SAR WCDMA Band V

FCC ID: BCGA1459

RF Exposure Info

Download: PDF
FCCID_1813927

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 1.005 mho/m; εr = 52.813; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Rear/Rel.99_RMC 12.2kbps_Ch 4132/Area Scan (10x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.237 mW/g Rear/Rel.99_RMC 12.2kbps_Ch 4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 38.271 V/m; Power Drift = -0.0067 dB Peak SAR (extrapolated) = 2.1330 SAR(1 g) = 1.08 mW/g; SAR(10 g) = 0.567 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.540 mW/g 0 dB = 1.540mW/g = 3.75 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Rear/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (10x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.275 mW/g Rear/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 38.885 V/m; Power Drift = 0.0066 dB Peak SAR (extrapolated) = 2.2260 SAR(1 g) = 1.13 mW/g; SAR(10 g) = 0.591 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.610 mW/g 0 dB = 1.610mW/g = 4.14 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1 Rear/Rel.99_RMC 12.2kbps_Ch 4183/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.494 mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 1.025 mho/m; εr = 52.595; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Rear/Rel.99_RMC 12.2kbps_Ch 4233/Area Scan (10x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.163 mW/g Rear/Rel.99_RMC 12.2kbps_Ch 4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 37.198 V/m; Power Drift = -0.006 dB Peak SAR (extrapolated) = 2.0320 SAR(1 g) = 1.03 mW/g; SAR(10 g) = 0.536 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.537 mW/g 0 dB = 1.540mW/g = 3.75 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 1.005 mho/m; εr = 52.813; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Edge 1/Rel.99_RMC 12.2kbps_Ch 4132/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.200 mW/g Edge 1/Rel.99_RMC 12.2kbps_Ch 4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.322 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 1.5600 SAR(1 g) = 0.812 mW/g; SAR(10 g) = 0.452 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.201 mW/g 0 dB = 1.200mW/g = 1.58 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Edge 1/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.189 mW/g Edge 1/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.005 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.5190 SAR(1 g) = 0.783 mW/g; SAR(10 g) = 0.431 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.167 mW/g 0 dB = 1.170mW/g = 1.36 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 1.025 mho/m; εr = 52.595; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Edge 1/Rel.99_RMC 12.2kbps_Ch 4233/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.998 mW/g Edge 1/Rel.99_RMC 12.2kbps_Ch 4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.991 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.2800 SAR(1 g) = 0.652 mW/g; SAR(10 g) = 0.355 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.981 mW/g 0 dB = 0.980mW/g = -0.18 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 1.005 mho/m; εr = 52.813; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 41 deg Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4132/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.946 mW/g 41 deg Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 35.991 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.0280 SAR(1 g) = 0.990 mW/g; SAR(10 g) = 0.504 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.516 mW/g 0 dB = 1.520mW/g = 3.64 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 41 deg Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.594 mW/g 41 deg Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 39.496 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 2.3150 SAR(1 g) = 1.09 mW/g; SAR(10 g) = 0.551 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.398 mW/g 0 dB = 1.400mW/g = 2.92 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 1.025 mho/m; εr = 52.595; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 41 deg Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4233/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.909 mW/g 41 deg Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 35.171 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 1.9750 SAR(1 g) = 0.977 mW/g; SAR(10 g) = 0.491 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.460 mW/g 0 dB = 1.460mW/g = 3.29 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Rear with 12mm/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (10x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.708 mW/g Rear with 12mm/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.125 V/m; Power Drift = -0.0054 dB Peak SAR (extrapolated) = 0.9640 SAR(1 g) = 0.639 mW/g; SAR(10 g) = 0.409 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.813 mW/g 0 dB = 0.810mW/g = -1.83 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Edge 1 with 14mm/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.609 mW/g Edge 1 with 14mm/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.203 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.7230 SAR(1 g) = 0.493 mW/g; SAR(10 g) = 0.323 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.615 mW/g 0 dB = 0.620mW/g = -4.15 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 27 deg Right Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.381 mW/g 27 deg Right Tilt @ Edge 1/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.825 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.9150 SAR(1 g) = 0.377 mW/g; SAR(10 g) = 0.238 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.696 mW/g 0 dB = 0.700mW/g = -3.10 dB mW/g

Test Laboratory: Lab C Date: 9/18/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.015 mho/m; εr = 52.696; ρ = 1000 kg/m DASY5 Configuration: - Electronics: DAE4 Sn1261; Calibrated: 3/9/2012 - Probe: EX3DV4 - SN3757; ConvF(9, 9, 9); Calibrated: 3/24/2012 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: Back ELI v5.0; Type: QDOVA002AA; Serial: 1136 Edge 2/Rel.99_RMC 12.2kbps_Ch 4183/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.285 mW/g Edge 2/Rel.99_RMC 12.2kbps_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.967 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.7470 SAR(1 g) = 0.340 mW/g; SAR(10 g) = 0.187 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.553 mW/g 0 dB = 0.550mW/g = -5.19 dB mW/g


Document Created: 2012-10-08 21:56:23
Document Modified: 2012-10-08 21:56:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC