MPE Report

FCC ID: BCGA1408

RF Exposure Info

Download: PDF

FCCID_1486496

$REPORT NO: 11U13614-2B DATE: JUNE 13, 2011 FCC ID: BCGA1408 IC: 579C-A1408 EQUATIONS Power density is given by: S = EIRP / (4 * Pi * D^2) where S = Power density in W/m^2 EIRP = Equivalent Isotropic Radiated Power in W D = Separation distance in m Power density in units of W/m^2 is converted to units of mWc/m^2 by dividing by 10. Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) where D = Separation distance in m EIRP = Equivalent Isotropic Radiated Power in W S = Power density in W/m^2 For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the Power * Gain product (in linear units) of each transmitter. Total EIRP = (P1 * G1) + (P2 * G2) + ... + (Pn * Pn) where Px = Power of transmitter x Gx = Numeric gain of antenna x For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply, a fraction of the exposure limit is established for each band, such that the sum of the fractions is less than or equal to one. In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency, as 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) and 824 MHz / 150 = 5.5 W/m^2 (IC). From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2 Page 293 of 299 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS.$

REPORT NO: 11U13614-2B DATE: JUNE 13, 2011
FCC ID: BCGA1408 IC: 579C-A1408

RESULTS

Worst-case of 11a, HT20, HT40 (2 chains)

Multiple chain or colocated transmitters
Band Mode Chain Separation Output Antenna EIRP EIRP IC Power FCC Power
for Distance AV Power Gain Density Density
MIMO (m) (dBm) (dBi) (dBm) (W) (W/m^2) (mW/cm^2)
5 GHz WLAN 1 15.00 3.14 18.14 0.07
5 GHz WLAN 2 16.80 2.38 19.18 0.08
Combined 0.20 0.15 0.29 0.029

Worst-case of 11a, HT20, HT40 (3 chains)

Multiple chain or colocated transmitters
Band Mode Chain Separation Output Antenna EIRP EIRP IC Power FCC Power
for Distance AV Power Gain Density Density
MIMO (m) (dBm) (dBi) (dBm) (W) (W/m^2) (mW/cm^2)
5 GHz WLAN 1 13.00 3.14 16.14 0.04
5 GHz WLAN 2 14.90 2.23 17.13 0.05
5 GHz WLAN 3 16.50 2.38 18.88 0.08
Combined 0.20 0.17 0.34 0.034

Page 294 of 299
COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of CCS.

Document Created: 2011-06-16 11:54:22
Document Modified: 2011-06-16 11:54:22