycle: 1.0 Medium: MBBL-600-6000 Medium parameters used: f = 5600.0 MHz; σ = 5.79 S/m; ε r = 47.6; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN3995; ConvF(4.36, 4.36, 4.36); Calibrated: 2018-04-24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn450; Calibrated: 2018-09-13 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: xxxx Area Scan (40.0x80.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (24.0x24.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 10.20 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 7.66 W/kg; SAR(10 g) = 2.13 W/kg Page 56 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/006: System Check 5750MHz Body 11 03 2019 (Site 61) Date: 11/03/2019 DUT: D5GHzV2 - SN1222; Type: D5GHzV2; Serial: SN1222 Communication System: Comm UID: 0 Frequency: 5750.0 MHz; ; Duty Cycle: 1.0 Medium: MBBL-600-6000 Medium parameters used: f = 5750.0 MHz; σ = 6.18 S/m; ε r = 46.5; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN7495; ConvF(4.51, 4.51, 4.51); Calibrated: 2018-03-16; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (40.0x80.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (22.0x22.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 2.20 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 7.52 W/kg; SAR(10 g) = 2.10 W/kg Page 57 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SYS/007 System Check 5750MHz Body 15 03 19 (Site 61) Date: 15/03/2019 DUT: D5GHzV2 - SN1222; Type: D5GHzV2; Serial: SN1222 Communication System: Comm UID: 0 Frequency: 5750.0 MHz; ; Duty Cycle: 1.0 Medium: MBBL-600-6000 Medium parameters used: f = 5750.0 MHz; σ = 6.09 S/m; ε r = 47.6; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN7495; ConvF(4.51, 4.51, 4.51); Calibrated: 2018-03-16; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (40.0x80.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (22.0x22.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 2.61 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 7.67 W/kg; SAR(10 g) = 2.15 W/kg Page 58 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 12.3. SAR Test Plots Scan Reference Number Title SAR/001 Back 0mm WiFi 2.4 GHz 802.11n HT20 MIMO Ant W1+WF2 CH10 SAR/002 Back 0mm WiFi 5.3 GHz 802.11ac VHT80 SISO ANT WF2 CH58 SAR/003 Back 0mm WiFi 5.6 GHz 802.11ac VHT80 SISO ANT WF2 CH106 SAR/004 Back 0mm WiFi 5.8 GHz 802.11ac VHT80 MIMO Ant WF1+WF2 CH155 SAR/005 Back 0mm BT (WiFi 5.0 GHz OFF) GFSK SISO WF1 CH78 SAR/006 Back 0mm BT (WiFi 5.0 GHz ON) GFSK SISO WF1 CH78 Page 59 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SAR/001: Back 0mm WiFi 2.4 GHz 802.11n HT20 MIMO Ant WF1+WF2 CH10 Date: 12/03/2019 DUT: Apple Inc.; Type: Laptop Device ; Model No: A2159 Communication System: WCDMA UID: 10196 Frequency: 2457.0 MHz; ; Duty Cycle: 1.0 Medium: MBBL-600-6000 Medium parameters used: f = 2457.0 MHz; σ = 2.04 S/m; ε r = 52.7; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN7495; ConvF(7.75, 7.75, 7.75); Calibrated: 2018-03-16; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (120.0x312.0): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (30.0x30.0x30.0): Measurement grid: dx=5.0mm, dy=5.0mm, dz=5.0mm Reference Value = 0.64 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.926 W/kg; SAR(10 g) = 0.377 W/kg Page 60 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SAR/002: Back 0mm WiFi 5.3 GHz 802.11ac VHT80 SISO ANT WF2 CH58 Date: 11/03/2019 DUT: Apple Inc.; Type: Laptop Device ; Model No: A1259 Communication System: WCDMA UID: 10544 Frequency: 5290.0 MHz; ; Duty Cycle: 0.99 Medium: MBBL-600-6000 Medium parameters used: f = 5290.0 MHz; σ = 5.35 S/m; ε r = 48.2; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN3995; ConvF(4.78, 4.78, 4.78); Calibrated: 2018-04-24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn450; Calibrated: 2018-09-13 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: xxxx Area Scan (120.0x180.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (24.0x24.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 1.08 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.837 W/kg; SAR(10 g) = 0.292 W/kg Page 61 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SAR/003: Back 0mm WiFi 5.6 GHz 802.11ac VHT80 SISO ANT WF2 CH106 Date: 14/03/2019 DUT: Apple Inc.; Type: Laptop Device ; Model No: A2159 Communication System: WCDMA UID: 10544 Frequency: 5530.0 MHz; ; Duty Cycle: 0.99 Medium: MBBL-600-6000 Medium parameters used: f = 5530.0 MHz; σ = 5.69 S/m; εr = 47.7; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN3995; ConvF(4.36, 4.36, 4.36); Calibrated: 2018-04-24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn450; Calibrated: 2018-09-13 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: xxxx Area Scan (120.0x180.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (24.0x24.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=1.4mm Reference Value = 0.77 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.751 W/kg; SAR(10 g) = 0.256 W/kg Page 62 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SAR/004: Back 0mm WiFi 5.8 GHz 802.11ac VHT80 MIMO Ant WF1+WF2 CH155 Date: 15/03/2019 DUT: Apple Inc.; Type: Laptop Device ; Model No: A2159 Communication System: WCDMA UID: 10544 Frequency: 5775.0 MHz; ; Duty Cycle: 0.99 Medium: MBBL-600-6000 Medium parameters used: f = 5775.0 MHz; σ = 6.12 S/m; ε r = 47.7; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: EX3DV4 - SN7495; ConvF(4.51, 4.51, 4.51); Calibrated: 2018-03-16; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (120.0x300.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (24.0x24.0x22.0): Measurement grid: dx=4.0mm, dy=4.0mm, dz=2.0mm Reference Value = 0.27 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.879 W/kg; SAR(10 g) = 0.297 W/kg Page 63 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SAR/005: Back 0mm BT (WiFi 5.0 GHz OFF) GFSK SISO WF1 CH78 Date: 18/03/2019 DUT: Apple Inc.; Type: Laptop Device ; Model No: A2159 Communication System: WCDMA UID: 10032 Frequency: 2480.0 MHz; ; Duty Cycle: 0.77 Medium: MBBL-600-6000 Medium parameters used: f = 2480.0 MHz; σ = 2.06 S/m; ε r = 53.3; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: ES3DV3 - SN3358; ConvF(4.52, 4.52, 4.52); Calibrated: 2019-01-21; - Sensor-Surface: 3.0mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (120.0x120.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (30.0x30.0x30.0): Measurement grid: dx=5.0mm, dy=5.0mm, dz=5.0mm Reference Value = 0.19 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.316 W/kg; SAR(10 g) = 0.130 W/kg Page 64 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.

REPORT NO: UL-SAR-RP12743108JD04A V1.0 Issue Date: 03 June 2019 SAR/006: Back 0mm BT (WiFi 5.0 GHz ON) GFSK SISO WF1 CH78 Date: 18/03/2019 DUT: Apple Inc.; Type: Laptop Device ; Model No: A2159 Communication System: WCDMA UID: 10032 Frequency: 2480.0 MHz; ; Duty Cycle: 0.77 Medium: MBBL-600-6000 Medium parameters used: f = 2480.0 MHz; σ = 2.06 S/m; εr = 53.3; ρ = 1000 kg/m3 Phantom section: Flat DASY6 Configuration: - Probe: ES3DV3 - SN3358; ConvF(4.52, 4.52, 4.52); Calibrated: 2019-01-21; - Sensor-Surface: 3.0mm (Mechanical Surface Detection) - Electronics: DAE4 Sn431; Calibrated: 2018-06-08 - Phantom: Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (120.0x120.0): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.203 W/kg Zoom Scan (30.0x30.0x30.0): Measurement grid: dx=5.0mm, dy=5.0mm, dz=5.0mm Reference Value = 0.07 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.107 W/kg; SAR(10 g) = 0.043 W/kg Page 65 of 68 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd.


Document Created: 2019-07-02 17:28:42
Document Modified: 2019-07-02 17:28:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC