SAR Calibration Certificate for Dipoles 2of2

FCC ID: BCG-E2694A

RF Exposure Info

Download: PDF
FCCID_2049448

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Object Calibration procedure(s) Calibration date: This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 05—Oct—11 (No. 217—01451) Oct—12 Power sensor HP 8481A US37292783 05—Oct—11 (No. 217—01451) Oct—12 Reference 20 dB Attenuator SN: 5058 (20k) 27—Mar—12 (No. 217—01530) Apr—13 Type—N mismatch combination SN: 5047.2 / 06327 27—Mar—12 (No. 217—01533) Apr—13 Reference Probe EX3DV4 SN: 3503 30—Dec—11 (No. EX3—3503_Dect1) Dec—12 DAE4 SN: 601 27—Jun—12 (No. DAE4—601_Jun12) Jun—13 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—11) In house check: Oct—13 RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct11) _ _ in house check: Oct—13 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—11) In house check: Oct—12 Name Function Signature Calibrated by: Approved by: Issued: September 18, 2012 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1003_Sep12 Page 1 of 13

& & Calibration Laboratory of \\\H'u/,l \&_//// Schweizerischer Kalibrierdienst Schmid & Partner §E°\\-/E j HEE/';, Service suisse d‘étalonnage Engineering AG Tnz Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland C ///\\\ \ Swiss Calibration Service * Alubuts® * Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEC 62209—2, "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body—Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures"; Part 2: "Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters", March 2010 b) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: c) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed pomt No uncertainty required. SAR measured: SAR measured at the stated antenna mput power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1003_Sep12 Page 2 of 13

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS5 V52.8.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5200 MHz + 1 MHz Frequency 5600 MHz + 1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 35.1 +6 % 4.48 mho/m + 6 % Head TSL temperature change during test <0.5 °C h=—— ———— SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.70 mW / g SAR for nominal Head TSL parameters normalized to 1W 76.5 mW /g * 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.21 mW /g SAR for nominal Head TSL parameters normalized to 1W 21.9 mW /g + 19.5 % (k=2) Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 34.5 +6 % 4.86 mho/m +6 % Head TSL temperature change during test <0.5 °C ———~ ———— SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.34 mW / g SAR for nominal Head TSL parameters normalized to 1W 82.8 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.38 mW / g SAR for nominal Head TSL parameters normalized to 1W 23.6 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Sep12 Page 3 of 13

Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.2 16 % 5.06 mho/m +6 % Head TSL temperature change during test <0.5 °C ———— SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.75 mW / g SAR for nominal Head TSL parameters normalized to 1W 76.9 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.22 mW / g SAR for nominal Head TSL parameters normalized to 1W 22.0 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Sep12 Page 4 of 13

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 47.0 #6 % 5.43 mho/im +6 % Body TSL temperature change during test <0.5 °C a——— ———— SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.54 mW / g SAR for nominal Body TSL parameters normalized to 1W 74.8 mW / g +19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.11 mW / g SAR for nominal Body TSL parameters normalized to 1W 20.9 mW / g + 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.3 # 6 % 5.93 mho/m +6 % Body TSL temperature change during test <0.5 °C he—= ———— SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.97 mW / g SAR for nominal Body TSL parameters normalized to 1W 79.0 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.22 mW / g SAR for nominal Body TSL parameters normalized to 1W 22.0 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Sep12 Page 5 of 13

Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 45.9 +6 % 6.20 mho/m +6 % Body TSL temperature change during test <0.5 °C ———— a=—— SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.77 mW !g SAR for nominal Body TSL parameters normalized to 1W 77.0 mW / g +# 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.17 mW / g SAR for nominal Body TSL parameters normalized to 1W 21.4 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1003_Sep12 Page 6 of 13

Appendix Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 49.8 Q — 8.9 |Q Return Loss —21.0 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 55.4 Q — 2.1 jQ Return Loss . ~25.2 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 59.5 Q — 3.5 |Q Return Loss — 20.7 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 49.5 Q — 7.3 |Q Return Loss —22.7 dB Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 55.3 Q —1.2 jQ Return Loss — 25.8 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 59.9 0 — 2.0 j|Q Return Loss —20.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.156 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the— second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on July 08, 2003 Certificate No: D5GHzV2—1003_Sep12 Page 7 of 13

DASY5 Validation Report for Head TSL Date: 17.09.2012 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 5GHz; Type: DSGHzV2; Serial: D5GHzV2 — SN: 1003 Communication System: CW; Frequency: 5200 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: £ = 5200 MHz; 0 = 4.48 mho/m; &, = 35.1; p = 1000 kg/m3 , Medium parameters used: £ = 5600 MHz; 0 = 4.86 mho/m; s = 34.5; p = 1000 kg/m3 , Medium parameters used: £ = 5800 MHz; 6 = 5.06 mho/m; &, = 34.2; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(5.41, 5.41, 5.41); Calibrated: 30.12.2011, ConvF(4.76, 4.76, 4.76);, Calibrated: 30.12.2011, ConvF(4.81, 4.81, 4.81); Calibrated: 30.12.2011; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAFE4 Sn601; Calibrated: 27.06.2012 * Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 & DASY52 52.8.2(969); SEMCAD X 14.6.6(6824) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.615 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 27.968 mW/g SAR(1 g) =7.7 mW/g; SAR(10 g) = 2.21 mW/g Maximum value of SAR (measured) = 17.6 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.657 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 32.631 mW/g SAR(1 g) = 8.34 mW/g; SAR(10 g) = 2.38 mW/g Maximumvalue of SAR (measured) = 19.6 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 61.235 V/m; Power Drift = 0.07 dB Peak SAR ({extrapolated) = 31.596 mW/g SAR(1 g) =7.75 mW/g; SAR(10 g) = 2.22 mW/g Maximum value of SAR (measured) = 18.6 W/kg Certificate No: D5GHzV2—1003_Sep12 Page 8 of 13

0 dB = 18.6 W/kg = 25.39 dB W/kg Certificate No: D5GHzV2—1003_Sep12 Page 9 of 13

Impedance Measurement Plot for Head TSL 17 Sep 2012 11122137 CHI) s1i1i 1 UOFS 1:149.836 a —8.9238 a 3.4298 pF 5 200.000 dan MHz _-—*”"'"”g"'”“‘”»—\.._w\h %# CH1 Markers Oe 1 3 55,.432 a —~2.05988 a Cor 5.60000 GHz 4 59.451 o —3.3156 m 5.89000 GHz A 169 HId CH2Z CH2 Markers Cor 3—25,180 dB 5.560000 6Hz 4:—28.714 dB 5.$9590900 GHz Axe 155 H1d START 5 9800.000 000 MHz STOP 6 090.000 G00 MHz Certificate No: D5GHzV2—1003_Sep12 Page 10 of 13

DASY5 Validation Report for Body TSL Date: 18.09.2012 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: DSGHzV2; Serial: D5SGHzV2 — SN: 1003 Communication System: CW; Frequency: 5200 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; o = 5.43 mho/m; &, = 47; p = 1000 kg/m‘ , Medium parameters used: £= 5600 MHz; 6 = 5.93 mho/m; s, = 46.3; p = 1000 kg/m3 , Medium parameters used: £ = 5800 MHz; o = 6.2 mho/m; s, = 45.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY52 Configuration: * Probe: EX3DV4 — SN3503; ConvF(4.91, 4.91, 4.91); Calibrated: 30.12.2011, ConvF(4.22, 4.22, 4.22);, Calibrated: 30.12.2011, ConvF(4.38, 4.38, 4.38); Calibrated: 30.12.2011; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAF4 Sn601; Calibrated: 27.06.2012 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP5OAA; Serial: 1002 e DASY52 52.8.2(969);, SEMCAD X 14.6.6(6824) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.615 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 29.969 mW/g SAR(1 g) = 7.54 mW/g; SAR(10 g) = 2.11 mW/g Maximum value of SAR (measured) = 18.1 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5600 MHz 2/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 57.663 V/m;, Power Drift = —0.05 dB Peak SAR (extrapolated) = 35.321 mW/g SAR(1 g) = 7.97 mW/g; SAR(10 g) = 2.22 mW/g Maximum value of SAR (measured) = 19.9 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 55.888 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 36.028 mW/g SAR(1 g) = 7.77 mW/g; SAR(10 g) = 2.17 mW/g Maximum value of SAR (measured) = 19.6 W/kg Certificate No: D5GHzV2—1003_Sep12 Page 11 of 13

0 dB = 19.6 W/kg = 25.85 dB W/kg Certificate No: D5GHzV2—1003_Sep12 Page 12 of 13

Impedance Measurement Plot for Body TSL 18 Sep 2012 11:23:30 §14100o4 UoFrs 1:49.527 a —P.3B145 o 441844 pF 5 200.000 000 MHz wpo & _ ~_ CH1 Markers De l 3 SS5.277 a —1.23109 a Cor 5.60000 6Hz 4 594.918 a —2.0352 a 5.899000 GHz Pz 16 8 H1 d CH2 CH2 Markers 3:—25.7 78 dB Cor 5.60000 GHz 4:—29.714 dB 580900 GHz Avg 16 H1 d START 5 000.000 gdo MHz STOP 6 $08.000 080 MHz Certificate No: D5GHzV2—1003_Sep12 Page 13 of 13

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Object Calibration procedure(s) Calibration date: This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. Alt calibrations have been conducted in the closed laboratory facility: environment temperature(22 + 3)°Cand humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 05—Oct—11 (No. 217—01451) Oct—12 Power sensor HP 8481A US37292783 05—Oct—11 (No. 217—01451) Oct—12 Reference 20 dB Attenuator SN: 5058 (20k) 27—Mar—12 (No. 217—01530) Apr—13 Type—N mismatch combination SN: 5047.2 / 06327 27—Mar—12 (No. 217—01533) Apr—13 Reference Probe EX3DV4 SN: 3503 30—Dec—11 (No. EX3—3503_Dect1) Dec—12 DAE4 SN: 601 27—Jun—12 (No. DAE4—601_Jun12) Jun—13 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—0ct—02 (in house check Oct—11) In house check: Oct—13 RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—11) in house check: Oct—13 Network Analyzer HP 8753E US37390585 $4206 18—0ct—01 (in house check Oct—11) in house check: Oct—12 Name Function Signature Calibrated by: Approved by: Issued: October 9, 2012 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1138_Oct12 Page 1 of 13

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEC 62209—2, "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body—Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures"; Part 2: "Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters", March 2010 b) Federal Communications Commission Office of Engineering & Technology (FCC OET}), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: c) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1138_Oct12 Page 2 of 13

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction} 5200 MHz + 1 MHz Frequency 5500 MHz + 1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.1 +6 % 4.48 mho/im x 6 % Head TSL temperature change during test <0.5 °C Ca—— ~——— SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.00 mW / g SAR for nominal Head TSL parameters normalized to 1W 79.5 mW /g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.30 mWw / g SAR for nominal Head TSL parameters normalized to 1W 22.8 mW /g + 19.5 % (k=2) Head TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.6 4.96 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 34.6 1 6 % 4.76 mho/m * 6 % Head TSL temperature change during test <0.5 °C _——— ~——— SAR result with Head TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.43 mW / g SAR for nominal Head TSL parameters normalized to 1W 83.6 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.40 mWw / g SAR for nominal Head TSL parameters normalized to 1W 23.8 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Oct12 Page 3 of 13

Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.2 +6 % ©5.06 mho/m +6 % Head TSL temperature change during test <0.5 °C ==—— SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.94 mW / g SAR for nominal Head TSL parameters normalized to 1W 78.7 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.26 mW / g SAR for nominal Head TSL parameters normalized to 1W 22.4 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Oct12 Page 4 of 13

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.0 +6 % 5.30 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.38 mW / g SAR for nominal Body TSL parameters normalized to 1W 73.2 mW / g * 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.06 mW / g SAR for nominal Body TSL parameters normalized to 1W 20.4 mW / g * 19.5 % (k=2) Body TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.6 5.65 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.4 +# 6 % 5.80 mho/m +6 % Body TSL temperature change during test <0.5 °C ———— SAR result with Body TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.86 mW / g SAR for nominal Body TSL parameters normalized to 1W 77.9 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.19 mW / g SAR for nominal Body TSL parameters normalized to 1W 21.7 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Oct12 Page 5 of 13

Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 45.9 + 6 % 6.20 mho/m +6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.34 mW / g SAR for nominal Body TSL parameters normalized to 1W 72.8 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.03 mW /g SAR for nominal Body TSL parameters normalized to 1W 20.1 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1138_Oct12 Page 6 of 13

Appendix Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 49.7 O — 7.4 jQ Return Loss — 22.6 dB Antenna Parameters with Head TSL at 5500 MHz Impedance, transformed to feed point 52.3 Q — 4.1 j|Q Return Loss — 26.7 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 53.8 Q — 2.6 |Q Return Loss — 27.0 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 50.0 Q — 5.7 jQ Return Loss — 24.9 dB Antenna Parameters with Body TSL at 5500 MHz Impedance, transformed to feed point 52.2 Q — 1.9 |Q Return Loss — 30.9 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 55.8 Q — 0.2 |Q Return Loss — 25.2 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.203 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on May 07, 2012 Certificate No: D5GHzV2—1138_Oct12 Page 7 of 13

DASY5 Validation Report for Head TSL Date: 09.10.2012 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 5GHz; Type: DSGHzV2; Serial: D5SGHzV2 — SN: 1138 Communication System: CW; Frequency: 5200 MHz, Frequency: 5500 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 4.48 mho/m; s = 35.1; p = 1000 kg/m3 , Medium parameters used: £ = 5500 MHz; 0 = 4.76 mho/m; &, = 34.6; p = 1000 kg/m" , Medium parameters used: £ = 5800 MHz:; o = 5.06 mho/m; &, = 34.2; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(5.41, 5.41, 5.41); Calibrated: 30.12.2011, ConvF(4.91, 4.91, 4.91); Calibrated: 30.12.2011, ConvF(4.81, 4.81, 4.81); Calibrated: 30.12.2011; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAFE4 Sn601; Calibrated: 27.06.2012 * Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5O0AA; Serial: 1001 e DASY52 52.8.2(969); SEMCAD X 14.6.6(6824) Dipole Calibration for Head Tissue/Pin=100mwW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.361 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 29.438 mW/g SAR(1 g) = 8 mW/g; SAR(10 g) = 2.3 mW/g Maximum value of SAR (measured) = 18.6 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.450 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 33.265 mW/g SAR(1 g) = 8.43 mW/g; SAR(10 g) = 2.4 mW/g Maximum value of SAR (measured) = 20.3 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 60.963 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 33.069 mW/g SAR(1 g) = 7.94 mW/g; SAR(10 g) = 2.26 mW/g Maximum value of SAR (measured) = 19.5 W/kg Certificate No: DSGHzV2—1138_Oct12 Page 8 of 13

0 dB = 19.5 W/kg = 25.80 dB W/kg Certificate No: D5GHzV2—1138_Oct12 i Page 9 of 13

Impedance Measurement Plot for Head TSL 2 Oct 2012 10:148:}°22 CHJ s44 i uors 11 49.666 a —7.36720 41545 pF Cmm in 5 200,.000 900 MH=z 2e C CH1 Mark ers De 1 2 92.2S2 a —~4.1445 & Cor 5.59000 GHz # $3.924 o ~2.5 835 a 5.$99990 GHz fivg 16 H1 d CHZ CH2 Markers Cor 21—26.7 29 dB 5.509000 GHz 3:~27.023 dB 5.800890 BHz lapa 16 H1d START 5 ©900.008 P09 MHz STOP 6 #90.000 00b MHz Certificate No: D5GHzV2—1138_Oct12 Page 10 of 13

DASY5 Validation Report for Body TSL Date: 08.10.2012 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 5GHz; Type: DSGHZVZ; Serial: DSGHzV2 — SN: 1138 Communication System: CW; Frequency: 5200 MHz, Frequency: 5500 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 5.3 mho/m; & = 47; p = 1000 kg/rn3 , Medium parameters used: £ = 5500 MHz; 0 = 5.8 mho/m; &, = 46.4; p = 1000 kg/m" , Medium parameters used: f = 5800 MHz; 0 = 6.2 mho/m; &, = 45.9; p = 1000 kg/m" Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(4.91, 4.91, 4.91); Calibrated: 30.12.2011, ConvF(4.43, 4.43, 4.43); Calibrated: 30.12.2011, ConvF(4.38, 4.38, 4.38); Calibrated: 30.12.2011; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAF4 Sn601; Calibrated: 27.06.2012 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP5O0AA; Serial: 1002 * DASY52 52.8.2(969); SEMCAD X 14.6.6(6824) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.068 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 28.807 mW/g SAR(1 g) =7.38 mW/g; SAR(10 g) = 2.06 mW/g Maximum value of SAR (measured) = 17.3 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 57.994 V/m;, Power Drift = —0.04 dB Peak SAR (extrapolated) = 33.377 mW/g SAR(1 g) = 7.86 mW/g; SAR(10 g) = 2.19 mW/g Maximum value of SAR (measured) = 19.1 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 54.412 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 33.948 mW/g SAR(1 g) =7.34 mW/g; SAR(10 g) = 2.03 mW/g Maximum value of SAR (measured) = 18.5 W/kg Certificate No: D5GHzV2—1138_Oct12 Page 11 of 13

0 dB = 18.5 W/kg = 25.34 dB W/kg Certificate No: D5GHzV2—1138_Oct12 ~ Page 12 of 13

Impedance Measurement Plot for Body TSL 8 Oct 2012 1§5:29:11i S11 1 U OFS 1159,043 a —SF246 a 5.3465 pF 5 200.900 900 MHz %# CH1 Markers De 1 2A §2.219 a —1.8828 a Cor 5.50800 GHz # 55.8B1 o ~1598.290 m« 5.89000 GHz Fiv :I_E-9| HLId CH2Z CH2 Mark ers 7:—30.994 dB Cor 5.59000 GHz 3:—25.214 dB 5.880000 GHz Frv 16" H1d START 5 900.000 000 MHz STOP 6 000.000 900 MHz Certificate No: D5GHzV2—1138_Oct12 Page 13 of 13


Document Created: 2013-08-13 13:02:48
Document Modified: 2013-08-13 13:02:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC