SAR Plots for Bluetooth

FCC ID: BCG-E2430A

RF Exposure Info

Download: PDF
FCCID_1544493

Date/Time: 8/10/2011 7:13:48 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_USI DUT: Apple; Type: NA; Serial: NA Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.99 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.9, 6.9, 6.9); Calibrated: 12/13/2010 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1259; Calibrated: 5/3/2011 - Phantom: SAM B (Twin); Type: SAM B; Serial: TP-105 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Front side_M-ch/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.032 mW/g Front side_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.70 V/m; Power Drift = -0.106 dB Peak SAR (extrapolated) = 0.047 W/kg SAR(1 g) = 0.023 mW/g; SAR(10 g) = 0.011 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.032 mW/g 0 dB = 0.032mW/g

Date/Time: 8/10/2011 7:35:32 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_USI DUT: Apple; Type: NA; Serial: NA Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.99 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.9, 6.9, 6.9); Calibrated: 12/13/2010 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1259; Calibrated: 5/3/2011 - Phantom: SAM B (Twin); Type: SAM B; Serial: TP-105 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Back side_M-ch/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.070 mW/g Back side_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.40 V/m; Power Drift = 0.231 dB Peak SAR (extrapolated) = 0.129 W/kg SAR(1 g) = 0.052 mW/g; SAR(10 g) = 0.021 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.075 mW/g 0 dB = 0.075mW/g

Date/Time: 8/10/2011 7:55:56 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_Murata DUT: Apple; Type: NA; Serial: NA Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.99 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.9, 6.9, 6.9); Calibrated: 12/13/2010 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1259; Calibrated: 5/3/2011 - Phantom: SAM B (Twin); Type: SAM B; Serial: TP-105 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Front side_M-ch/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.032 mW/g Front side_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.91 V/m; Power Drift = -0.146 dB Peak SAR (extrapolated) = 0.049 W/kg SAR(1 g) = 0.024 mW/g; SAR(10 g) = 0.00944 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.033 mW/g 0 dB = 0.033mW/g

Date/Time: 8/10/2011 8:57:07 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_Murata DUT: Apple; Type: NA; Serial: NA Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.99 mho/m; εr = 54.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.9, 6.9, 6.9); Calibrated: 12/13/2010 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1259; Calibrated: 5/3/2011 - Phantom: SAM B (Twin); Type: SAM B; Serial: TP-105 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Back side_M-ch/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.083 mW/g Back side_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.46 V/m; Power Drift = 0.195 dB Peak SAR (extrapolated) = 0.136 W/kg SAR(1 g) = 0.055 mW/g; SAR(10 g) = 0.023 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.077 mW/g 0 dB = 0.077mW/g

Date/Time: 8/10/2011 9:16:47 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_Murata DUT: Apple; Type: NA; Serial: NA Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Back side_M-ch/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.051 mW/g

Date/Time: 8/19/2011 7:27:07 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_Semco Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.86 mho/m; εr = 38.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.69, 6.69, 6.69); Calibrated: 12/13/2010 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1259; Calibrated: 5/3/2011 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: 1017 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Front side_M-ch/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.031 mW/g Front side_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.80 V/m; Power Drift = 0.019 dB Peak SAR (extrapolated) = 0.048 W/kg SAR(1 g) = 0.024 mW/g; SAR(10 g) = 0.011 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.033 mW/g 0 dB = 0.033mW/g

Date/Time: 8/19/2011 7:45:43 PM Test Laboratory: UL CCS SAR Lab D Bluetooth_Body_Semco Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.3 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.86 mho/m; εr = 38.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.69, 6.69, 6.69); Calibrated: 12/13/2010 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1259; Calibrated: 5/3/2011 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: 1017 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Back side_M-ch/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.057 mW/g Back side_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.77 V/m; Power Drift = 0.169 dB Peak SAR (extrapolated) = 0.091 W/kg SAR(1 g) = 0.043 mW/g; SAR(10 g) = 0.020 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.061 mW/g 0 dB = 0.061mW/g


Document Created: 2011-08-30 17:16:10
Document Modified: 2011-08-30 17:16:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC