TestRep1

FCC ID: BCE-HS810

Test Report

Download: PDF
FCCID_340569

ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH TEST - REPORT FCC RULES PART 15 / SUBPART C FCC ID: BCE-HS810 Test report no.: G0M20306-7948-P-15 FCC ELECTRONIC TECHNOLOGY SYSTEMS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN DR. GENZ GMBH PHONE +49-33631-888 00 FAX +49-33631-888 66

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Test Procedure 3 Test Results ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 1 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Futhermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample posseses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extractes from the report requires the prior written approval of the ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH. Tester: 07.07.2003 N. Kaspar Date ETS-Lab. Name Signature Technical responsibility for area of testing: 07.07.2003 Dr. Genz Date ETS Name Signature ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 2 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1.2 Testing laboratory 1.2.1 Location ELECTRONIC TECHNOLOGY SYSTEM DR. GENZ GMBH (ETS) Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 660 1.2.2 Details of accreditation status ACCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: TTI-P-G 126/96 ACCREDITED COMPETENT BODY DAR-REGISTRATION NUMBER: BPT-ZE-026/96 FCC FILED TEST LABORATORY REG. NO. 96970 BLUETOOTH QUALIFICATION TEST FACILITY (BQTF) ACCREDITED BY BLUETOOTH QUALIFICATION REVIEW BOARD INDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED Certificate Number 1983-01 1.3 Details of approval holder Name : GN Netcom A/S Street : Metalbuen 66 Town : DK-2750 Ballerup Country : Denmark Telephone : +45 44 20 87 42 Fax : +45 44 20 87 49 Contact : Mr. Jorn B. Rasmussen Telephone : +45 44 20 87 42 ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 3 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1.4 Application details Date of receipt of application : 23.06.2003 Date of receipt of test item : 23.06.2003 Date of test : 23.06.2003-26.06.2003 1.5 Test item Description of test item : Bluetooth Headset Type identification : Motorola HS810 Serial number : without Photos : See Appendix A Technical data Frequency band : 2.4GHz – 2.4835GHz Frequency ( ch A) : 2.402 GHz Frequency (ch B) : 2.441 GHz Frequency (ch C) : 2.480 GHz Transmitter Unom Vnom Power (ch A) : Conducted: 1,73 dBm Radiated: 6,51 dBm Power (ch B) : Conducted: 1,72 dBm Radiated: 4,68 dBm Power (ch C) : Conducted: 1,50 dBm Radiated: 3,89 dBm Power supply : 3,7 V DC Operating mode : duplex Type of modulation : FHSS Antenna gain : 0 dBi ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 4 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Manufacturer: (if applicable) Name : Street : Town : Country : Additional information: The test sample is designed as Bluetooth device. Its pseudorandom hopping scheme, authentication, receiver parameters, synchronisation procedure and other parameters are determined by Bluetooth Core Specification. According to attached declaration of manufacturer this device don’t work in master inquiry mode. So we have only one frequency hopping system and the hopping sequence of the master inquiry mode is not very feed. ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 5 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1.6 Test standards Technical standard : FCC RULES PART 15 / SUBPART C § 15.247 2 Technical test 2.1 Summary of test results No deviations from the technical specification(s) were ascertained in the course ý of the tests performed. or The deviations as specified in 2.5 were ascertained in the course of the tests ¨ performed. 2.2 Test environment Temperature : 23oC Relative humidity content : 20 ... 75 % Air pressure : 86 ... 103 kPa Details of power supply : 3,7 V DC Extrem conditions parameters: : test voltage - extreme min.: -- V max: -- V ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 6 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 2.3 Test equipment utilized No. Measurement device: Type: Manufacturer: ETS 0001 Test receiver ESHS 10 Rohde&Schwarz ETS 0002 Test receiver ESVP Rohde&Schwarz ETS 0003 Test receiver ESVS 10 Rohde&Schwarz ETS 0004 Spektrum- and Network-Analyzer FSMS 26 Rohde&Schwarz ETS 0005 Test receiver SMV 11 MEB ETS 0006 Test receiver system SME 12 MEB ETS 0007 Spectrum analyzer PSA-65A Avcom ETS 0008 Antenna Loop antenna Siemens ETS 0009 Antenna Loop antenna MEB ETS 0010 Antenna Loop antenna MEB ETS 0011 Antenna van Veen/ Frame ETS ETS 0012 Antenna HK 116 Rohde&Schwarz ETS 0013 Antenna HL 223 Rohde&Schwarz ETS 0014 Antenna HL 025 Rohde&Schwarz ETS 0015 Antenna HL 025 Rohde&Schwarz ETS 0016 Antenna VHAP Schwarzbeck ETS 0017 Antenna VHAP Schwarzbeck ETS 0018 Antenna UHAP Schwarzbeck ETS 0019 Antenna UHAP Schwarzbeck ETS 0020 Antenna DP 21 MEB ETS 0021 Antenna DP 3 MEB ETS 0022 Antenna SAS-200/ 521 A.H. Systeme / USA ETS 0023 Antenna DP 1 MEB ETS 0024 Antenna mast AF 2 MEB ETS 0025 Antenna mast AF 2 MEB ETS 0026 Tripod Heinrich Deisel ETS 0027 Tripod Heinrich Deisel ETS 0028 Tripod STA 2 C. Lorenz AG ETS 0029 Tripod Berlebach ETS 0030 Turn table TT 1 ETS ETS 0031 Turn table DS 412 Heinrich Deisel ETS 0032 Controller HD 050 Heinrich Deisel ETS 0033 RF generator SMG Rohde&Schwarz ETS 0034 RF generator/ Amplifier SMLR Rohde&Schwarz ETS 0035 RF generator/ Amplifier SMLM Rohde&Schwarz ETS 0036 RF amplifier 10W 1000AM2 Amplifier Research ETS 0037 RF amplifier 50W 1000 Amplifier Research ETS 0038 RF amplifier 150L Amplifier Research ETS 0039 Absorbing clamp MDS 21 Rohde&Schwarz ETS 0040 Artifical mains ESH3-Z5 Rohde&Schwarz ETS 0041 Artifical mains ESH3-Z4 Rohde&Schwarz ETS 0042 Artifical mains ESH3-Z6 Rohde&Schwarz ETS 0043 Artifical mains NNB 11 MEB ETS 0044 Artifical mains NNB 111 MEB ETS 0045 Stripe line IEC 801-3 ETS ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 7 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH No. Measurement device: Type: Manufacturer: ETS 0046 Power supply LTS 006 RFT ETS 0047 Power supply TG 20/ 1 Statron ETS 0048 Power supply TG 20/ 1 Statron ETS 0049 Power supply T 102 TPW ETS 0050 Power supply T 101b TPW ETS 0051 Oscilloscope TDS 640A Tektronic ETS 0052 Audio analyzer UPA 4 Rohde&Schwarz ETS 0053 ECAT Controlcentre Keytek/ EMV ETS 0054 EFT simulator Keytek/ EMV ETS 0055 Modul network coupler Keytek/ EMV ETS 0056 Blank plug-in Keytek/ EMV ETS 0057 Module SURGE with DC coupler Keytek/ EMV ETS 0058 Capacitive coupling clamp Keytek/ EMV ETS 0059 Kikusui amplfier PCR 2000L Keytek/ EMV ETS 0060 Xitron power analyzer Keytek/ EMV ETS 0061 Power/ Arb (Harm., Ramp) Keytek/ EMV ETS 0062 Reference impedance Keytek/ EMV ETS 0063 Blank plug-in Keytek/ EMV ETS 0064 Filter system IEC 1000-4-6 Keytek/ EMV ETS 0065 ESD-generator minizap Keytek/ EMV ETS 0066 EM Injection Clamp FCC/ EMV ETS 0067 Calibration Fixture IEC 801-2031 CF FCC/ EMV ETS 0068 Filter system IEC 1000-4-6 CDN FCC/ EMV ETS 0069 EM Radiation Monitor EMR-20 Wandel&Goltermann ETS 0070 PC Transfer set EMR-20 EMR-20 Wandel&Goltermann ETS 0071 Videocamera system KMB012 Kocom ETS 0072 Interphone system JS-1400 Jiuh Sheng ETS 0073 Audio noise meter GSM 2 MKD/ RFT ETS 0074 RF milivoltmeter QRV 2 MKD/ RFT ETS 0075 NF generator GF 22 Präcitronic ETS 0076 Feeding bridge A SBA 1000 ESP ETS 0077 Audio/ Video Filter AV 55020 ETS ETS 0078 LCR meter SR 720 SRS ETS 0079 Functional generator MX-2020 Maxcom ETS 0080 EMI Software ES-K1 Rohde&Schwarz ETS 0081 EMI Software ES-K10 Rohde&Schwarz ETS 0082 PC Novell network system Novell Esotronic ETS 0083 Apple computer sstem Performa 630 Macintosh ETS 0084 Processcontroler PSA 15 Rohde&Schwarz ETS 0085 Shielded room SR 1 Frankonia ETS 0086 Anechoic chamber AC 1 Frankonia ETS 0087 Climatic cell HC 4033 Heraeus ETS 0088 Colour TV pattern generator PM 5518-TX VPS Philips ETS 0089 Radiocommunication tester CMS 54 Rohde&Schwarz ETS 0090 DECT type approval CTR06 TS 8930 Rohde&Schwarz ETS 0091 RF signal generator SME 03 Rohde&Schwarz ETS 0092 DM-Coder SME-B11 Rohde&Schwarz ETS 0093 Pulse Modulator SM-B8 Rohde&Schwarz ETS 0094 Rearpanel connectors SME-B19 Rohde&Schwarz ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 8 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH No. Measurement device: Type: Manufacturer: ETS 0095 DECT system controller PSMD Rohde&Schwarz ETS 0096 DECT Signalling unit PSMD-B11 Rohde&Schwarz ETS 0097 Rack, 19", 36 HU TS 89RA Rohde&Schwarz ETS 0098 System engineering and software CS 893BE Rohde&Schwarz ETS 0099 Extension unit for basic version TS 8930B Rohde&Schwarz ETS 0100 RF signal generator SME-06 Rohde&Schwarz ETS 0101 DM-Coder SME-B11 Rohde&Schwarz ETS 0102 Pulse modulator SM-B8 Rohde&Schwarz ETS 0103 Pulse generator SM-B4 Rohde&Schwarz ETS 0104 Rearpanel connectors SME-B19 Rohde&Schwarz ETS 0105 High power synthesizer/ sweeper SMP 22 Rohde&Schwarz ETS 0106 Frequency extension SMP-B11 Rohde&Schwarz ETS 0107 RF attenuator for SMP 22 SMP-B15 Rohde&Schwarz ETS 0108 DECT protocol tester TBR 22 TS 1220 Rohde&Schwarz ETS 0109 Process controller PSM 2 Rohde&Schwarz ETS 0110 Real time signalling unit PSMD-B2 Rohde&Schwarz ETS 0111 PCM Realtime audio interface for PSMD-B3 Rohde&Schwarz ETS 0112 Synthesizer Module PSMD-B4 Rohde&Schwarz ETS 0113 Keyboard PSA-Z2 Rohde&Schwarz ETS 0114 RF step attenuator RSG Rohde&Schwarz ETS 0115 Glide path ETS ETS 0116 RF Millivoltmeter URV 55 Rohde&Schwarz ETS 0117 Insertion unit URV-Z2 Rohde&Schwarz ETS 0118 Mixer MFC 1000 Avcom ETS 0119 Mixer MFC 2000 Avcom ETS 0120 RF step attenuator TRI-50-20 INCO ETS 0121 Oscilloscope EO 147A Serute ETS 0122 Oscilloscope 5201 Dagatron ETS 0123 RF step attenuator RBU Rohde&Schwarz ETS 0124 Tripod STA 2 Rohde&Schwarz ETS 0125 Small components ETS 0126 Uninterruptable power supply UPS - 1500 Sendon ETS 0127 Uninterruptable power supply UPS - 1000 LC Sendon ETS 0128 Uninterruptable power supply UPS - 1000 Sendon ETS 0129 Uninterruptable power supply UPS - 500 Sendon ETS 0130 Uninterruptable power supply Power saver Sendon ETS 0131 Telephone connection box Systel ETS 0132 Frequency doubler TR-0616 EMG ETS 0133 Probe body P6015 Tektronix ETS 0134 Mains filter MSF Erika Fiedler ETS 0135 Measureing switching point AK 11 RFT ETS 0136 Attenuator 33-6-34 Weinschel ETS 0137 Multimeter YX-360TRA Mastech ETS 0138 Multimeter DT-9410 Diditec ETS 0139 Multimeter ST-9202 Standard ETS 0140 High voltage generator IP 6Wa TPW ETS 0141 Sliding bridge J 573 RFT ETS 0142 Impedanz converter TK 11 RFT ETS 0143 Impedanz converter TK 12 RFT ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 9 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH No. Measurement device: Type: Manufacturer: ETS 0144 ETS 0145 ETS 0146 Probe TK 103 MEB ETS 0147 Active probe ESH2-Z2 Rohde&Schwarz ETS 0148 Test TV 21PT4301/00 Philips ETS 0149 Power divider ZAPD-21 MCL ETS 0150 Switcher HR07-720 Wisi ETS 0151 Interference pulse generator NSG 500C Schaffner ETS 0152 Simulator for Load-Dump-Impulse NSG 506C (I) Schaffner ETS 0153 Simulator for Load-Dump-Impulse NSG 506C (II) Schaffner ETS 0154 Signalgenerator SMG Rohde&Schwarz ETS 0155 Signalgenerator SMG Rohde&Schwarz ETS 0156 Adjacent channel power meter NKS Rohde&Schwarz ETS 0157 TV and Sat-Signalgenerator VTG 700 Grundig ETS 0158 TV and Sat Signalgenerator VTG 700 Grundig ETS 0159 Programmable power supply TOE 8815 Toellner ETS 0160 Protective wire and isolation tester PI 6001 D SPS electronic ETS 0161 Filter system / consumer electronic Fiedler ETS 0162 Acoustic chamber 403-A IAC ETS 0163 Test head BK 4602 Brüel & Kjær ETS 0164 Simulator ear BK 4185 Brüel & Kjær ETS 0165 Simulator mouth BK 4227 Brüel & Kjær ETS 0166 Acoustic calibrator BK 4231 Brüel & Kjær ETS 0167 Communication Analysis System CAS TE I HEAD acoustics ETS 0168 Acoustical test for DECT CTR 10 HEAD acoustics ETS 0169 Measurement - Frontend (analog) MFE III HEAD acoustics ETS 0170 Measurement - Frontend (digital) MFE IV HEAD acoustics ETS 0171 Electronic test cradle TEH HEAD acoustics ETS 0172 Noise generator HNG III.1 HEAD acoustics ETS 0173 Speaker Canton S Pluss HEAD acoustics ETS 0174 Measurement - Frontend line interface MFE V HEAD acoustics ETS 0175 Software Line interface (analog) COPTZV5 HEAD acoustics ETS 0176 Acoustic volt meter COP 4 HEAD acoustics ETS 0177 Feeding bridge B SBA 1000 ESP ETS 0178 Open area test side 30m ETS ETS 0179 Open area test side 30m ETS ETS 0180 Artifical mains NNB01/RFZ ETS ETS 0181 Test pin for protective wire PE 156-i SPS electronic ETS 0182 Power supply MX-9300 Maxcom ETS 0183 Frequency counter MX-9300 Maxcom ETS 0184 Function generator MX-9300 Maxcom ETS 0185 Digital multimeter MX-9300 Maxcom ETS 0186 Power supply DF 1730 WJG ETS 0187 Power suppy TPW/RFT ETS 0188 High voltage generator ETS 0189 Spectrum Analyzer FSEB Rohde&Schwarz ETS 0190 Function generator MX 2020 Maxcom ETS 0191 Sweep function generator 7202 Dagatron ETS 0192 Audio generator 7101 Dagatron ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 10 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH No. Measurement device: Type: Manufacturer: ETS 0193 Vibration table N1-201-M Sandox ETS 0194 Digital multimeter PMM 208 Dagatron ETS 0195 Thermo hygro recorder Amarell ETS 0196 Digital thermometer AK-688 KD ETS 0197 Digital thermometer Prima ETS 0198 Digital thermometer ad 170th ama-digit ETS 0199 Digital thermometer ad 31th ama-digit ETS 0200 Digital thermometer / hygro meter ad 90h ama-digit ETS 0201 Digital thermometer / hygro meter 37950-10 Cole Parmer ETS 0202 Digital thermometer ad 15th ama-digit ETS 0203 Digital thermometer Type K Amarell ETS 0204 Digital thermometer ad 20th ama-digit ETS 0205 High voltage test generator HA 3300 D SPS electronic ETS 0206 High voltage test accessoires HVGZ 312 SPS electronic ETS 0207 Socket-Outlet torque balance F 37.13 PTL ETS 0208 Unjointed Finger probe P 10.05 PTL ETS 0209 Flixible Finger probe P 10.01 PTL ETS 0210 Spring operated impact hammer P 22.50 PTL ETS 0211 Metallic ball F 53.32 PTL ETS 0212 Hazardous live probe P 10.06 PTL ETS 0213 Hazardous live probe P 10.11 PTL ETS 0214 Ball pressure test apparatus T 10.02 PTL ETS 0215 Glow Wire tester T 03.14 PTL ETS 0216 Force indicator 50N P 10.31 PTL ETS 0217 Millivolt meter URV 55 Rohde&Schwarz ETS 0218 RF probe URV5-Z7 Rohde&Schwarz ETS 0219 Power sensor NRV-Z2 Rohde&Schwarz ETS 0220 Insertion unit URV5-Z4 Rohde&Schwarz ETS 0221 ISDN-S0-Analyzer K1403 Siemens ETS 0222 ISDN Protocol Analyser TE965 Tekelec Teleco. ETS 0223 GSM/ PCN/ PCS-Simul. TS8915B Rohde & Schwarz ETS 0224 GSM System Simulator FTA Rohde & Schwarz ETS 0225 SIM Simulator Orga ETS 0226 SIM Editor Orga ETS 0227 Vibration table TIRA vib GenRad ETS 0228 Climatic chamber VT 4010 Vötsch ETS 0229 Radio Commun. Tester CMT 54 Rohde & Schwarz ETS 0230 Radio Commun. Tester CMD 65 Rohde & Schwarz ETS 0231 Testreceiver ESVS 30 Rohde & Schwarz ETS 0232 Radiation test source VSQ 1 MEB ETS 0233 Direction coupler RK 100 MEB ETS 0234 Power meter NRVD Rohde & Schwarz ETS 0235 RF-network-analyser 8752 C Hewlett Packard ETS 0236 RF-amplifier 100A100 Amplifier Research ETS 0237 RF-amplifier 100W1000M1 Amplifier Research ETS 0238 Field strong meter FM 2000 Amplifier Research ETS 0239 Isotr. field probe 40 GHz FP 2080 Kit Amplifier Research ETS 0240 Isotr. field probe 1 GHz FP 2000 Kit Amplifier Research ETS 0241 Pulse Generator 4050 PicoSecond PL ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 11 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH No. Measurement device: Type: Manufacturer: ETS 0242 Harmonics analyser F 41B Fluke ETS 0243 AC-clamp 1000 A 80i 1000s Fluke ETS 0244 Burst generator EFT 200 EM-Test ETS 0245 Load dump generator LD 200 EM-Test ETS 0246 Voltage drop simulator VDS 200 EM-Test ETS 0247 Microsecond generator MPG 200 EM-Test ETS 0248 Switch unit AN 200 EM-Test ETS 0249 Coupling network CNA 200 EM-Test ETS 0250 Coupling clamp ACC EM-Test ETS 0252 System controller PSM 12 Rohde & Schwarz ETS 0253 Spectrum analyser FSIQ Rohde & Schwarz ETS 0254 RF generator SMIQ 03 Rohde & Schwarz ETS 0255 RF generator SMIQ 03 Rohde & Schwarz ETS 0256 RF generator SMP 03 Rohde & Schwarz ETS 0257 Step attenuator RSP Rohde & Schwarz ETS 0258 Rubidium standard RSTU DATUM GmbH ETS 0259 Power meter NRVD Rohde & Schwarz ETS 0260 Power sensor NRVD-Z1 Rohde & Schwarz ETS 0261 Power sensor NRVD-Z1 Rohde & Schwarz ETS 0262 Switching unit SSCU Rohde & Schwarz ETS 0263 Signaling unit Wird ETS 0264 Spectrum analyser F 1048 HAMEG ETS 0265 Loop antenna HFRA 9150 Schwarzbeck ETS 0267 RF signal generator SMT 03 Rohde & Schwarz ETS 0268 RF signal generator SMP 02 Rohde & Schwarz ETS 0270 RF signal generator SMP 04 Rohde & Schwarz ETS 0271 Test receiver ESI 40 Rohde & Schwarz ETS 0272 RF signal generator SME 03 Rohde & Schwarz ETS 0273 RF signal generator SME 03 Rohde & Schwarz ETS 0274 RF signal generator SMY 01 Rohde & Schwarz ETS 0275 Power sensor NRV-Z51 Rohde & Schwarz ETS 0276 Audio analyser UPL Rohde & Schwarz ETS 0277 Power sensor NRV-Z1 Rohde & Schwarz ETS 0278 Power sensor NRV-Z31 Rohde & Schwarz ETS 0279 Step attenuator RSP Rohde & Schwarz ETS 0280 Power meter NRVD Rohde & Schwarz ETS 0281 Spectrum analyser FSM Rohde & Schwarz ETS 0282 RF bridge 86207 A Hewlett Packard ETS 0283 RF bridge 86205 A Hewlett Packard ETS 0284 Field probe 11940 A Hewlett Packard ETS 0285 Field probe 11941 A Hewlett Packard ETS 0286 Limiter 11867 A Hewlett Packard ETS 0287 Test receiver ESHS 10 Rohde & Schwarz ETS 0288 Artifical mains ESH2-Z5 Rohde & Schwarz ETS 0289 Audio generator TAG 101 Troneer ETS 0290 Audio generator TAG 101 Troneer ETS 0291 Loop antenna HFH2-Z2 Rohde & Schwarz ETS 0292 RF generator SMHU Rohde & Schwarz ETS 0293 Artifical mains NNBM 8125 Schwarzbeck ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 12 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH No. Measurement device: Type: Manufacturer: ETS 0294 Biconical antenna HK 116 Rohde & Schwarz ETS 0295 LPD antenna HL 223 Rohde & Schwarz ETS 0296 Oscilloscope TDS 520 A Tektronix ETS 0297 Power pulse generator IGUF 2910 Schwarzbeck ETS 0298 ICO tester TS 1232 Rohde & Schwarz ETS 0299 DECT protocol tester TS 1220 Rohde & Schwarz ETS 0300 RF amplifier 75 A 250 Amplifier Research ETS 0301 Relay switch unit RSU Rohde & Schwarz ETS 0302 Data line CDN CM-I/O CD Keytek ETS 0303 Telecom line CDN CM-TEL CD Keytek ETS 0304 Test receiver ESHS 10 Rohde & Schwarz ETS 0305 Test receiver ESVS 10 Rohde & Schwarz ETS 0306 Function generator HP 33120A Hewlett Packard ETS 0307 Commu. Sign. Analyzer CSA 803 A Tektronix ETS 0308 Spectrum analyzer R 3361A Advantest ETS 0309 Anechoic chamber AC 2 Frankonia ETS 0310 Anechoic chamber AC 3 Frankonia ETS 0311 Anechoic chamber AC 4 Frankonia ETS 0312 Climatic chamber VC 0033 Vötsch ETS 0313 Power sensor NRV-Z51 Rohde & Schwarz ETS 0314 LPD antenna HL 223 Rohde & Schwarz ETS 0315 Biconical antenna HK 116 Rohde & Schwarz ETS 0316 Switcher Hr 07-720 WISI ETS 0317 Switcher Hr 07-720 WISI ETS 0318 Dial pulse/ DTMF tester 210 HE ETS 0319 Opto link GPIB 140 NI ETS 0320 Opto link GPIB 140 NI ETS 0321 RF Millivoltmeter URV 55 Rohde & Schwarz ETS 0322 Insertion unit URV5-Z4 Rohde & Schwarz ETS 0323 DECT portable part Gigaset 1000 SIEMENS ETS 0324 DECT fix part Gigaset 1000 SIEMENS ETS 0325 DECT portable part Philipps ETS 0326 DECT fix part Philipps ETS 0327 Blue Unit V 2.0 Nokia ETS 0328 BT Protocol tester PTW 60 Rohde & Schwarz ETS 0330 Spectrum analyser FSM Rohde & Schwarz ETS 0333 turn table DE 350 Heinrich Deisel ETS 0334 Controller HD 100 Heinrich Deisel ETS 0335 BT Development kit CASIRA CSR ETS 0336 LPD Antenna HL 223 Rohde & Schwarz ETS 0337 Professional Power Amplifier SE-1200 Wharfedale Pro ETS 0338 Coupling network KN002 ETS ETS 0339 Isolating Transformer KN003 ETS ETS 0340 Bluetooth test set TS8960 Rohde & Schwarz ETS 0341 EN 61000-4-8 Test System F-1000-4-8/9/10-L Fisher Custom ETS 0431 AC Mains Adaptor BS5733 Travel Emporium ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 13 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 2.4 Test Procedure POWER LINE CONDUCTED INTERFERENCE: The procedure used was ANSI STANDARD C63.4-2000 using a 50µH LISN (if necessary). Both lines were observed. The bandwidth of the spectrum analyzer was 10 kHz with an appropriate sweep speed. RADIATION INTERFERENCE: The test procedure used was ANSI STANDARD C63.4-2000 using a spectrum analyzer. The bandwidth of the spectrum analyzer was 100 kHz with an appropriate sweep speed. The analyzer was calibrated in dB above a microvolt at the output of the antenna. The resolution bandwidth was the 100 kHz and the video bandwidth was 300 kHz. The ambient temperature of the UUT was 23°C with a humidity of 40 %. FORMULA OF CONVERSION FACTORS: The Field Strength at 3m was established by adding the meter reading of the spectrum analyzer (which is set to read in units of dBµV) to the antenna correction factor supplied by the antenna manufacturer. The antenna correction factors are stated in terms of dB. Example: Freq (MHz) METER READING + ACF + CABLE LOSS (to the receiver) = FS 33 20 dBµV + 10.36 dB + 6 dB = 36.36 dBµV/m @3m ANSI STANDARD C63.4-2000 10.1.7 MEASUREMENT PROCEDURES: The UUT was placed on a table 80 cm high and with dimensions of 1m by 1.5m (non metallic table). The UUT was placed in the center of the table. The table used for radiated measurements is capable of continuous rotation. The spectrum was scanned from 30 MHz to 10th harmonic of the fundamental. Peak readings were taken in three (3) orthogonal planes and the highest readings. Measurements were made by ETS Dr. Genz GmbH at the registered open field test site located at Storkower Str. 38c, 15526 Reichenwalde, Germany. When an emission was found, the table was rotated to produce the maximum signal strength. At this point, the antenna was raised and lowered from 1m to 4m. The antenna was placed in both the horizontal and vertical planes. ANTENNA & GROUND: This unit uses internal antenna. There is no provision for an external antenna (see photo). ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 14 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3 Test results (enclosure) Required Test Test TEST CASE passed failed Peak Output Power ý ý ¨ Equivalent radiated power ý ý ¨ Spurious Emissions radiated - Transmitter operating ý ý ¨ Spurious Emissions conducted - Transmitter operating ¨ ¨ ¨ Carrier Frequency Separation ý ý ¨ Number of Hopping Frequencies ý ý ¨ Time of Occupancy (Dwell Time) ý ý ¨ 20dB Bandwidth ý ý ¨ Band-edge Compliance of RF Emissions ý ý ¨ Conducted Measurement at (AC) Power Line ¨ ¨ ¨ ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 15 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.1 Peak Output Power (transmitter) This measurement applies to equipment with an integral antenna and to equipment with an antenna connector and equipped with an antenna as declared by the applicant. The power was measured with modulation (declared by the applicant). Conducted Power Test conditions Channel A Channel B Channel C [dBm] [dBm] [dBm] Tnom= 23°C Vnom = 3,7 V 1,73 1,72 1,50 Measurement uncertainty < 3 dB Radited Power Test conditions Channel A Channel B Channel C [dBm] [dBm] [dBm] Tnom= 23°C Vnom = 3,7 V 6,51 4,68 3,89 Measurement uncertainty < 3 dB Test Conditions Signal Field strenght TX highest power mode Tnom= 23C°, Vnom = 3,7 V dBµV/m Frequency [MHz] 2402 97,66 Measuremnet uncertainty < 3 dB The diagrams for thr field strenght measurements are included in Appendix C. ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 16 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Maximum Peak Output Power Limits: Frequency Number of hopping channels MHz ³75 ³50 49³25 74³15 902 –928 - 30 dBm 24 dBm 2400-2483.5 MHz 30 dBm - 21 dbm 5725-5850 MHz 30 dBm - In case of employying transmitter antennas having antenna gain >dBi and using fixed poin-to point operation consider §15.247 (b)(4). Test equipment used: ETS 0125, ETS 0340 ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 17 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.2 De facto Equivalent isotropic radiated power Because using an internal antenna there are no deviations from the radiated test results according 3.1. 3.2.1 Transmitter Integral Antenna: At the transmitter the measurement was transacted with the modulation declared by the manufacturer and the maximum available output power of the EUT. In this arrangement the EUT fulfils the requirements of the FCC rules § 15.247, subpart c, section b. This unit uses internal antenna. There is no provision for an external antenna (see photo). 3.3 RF Exposure Compliance Requirements According to Supplement C, Edition 01-01 to OET Bulletin 65, Edition 97-01 this spread spectrum transmitter is categorically excluded from routine environmental evaluation because of the low power level, where there is a high likelihood of compliance with RF exposure standards. The antenna used for this Bluetooth transceiver module must not be co-located or operating in conjunction with any other antenna or transmitter. 3.4 Out of Band Radiated Emissions FCC Rule: 15.247(c) , 15.35 For out of band emissions that are close to or that exceed the 20 dB attenuation requirement described in the specification, radiated measurements were performed at a 3 m separation distance to determine whether these emissions complied with the general radiated emission requirement. Limits: For frequencies below 1GHz : Max. reading – 20 dB 97,66 dBµV/m- 20 dB= 77,66 dBµV/m Guidance on Measurement of FHSS Systems: “If the emission is pulsed, modify the unit for continuos operation , use the settings shown above, then correct the reading by subtracting the peak-average correction factor, derived from the appropriate duty cycle calculation.” Here the correction was added to the limit instead subtracted from the reading. Duty Cycle correction = 20 log (dwell time/100ms) For frequencies above 1GHz (Peak measurements). Limit = max. aver. reading-20dB +20dB(because Peak detector is used) 97,66 dBµV/m For frequencies above 1GHz (Average measurements). Max. reading – 20 dB - duty cycle correction: No duty cycle correction was added to the reading 97,66 dBµV/m - 20 dB=77,66 dBµV/m Remarks: See attached diagrams. Test equipment used: ETS 0125, ETS 0271 ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 18 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.5 Transmitter Radiated Emissions in restricted Bands FCC Rules: 15.247 (c), 15.205, 15.209, 15.35 Radiated emission measurements were performed from 30 MHz to 26000 MHz. For radiated emission tests, the analyzer setting was as followings: RES BW VID BW Frequency <1 GHz 100 kHz 100 kHz (Peak measurements) Frequency >1 GHz 1 MHz 1 MHz (Peak measurements) 1 MHz 1 MHz (Average measurements) Limits: For frequencies below 1GHz : Frequency of Emission Field strength Field Strength (MHz) (microvolts/meter) (dB microvolts/meter) 30 – 88 100 40.0 88 – 216 150 43.5 216 – 960 200 46.0 Above 960 500 54.0 For frequencies above 1GHz (Average measurements). Guidance on Measurement of FHSS Systems: “If the emission is pulsed, modify the unit for continous operation , use the settings shown above, then correct the reading by subtracting the peak-average correction factor, derived from the appropiate duty cycle calculation.” Here the correction was added to the limit instead subtracted from the reading. Duty cycle correction = 20 log (dwell time/100ms) For frequencies above 1GHz (Average measurements). Limit – duty cycle correction No duty cycle correction was added to the reading. 54.0dBµV/m For frequencies above 1GHz (Peak measurements). Limit + 20dB 54.0dBµV/m + 20 dB= 74 dBµV/m Remarks: See attached diagrams. ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 19 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Test equipment used: ETS 0125, ETS 0271 3.6 Spurious emissions (tx) Spurious emission was measured with modulation (declared by manufacturer). In any 100 kHz bandwidth outside the frequency band in which the intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Attenuation below the general limits specified in § 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in § 15.205(a), must also comply with the radiated emission limits specified in § 15.209(a) (see § 15.205(c)). SAMPLE CALCULATION OF LIMIT. All results will be updated by an automatic measuring system in accordance with point 2.3. Calculation of test results: Such factors like antenna correction, cable loss, external attenuation etc. are already included in the provided measurement results. The peak and average spurious emission plots was measured with the average limits. In the Table being listed the critical peak and average value an exhibit the compliance with the above calculated Limits. If in the column‘s correction factor states a value then the max. Field strength in the same row is corrected by a value gained from the “Marker-Delta-Method“ or the „Duty-Cycle Correction Factor“. Summary table with radiated data of the test plots Freq. Used Frequency Polari- D Max. Field Compliance Detec- BW Margin Ch. Marker zation corrections Strength Limit tor [GHz] dB [dBµV/m] [dBµV/m] [MHz] [dB] 3 0 2.400 H 72,82 97,66 P 1 -24,84 3 0 2.400 V 75,66 97,66 P 1 -25,00 3 78 2.484 H 51,17 74,00 P 1 -22,83 3 78 2.485 V 52,81 74,00 P 1 -21,19 Freq. – Frequency Range: 1: 30 – 200 MHz 2: 200 – 1000 MHz 3: 1 – 4 GHz 4: 4 – 8 GHz 5: 8 – 12 GHz 6: 12 – 17 GHz 7: 17 – 26,5 GHz ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 20 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH All other not noted test plots do not contain significant test results in relation to the limits. TEST RESULT (Transmitter): The unit DOES meet the FCC requirements. Comment: see attached diagrams Test equipment used: ETS 0125, ETS 0340, ETS 0271 ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 21 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.7 Carrier Frequency Separation Carrier Frequency Separation was measured with modulation (declared by manufacturer). According to FCC rules part 15 subpart C §15.247 frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or 20 dB bandwidth of the hopping channel, wichever is greater. Channel Separation Test conditions Channel B Channel B+1 Tnom= 23°C Vnom = 3,7 V 1.00521042 MHz Measurement uncertainty < 10 Hz Limits: Frequency Range Limits MHz 20 dB bandwidth < 25 kHz 20 dB bandwidth > 25 kHz 902 - 928 25 kHz 20 dB bandwidth 2400 – 2483,5 25 kHz 20 dB bandwidth 5725 – 5850 Test equipment used: ETS 0125, ETS 0271 Comment: see attached diagram ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 22 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.8 Number of Hopping Frequencies According to FCC rules part 15 subpart C §15.247 frequency hopping systems operating in the 2400-2483.5 MHz band shall use at least 15 hopping frequencies. Frequency hopping systems in 5725-5850 MHz band shall use least 75 hopping frequencies. For frequency hopping systems operating in the 902-928 MHz band: if the 20dB bandwidth of the hopping channel is less than 250 kHz, the system shall use at least 50 hopping frequencies; if the 20dB bandwidth of the hopping channel 250 kHz or greater, the system shall use at least 25 hopping frequencies. Number of Test conditions Operating Mode Channels Tnom= 23°C Vnom = 3,7 V normal transmitting 79 Tnom= 23°C Vnom = 3,7 V inquiry mode -- Limits: Limit Frequency Range 20dB Bandwidth 20dB Bandwidth 20dB Bandwidth MHz < 250 kHz ³ 250 kHz £ 1 MHz 902 - 928 MHz ³ 50 ³ 25 2400 – 2483,5 ³15 ³15 - - 5725 - 5850 MHz ³75 - - - Test equipment used: ETS 0125, ETS 0340 Comment: see attached diagrams 3.8.1 Pseudorandom Frequency Hopping Sequence The generation of the hopping sequence is determined by the Bluetooth core specification and complies with the FCC requirements. 3.8.2 Coordination of hopping sequences to other transmitters According to the Bluetooth core specification V1.1 such a coordination is not possible. During scatternet function only one of the two hopping sequences will be used at a definite moment. 3.8.3 System Receiver Hopping Capability According to the Bluetooth core specification.the system receivers shift frequencies in synchronization with the transmitted signals. ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 23 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.9 Time of Occupancy (Dwell Time) Frequency hopping systems operating in the 5725-5850 MHz band shall use an average time of occupancy on any frequency not greater than 0.4 seconds within a 30 second period. In 2400-2483,5 MHz band the average time of occupancy on any channel shall not be greater than 0,4 seconds multiplied by the number of hopping channels employed. For frequency hopping systems operating in the 902-928 MHz band: if the 20dB bandwidth of the hopping channel is less than 250 kHz, the average time of occupancy on any frequency shall not greater than 0.4 seconds within a 20 second period; if the 20dB bandwidth of the hopping channel is 250 kHz or greater, the average time of occupancy on any frequency shall not be greater than 0.4 seconds within a 10 second period. Measurement Test conditions Operating mode Time of Occupancy periode Tnom= 23°C normal transmitting 31,6 s 187,07 ms Vnom = 3,7 V Channel B inquiry mode -- -- Measurement uncertainty < 1 ms Limits and measurement periodes: Frequency MHz Number of channels Measurement Periode Limit ³50 20 s 0,4 s 902 – 928 49 ³ 25 10 s 0,4 s 0,4 s * number of used 2400 – 2483,5 ³ 15 0,4 s channels 5725- 5850 ³ 75 30 s 0,4s Test equipment used: ETS 0125, ETS 0271 Comment: See attached diagram, which show the On-time and the number of counted events during the measurement period. ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 24 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.10 20dB Bandwidth Frequency hopping systems operating in the 5725-5850 MHz bands shall use a maximum 20dB bandwidth of 1 MHz. The 20dB bandwidth is measured on the lowest,middle and highest hopping channel. For frequency hopping systems operating in the 902-928 MHz band the maximum 20dB bandwidth of the hopping channel is 500 kHz. 20 dB Bandwidth Test conditions Channel A Channel B Channel C Tnom= 23°C Vnom = 3,7 V 0.617 MHz 0.701 MHz 0.701 MHz Measurement uncertainty < 10 Hz Limits: Frequency Range / MHz Number of channels Limit < 50 < 250 kHz 902 – 928 49 ³ 25 500 kHz ³ 250 kHz 2400 – 2483,5 ³ 15 not determined 5725 - 5850 75 £ 1MHz Test equipment used: ETS 0125, ETS 0271 Comment: see attached diagram 3.10.1 System Receiver Input Bandwidth It is determined in the Bluetooth core specification. The value matches to the bandwidth of transmitter signal. ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 25 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.11 Band-edge Compliance of RF Emissions According to FCC rules part 15 subpart C §15.247(c) in any 100 kHz bandwidth outside the frequency band in which the intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Attenuation below the general limits specified in § 15.209(a) is not required. In addition radiated emission which fall in the retsricted bands, as definied in section 15.205(a), must also with the radiated emisssion limits. Attenuation at or outside band-edges Test conditions Single Frequency Lower Band-edge Upper Band-edge Tnom= 23°C Vnom = 3,7 V 35,50 dB 34,81 dB Measurement uncertainty < 100 Hz Attenuation at or outside band-edges Test conditions Hopping Fequency Lower Band-edge Upper Band-edge Tnom= 23°C Vnom = 3,7 V 36,64 dB 35,85 dB Measurement uncertainty < 100 Hz Limits: Frequency Range / MHz Limit 902 –928 2400 – 2483.5 - 20 dB 5725 - 5850 Test equipment used: ETS 0125, ETS 0271 Comment: see attached diagrams ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 26 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 4 Conducted Measurement at (AC) Power Line For an intentional radiator wich is designed to be connected to the puplic utility (AC) power line, the radio frequency voltage that is conducted back onto the AC line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the table belows with this provision shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminals. This measurement was transact first with instrumentation using an average and peak detector and a 10 kHz bandwidth. If the peak detector achieves a calculated level, the measurement is repeated by an instrumentation using a quasi-peak detector. Level Frequency quasi-peak average -- -- dBuV -- dBuV Limits: Frequency of Emission (MHz) Conducted Limit (dBuV) Quasi Peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 Test is not required if the sample is using a battery. Test equipment used: ETS 0003, ETS 0040, ETS 0109, ETS 0125 Comment: see attached diagram ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 27 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Appendix A Pictures B Peak Output Power C Spurious Emissions radiated - Transmitter operating D Spurious Emissions conducted - Transmitter operating E Carrier Frequency Separation F Number of Hopping Frequencies G Time of Occupancy (Dwell Time) H 20dB Bandwidth I Band-edge Compliance of RF Conducted Emissions J Conducted Measurement at (AC) Power Line ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Page 28 of 28

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Appendix A Pictures ETS Dr. Genz GmbH, Germany Registration number: G0M20306-7948-P-15 Appendix A


Document Created: 2003-07-07 10:37:01
Document Modified: 2003-07-07 10:37:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC