RF Exposure

FCC ID: BCE-OTE18

RF Exposure Info

Download: PDF
FCCID_2254114

MDE_GNNET_1406_FCC_RFEX RF Exposure Considerations for FCC ID: BCE-OTE18 Per FCC KDB 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by the equation below: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] If result of Eq.1 is less than or equal to the exemption limits below, then corresponding SAR test is not required. SAR Test Configuration Exemption limit 1-g SAR Result of Eq.1 ≤ 3.0 10-g extremity SAR Result of Eq.1 ≤ 7.5 where; f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation. The result is rounded to one decimal place for comparison. The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. For our device, the parameters for consideration are as follows: Channel Frequency Maximum source-based Minimum Result of Limit for Limit for Verdict (GHz) time averaged separation Eq. 1 1-g SAR 10-g conducted output power distance (mm) extremity including tune-up SAR tolerance (mW) Exempt 0 2.402 8.30 5mm 2.6 3.0 7.5 from SAR Exempt 39 2.441 8.46 5mm 2.6 3.0 7.5 from SAR Exempt 78 2.480 8.30 5mm 2.6 3.0 7.5 from SAR Conclusion: Therefore our device complies with FCC’s RF radiation exposure limits for general population without SAR evaluation.


Document Created: 2014-04-23 14:38:26
Document Modified: 2014-04-23 14:38:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC