SAR attachment 2

FCC ID: BCGA1213

RF Exposure Info

Download: PDF
FCCID_838931

Date/Time: 7/30/2007 10:37:12 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2412 MHz; σ = 1.92 mho/m; εr = 53.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Up - b mode L ch/Area Scan (6x5x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.749 mW/g LCD Up - b mode L ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 23.8 V/m; Power Drift = -0.163 dB Peak SAR (extrapolated) = 3.29 W/kg SAR(1 g) = 1.11 mW/g; SAR(10 g) = 0.412 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.16 mW/g

Date/Time: 7/30/2007 10:00:37 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 2.01 mho/m; εr = 54; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Up - b mode M ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.18 mW/g LCD Up - b mode M ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 2.80 V/m; Power Drift = 0.159 dB Peak SAR (extrapolated) = 3.22 W/kg SAR(1 g) = 1.17 mW/g; SAR(10 g) = 0.422 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.53 mW/g

Date/Time: 7/30/2007 10:13:31 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 LCD Up - b mode M ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.75 mW/g

Date/Time: 7/31/2007 6:37:38 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.99 mho/m; εr = 54.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Up - b mode H ch/Area Scan (6x5x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.809 mW/g LCD Up - b mode H ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 3.14 V/m; Power Drift = 0.114 dB Peak SAR (extrapolated) = 2.61 W/kg SAR(1 g) = 0.983 mW/g; SAR(10 g) = 0.367 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.16 mW/g

Date/Time: 7/31/2007 7:37:47 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2412 MHz; σ = 1.9 mho/m; εr = 53.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Up - g mode L ch/Area Scan (6x5x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.762 mW/g LCD Up - g mode L ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 19.9 V/m; Power Drift = 0.135 dB Peak SAR (extrapolated) = 2.47 W/kg SAR(1 g) = 0.973 mW/g; SAR(10 g) = 0.370 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.16 mW/g

Date/Time: 7/31/2007 7:06:48 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 2 mho/m; εr = 54; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Up - g mode M ch/Area Scan (6x5x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.834 mW/g LCD Up - g mode M ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 20.1 V/m; Power Drift = 0.137 dB Peak SAR (extrapolated) = 3.04 W/kg SAR(1 g) = 1.13 mW/g; SAR(10 g) = 0.417 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.31 mW/g

Date/Time: 7/31/2007 8:19:48 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.99 mho/m; εr = 54.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Up - g mode H ch/Area Scan (6x5x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.635 mW/g LCD Up - g mode H ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 17.8 V/m; Power Drift = 0.128 dB Peak SAR (extrapolated) = 2.36 W/kg SAR(1 g) = 0.880 mW/g; SAR(10 g) = 0.328 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.986 mW/g

Date/Time: 7/30/2007 7:20:58 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 2.01 mho/m; εr = 54; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Down - b mode M ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.690 mW/g LCD Down - b mode M ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 1.81 V/m; Power Drift = 0.175 dB Peak SAR (extrapolated) = 1.49 W/kg SAR(1 g) = 0.563 mW/g; SAR(10 g) = 0.243 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.620 mW/g

Date/Time: 7/30/2007 7:48:56 PM Test Laboratory: Compliance Certification Services Body DUT: Wi Fi 802.11 b/g; Type: N/A;Serial: 9C7260RADV1 Communication System: 802.11bg;Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 2.01 mho/m; εr = 54; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.14, 6.14, 6.14); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 LCD Down - g mode M ch/Area Scan (5x6x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.552 mW/g LCD Down - g mode M ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 16.8 V/m; Power Drift = 0.144 dB Peak SAR (extrapolated) = 1.22 W/kg SAR(1 g) = 0.485 mW/g; SAR(10 g) = 0.205 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.619 mW/g


Document Created: 2007-07-31 20:55:39
Document Modified: 2007-07-31 20:55:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC