Users Manual

FCC ID: BCE-250

Users Manual

Download: PDF
FCCID_356818

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 2 Learning to Use the Learning to Use the JABRA FreeSpeakTM BT250 JABRA FreeSpeakTM BT250 Wireless Mobile Headset Wireless Mobile Headset for Bluetooth Phones for Bluetooth Phones This Manual is in English JABRA Corporation Spanish/Español 9171 Towne Centre Drive, Suite 500 (page 27) San Diego, California 92122 USA French/Français (page 53) 1 800 EAR 2230 (USA and Canada) Tel: 858 622 9955 Fax: 858 622 0353 E-mail: info@jabra.com www.jabra.com www.jabra.com/fscs © 2002 JABRA Corporation, a GN Netcom company. All rights reserved. Patents pending. JABRA, the JABRA logo, and EarGels are registered trademarks of JABRA Corporation in the USA and may be registered in other countries. FreeSpeak, MiniGel and Eargonomic are trademarks of JABRA. Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by JABRA under license. Design and specifications subject to change without notice. The JABRA FreeSpeak headset may not be authorized for use in some countries. 500-00225-00

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 4 Headset for Bluetooth Phones ™ FreeSpeak.The best JABRA FreeSpeak Wireless Mobile Headset Table of Contents Introduction ...................................................................................................................................................2 connection is cord-free. What is included in this package? ........................................................................................................3 Headset feature overview ..........................................................................................................................4 Preparing your JABRA FreeSpeak.........................................................................................6 Charging the battery and talk time .......................................................................................................6 LED in-use indicator Multi-function on/off Turning your headset ON and OFF ......................................................................................................7 Introduction to Bluetooth ‘pairing’.........................................................................................................8 Lets others know Supports voice- Pairing to a Bluetooth phone....................................................................................................................8 you’re on the line. activated dialing and answer/ Attaching the charging cradle clip........................................................................................................9 end commands. (Varies with phone model.) Using your JABRA FreeSpeak headset .........................................................................10 About the MiniGel™ .....................................................................................................................................10 JABRA MiniGel Choosing left or right ear wearing style .........................................................................................10 Lithium polymer Channels sound for battery Placing the headset on your ear .........................................................................................................10 superior clarity and Making a call ....................................................................................................................................................11 reception. Pivots Rechargeable, Ending a call .....................................................................................................................................................11 for use in either ear. long-lasting. Answering a call.............................................................................................................................................12 Transferring a call ..........................................................................................................................................12 Charger/holder Call-waiting ........................................................................................................................................................12 Uni-directional Versatile all-in-one Other useful things to know .....................................................................................................13 microphone design includes a Controlling headset volume ...................................................................................................................13 belt clip. Emphasizes your Understanding the FreeSpeak indicators ......................................................................................13 voice over any Frequently asked questions ....................................................................................................................15 background noise. Troubleshooting ..............................................................................................................................................17 FreeSpeak specifications ..........................................................................................................................19 FreeSpeak models .......................................................................................................................................20 Safety, electromagnetic interference, and general information .......................................21 Volume control FCC notice to users and product statements .............................................................................22 European CE notice to users and product statements ........................................................23 Provides easy, one-touch access. Industry Canada notice to users and product statements .................................................23 Contacting JABRA ........................................................................................................................................24 JABRA limited product warranty .........................................................................................................25 Spanish/Español ...................................................................................................................................27 French/Français .....................................................................................................................................53

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 6 2 3 Introducing your JABRA FreeSpeak wireless mobile What is included in this package? headset for Bluetooth phones Your JABRA BT250 FreeSpeak headset package includes: Thank you for purchasing the JABRA FreeSpeak headset. Your FreeSpeak enables convenient cord-free communications with • One JABRA FreeSpeak headset Bluetooth mobile phones and other Bluetooth devices. It works with Bluetooth devices from a variety of different manufacturers, provided they are compatible with Bluetooth (version 1.1 or higher) and support the Bluetooth headset profile. To learn how to use your FreeSpeak appropriately, please take a few moments to read the manual thoroughly and retain it for future reference. For your safety, please ensure that you are fully • One JABRA charging cradle for accustomed with FreeSpeak before using it while driving. holding the FreeSpeak and charging Thank you again for choosing JABRA. We trust that FreeSpeak the headset battery will become a valuable part of your mobile communications. Please remember to register your FreeSpeak and to contact us with your feedback at www.jabra.com/fscs. • One removable charging cradle clip for belt or purse • One AC power adapter used with charging cradle for charging headset (not exactly as shown) • Three JABRA MiniGels (one attached to headset, plus two additional)

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 8 4 5 Headset feature overview Part Name Description Page 1. Headset Indicator Indicator light shows status 13 Light (LED) of the headset 1 • ACTIVE (call in progress) • STANDBY (ready for call) • OFF 2 2. Multi-Function or Controls various functions of 7–8 ‘Answer/End’ Button the headset including initiating, answering, transferring, and ending calls. Also used for turning headset on and off, as 5 well as pairing the headset to 6 a Bluetooth phone. Labeled and referred to by the 11–12 symbol: To make the button easy to locate, it is slightly raised. 3 3. Volume Control Adjusts the loudness of the sound 13 Button that you hear. Labeled by: 4. Microphone For outgoing audio. N/A 7 5. Speaker For incoming audio. N/A 6. MiniGel One-size-fits-all gel for either 10 4 ear. (FreeSpeak should only be used with the MiniGel in place.) 7. Charging Port Contacts for charging the battery. N/A

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 10 6 7 Preparing your JABRA FreeSpeak Full charging provides up to 3 hours of talk time or up to 100 hours of standby time. FreeSpeak’s battery does not need to be completely Charging the battery and talk time used before charging. If the charger is left connected, it will not Before using FreeSpeak you will need to put the headset in its overcharge the battery. charging cradle and charge it fully. (The headset may be either on Low battery warning indicators: The headset needs to be recharged or off.) Insert FreeSpeak carefully by holding it on both sides and (steps 1-5) when you hear 3 rapid high-pitched tones through the pushing it in while rotating counterclockwise, as shown below. To headset’s speaker at 30 second intervals, or when you see the remove the headset, carefully hold the headset on both sides and indicator flash quickly 3 times every 3 seconds. Once the low battery pull while rotating clockwise, following the same sequence shown indicators start, you have approximately 3 to 5 minutes of talk time below, but in reverse. remaining. Turning your headset ON and OFF To turn your FreeSpeak ON: 1. Remove the headset from the charging cradle. 2. Press and hold the button firmly for at least 3 seconds until 1 2 the indicator light emits a very short burst of flashes and the speaker emits a quick series of beeps in ascending order. To begin charging: 3. Without delay, release the button. 1. Plug the AC power adapter into the charging cradle. An indicator light on the outside of your FreeSpeak will flash every 2. Plug the AC power adapter’s plug into an electrical wall outlet. 3 seconds while the headset is turned on. The headset is now in 3. While charging, the indicator light on the headset is on and ‘standby’ mode and ready for use. If you remove your headset from remains lit until charging is complete. The FreeSpeak headset the charging cradle (with the AC power adapter plugged in), then indicator light will only turn on if the headset is fully inserted into your headset will automatically turn on (standby mode). its charging cradle. If the light on the FreeSpeak still does not turn To turn your FreeSpeak OFF: on, see Troubleshooting. 1. Press and hold the button firmly for at least 3 seconds until 4. Charge the unit for approximately 2 hours or until the indicator the indicator light emits a very short burst of flashes and the light goes out. speaker emits a quick series of beeps in descending order. 5. You can now remove the headset from the charging cradle. 2. Without delay, release the button. The headset is now turned off. If you remove your headset from the charging cradle (with the AC There will be no indicator light activity in this mode. You will need power adapter plugged in), then your headset will automatically turn to wait 5 seconds before turning it on again. on (standby mode). If there is an incoming call and your headset is in As long as you are recharging your headset regularly, you do not the charging cradle (with the AC power adapter plugged in), then you need to turn your headset off after using it – you only need to end can answer the call on your headset simply by removing your headset the call (see Ending a call ). from the charging cradle.

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 12 8 9 Introduction to Bluetooth ‘pairing’ 8. Your phone’s display may also ask whether you want to change With a Bluetooth phone or other device, you must ‘pair’ the headset the headset’s name. If so prompted, we recommend that you with the device before you use your headset for the first time. approve the ‘JABRA BT250’ name rather than modify it. ‘Pairing’ creates a unique wireless link between two Bluetooth 9. If the FreeSpeak indicator light is still steadily lit, pairing was devices, eliminating the need to repeat the pairing process during unsuccessful and you will need to turn FreeSpeak off, return future use. The pairing process may vary depending on the device to step 1, and try again. with which you pair FreeSpeak (see the device’s operating guide). The following section describes how to pair your FreeSpeak headset Attaching the charging cradle clip to a typical Bluetooth phone. The charging cradle can be fastened to a belt or purse using the supplied clip. To attach the clip: Pairing to a Bluetooth phone 1. Locate the two slots on the charging cradle as shown below. To pair your FreeSpeak with a Bluetooth phone: 2. Position the clip with one flange in one slot. (Ensure that the hinge 1. Ensure that the FreeSpeak headset is off (see Turning your headset of the belt clip is in the same orientation relative to the charging ON and OFF ). cradle as shown.) 2. Press and hold down the button for approximately 7 seconds 3. Press clip gently onto the charging cradle until the other flange fits until the headset indicator light turns on steadily. (There will be into the other slot securely. You should hear a clicking sound when some short flashes before it goes on steadily.) the clip is correctly attached. 3. While the light is still steadily lit, release the button. The indicator light will remain on, indicating that the FreeSpeak is in pairing mode and waiting to communicate with another Bluetooth pairing device. 4. Follow the operating instructions for your Bluetooth phone to start the pairing process. Typically, this is done by going to a ‘setup’ or ‘connect’ menu and then selecting the options to ‘discover’ Bluetooth devices. It may take several seconds to establish a connection. 1 2 3 5. Your phone’s display should indicate to you that it found the ‘JABRA BT250’ headset and ask if you want to pair it. You should confirm this. 6. The phone’s display should then prompt you for a passkey or PIN. Enter a sequence of four zeros: 0000. 7. To indicate that pairing has been successful, the headset indicator light will briefly flash rapidly before it goes back to flashing every 3 seconds (standby mode).

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 14 10 11 Using your JABRA FreeSpeak headset Making a call Once you have charged, paired, and placed FreeSpeak in standby Now that you are wearing FreeSpeak (in standby mode), there are mode, you are ready to wear and use FreeSpeak. different ways to make a call. Calling with the phone’s keypad About the MiniGel™ 1. Using the phone’s keypad, dial the phone number. If this is your first JABRA product, you may be new to the MiniGel, which is an evolution of JABRA’s EarGel®. The soft ergonomic gel tip 2. Press the phone’s ‘send’ key – the phone initiates the call and on the end of the FreeSpeak is partially inserted into your ear canal. transfers the call from the phone to the headset automatically. It channels sound directly into your ear without occluding it. This Calling with the headset using voice commands improves your ability to hear conversations clearly even when your If your phone supports voice-activated dialing, you can use this local environment is noisy. The MiniGel works for either the left or feature with FreeSpeak. Note that voice-activated dialing on your right ear depending on your preference. To care for your MiniGel, phone must be enabled and voice tags (names and commands) remove it from the headset by gently lifting and pulling it off the previously stored. (Please refer to the phone’s user guide for speaker housing. Then, wash it in warm, soapy water. Never use your instructions on storing voice tags.) FreeSpeak headset without a MiniGel. 1. Place the headset in the desired wearing style. Choosing left or right ear wearing style 2. Briefly press the button on the headset. FreeSpeak can be worn on either ear. The MiniGel is attached in the 3. After the tone, say the name of the person you wish to call. factory for wearing in the right ear. To reposition it for wearing in 4. The phone automatically dials your selection, and you see the the left ear: details of the call on the phone screen (varies with phone model). 1. Carefully remove the MiniGel by gently lifting and pulling it off 5. When connected, you are free to communicate normally. the speaker housing. Hint: We recommend that you record all such voice tags using 2. Rotate the MiniGel 180 degrees from its original orientation. FreeSpeak in order to ”train” your phone to recognize voice tags 3. Replace the MiniGel onto the speaker housing. that come through FreeSpeak’s microphone instead of the phone’s Placing the headset on your ear microphone. Please consult your phone manufacturer’s web site for Initially, you may find it convenient to use a mirror as you follow the the latest recording methods and known issues. instructions below. After some practice, you should be able to place Ending a call the headset on your ear with just one hand. Use either of the following methods to end a call: • To end a call from the headset – press the headset’s button. 1. Place headset behind your ear • End a call from the phone’s keypad. 2. Loop top of headset over front of ear After either method you should hear a series of descending tones. 3. Insert MiniGel into ear canal The indicator light on the headset should also be flashing once every 3 seconds indicating that the headset is in standby mode and that you have ended your call.

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 16 12 13 Answering a call Other useful things to know Increase Volume Once FreeSpeak is in standby mode, it enables you to receive incoming calls without handling your phone. During an incoming call, Controlling headset volume Decrease Volume a ring tone will sound on your phone, as usual. You will also hear ring FreeSpeak offers louder speaker tones through the headset’s speaker. When you hear the tones, volume than most headsets due to answer your incoming call by pressing the button on your its active battery-powered amplifier. You may adjust the volume of its FreeSpeak and speak normally. If there is an incoming call and your speaker to eight pre-set levels. A recessed oval area identifies the part headset is in the charging cradle (with the AC power adapter plugged of the button which decreases the volume. As you press the unit’s in), then you can answer the call on your headset simply by removing volume control, you should hear the volume change. At the loudest your headset from the charging cradle. and softest levels, you will hear a single beep, indicating maximum and minimum volume. In addition, some phones allow you to control the You may also answer the call by using your phone’s keypad. In volume of FreeSpeak by using the phone’s volume controls. This this case you can transfer the call to the headset by following the feature varies by manufacturer. instructions in the next section. Understanding the FreeSpeak indicators Transferring a call FreeSpeak provides indications of charging, pairing, and calling status To transfer a call from the phone to the headset, briefly press the as described in the following table. headset’s button. If the headset is off, you will simply need to turn it on (see Turning your headset ON and OFF ). Headset Status Headset Indicator Light To transfer a call from the headset to the phone, turn the headset off (Visible) (see Turning your headset ON and OFF ). Note that some phones will require you to complete the transfer using the phone’s keypad. Power Off OFF Call-waiting Low Battery 3 rapid flashes every 3 seconds Some phones allow you to accept another incoming call while you are using FreeSpeak. This feature varies by mobile service provider Standby (ready for call) Flashes every 3 seconds and phone model. If you normally hear a beep, you will still hear this Active (call in progress) Flashes every second beep with your headset. If your phone service supports this feature, you can use either your phone’s keypad or your headset. To use your Charging In Process ON (while FreeSpeak is in charging cradle) phone’s keypad (recommended), you can switch between calls using Charging Complete OFF (while FreeSpeak is in charging cradle) the standard method as specified by your phone manufacturer. To use the headset to switch between calls, briefly press FreeSpeak’s Pairing Mode ON (when FreeSpeak is not in charging cradle) button once. As with your phone controls, you may then return to the initial call by briefly pressing the button once more. Pairing Successful Brief series of rapid flashes after pairing mode

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 18 14 15 Headset Status Headset Indicator Tones Frequently asked questions (Audible) How far from my phone will my JABRA wireless headset work? Your JABRA headset range is typically up to 30 feet (approximately Volume Limit Single beep when either lower or upper 10 meters) from the Bluetooth phone. In general, you will get the best volume limit reached performance when there are no obstructions (including parts of your Low Battery 3 rapid beeps repeated every 30 body) between your FreeSpeak headset and Bluetooth phone. As the seconds while on a call. 3 beeps every limits of the range are reached, you will hear a crackling noise along 5 minutes in standby mode indicates with your conversation. 3 to 5 minutes left of talk time. Will anything interfere with my conversation when I use a JABRA Out of Range No audio indications: deterioration of audio wireless headset? quality will alert user Appliances such as cordless phones and wireless networking equipment may cause interference with your conversation, usually adding a Pressed Single high-pitched beep crackling noise. In rare cases, interference may prevent the headset from communicating altogether. To reduce any interference, keep Incoming Call Ring tone FreeSpeak away from other devices that use or produce radio waves. Pairing Confirmation Single high-pitched tone Will my JABRA wireless headset interfere with my car’s electronics, radio, or computer? Active Mode Started Quick series of 2 tones – low to high pitch Your JABRA wireless headset produces significantly less power than a (Establish Audio Link) typical mobile phone. It also emits signals only in compliance with the Active Mode Ended Quick series of 2 tones – high to low pitch international Bluetooth standard (www.bluetooth.com). Subsequently, (End Call/Audio Link you should not expect any interference with standard consumer-grade Closed) electronics equipment. Power On Quick series of 4 tones – low to high pitch Can my conversation be heard by other Bluetooth phone users? When you pair your headset to your Bluetooth phone, you are creating Power Off Quick series of 4 tones – high to low pitch a private link between only these two Bluetooth devices. The wireless Bluetooth technology used in your headset is not easily monitored by third parties. In addition, Bluetooth wireless signals are significantly lower in power than those produced by a typical mobile phone. Thus, these signals are much harder to detect by third parties. What about radio frequency power? The FreeSpeak headset produces 1%, or less, of a typical mobile phone’s radio frequency power. Is it OK to wear my FreeSpeak in the rain or shower? FreeSpeak is NOT a waterproof device. Do not wear your headset in the rain or shower. Exposure to water may damage the product. What is that beeping sound in my ear? Beeping sounds may come from a number of sources. They may

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 20 16 17 be part of the mobile service/phone indicating that you have a Troubleshooting call-waiting or that your mobile phone’s battery is low. Learning how to use a Bluetooth headset takes more time than a You will also hear a beeping sound when the JABRA headset’s battery regular headset, but it offers considerable benefits once you’ve is low. This beeping will sound like a short sequence of tones as mastered it. Here are some common symptoms and solutions that described in Understanding the FreeSpeak indicators. will help get you going quickly. Nothing is working – what should I do? The best place to start is at the Troubleshooting section of this Symptom Solution manual. If none of the suggestions work, then please visit our web site Indicator light on • Ensure that the headset is fully inserted into at www.jabra.com/fscs for the latest customer support information or headset does not the charging cradle. contact us through the methods listed. turn on when charging • Ensure that the AC power adapter is plugged Will FreeSpeak work with laptops, PCs, and PDAs? firmly into an electrical wall outlet. The FreeSpeak headset will work with all devices that are compliant with Bluetooth version 1.1 and include the ‘headset’ profile. The first • Ensure that the cable coming from the AC such suppliers included many cellular phone manufacturers and some power adapter is firmly plugged all the way personal digital assistant (PDA) manufacturers. As Bluetooth becomes into the charging cradle. widespread, more and more manufacturers will support ‘headset’ profile implementations of Bluetooth. Headset indicator • Ensure that the headset is charged, on, and light does not blink not in pairing mode. Can the battery be recycled? Yes, lithium polymer batteries can be recycled. Recycling regulations Headset does not • If your phone indicates that pairing was vary depending on where you live so please dispose of the headset ‘pair’ with Bluetooth unsuccessful, then ensure that all other accordingly. phone nearby Bluetooth devices (except the FreeSpeak headset) are off and reattempt Why don’t I get as much talk time as I used to? ‘pairing.’ Your battery may have exceeded the manufacturer’s total number of recharging cycles. Contact JABRA customer support or go to Phone does not • You may have to wait a little longer than www.jabra.com/fscs for further information. respond quickly usual when activating calls on your regular when is mobile phone. If the delay is too long and What material is the headset made of? pressed you miss a call, you can either change the The MiniGel is made of PVC (polyvinyl chloride), a form of plastic. The number of rings before your phone goes to headset itself is primarily made of thermoplastic polyurethane, which is voicemail or you can answer calls using your a soft plastic. The face of the headset, where the buttons are located, is phone’s keypad first. made of polycarbonate, a very strong, hard plastic. Neither the MiniGel nor the headset contain latex. • If you connect to numerous Bluetooth devices and have previously ‘paired’ them How do I take care of FreeSpeak? with your phone, you may find that your The headset is virtually maintenance-free. phone responds faster if you eliminate 1. To clean the headset, use a clean, soft cloth that is slightly damp. any unneeded devices from the list of 2. Do not expose FreeSpeak to extreme temperatures, such as Bluetooth devices registered in your phone. storing it on a vehicle dashboard.

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 22 18 19 Phone does not Your phone’s manual should indicate how FreeSpeak specifications respond quickly to do this. when is • Some phones have difficulties with Bluetooth Bluetooth Compliance With Bluetooth version 1.1 devices pressed devices. You may need to turn off the that support the headset profile (continued) power to your phone and then turn it back Bluetooth Power 2.5 milliWatts (0.0025 Watts) on again. Maximum Cord-free 30 feet (approx. 10 meters) • There may be interference present in your Link Distance environment; distance yourself from any known wireless devices. Headset Weight 0.8 oz or 23g Phone or headset • Some phones have difficulties with Bluetooth Typical Talk Time 3 hours does not respond at devices. You may need to turn off the power Typical Standby Time 100 hours all when is to your phone and then turn it back on pressed again. Typical Charging Time 2 hours • You may need to reset the headset. This Battery Type Rechargeable lithium polymer (recycle can be done by placing the headset back accordingly – not field serviceable) into the charging cradle for recharging (see Charging the battery and talk time ). Wait 5 Other Comments Not waterproof seconds while the reset process completes. Then you can disconnect the charger and attempt to use your headset again. Crackling noise • There is an interfering signal nearby. • You have exceeded the 30 ft. wireless range. The indicator light on • You may have pressed the button too my FreeSpeak went long when you were answering or making a on unexpectedly and call. The headset went into pairing mode. isn’t going off To turn the headset off press and hold the button for 3 seconds. You will NOT have to pair your headset again.

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 24 20 21 FreeSpeak models Safety, electromagnetic interference, and general The following product models are available for FreeSpeak in information North America. Other products and accessories are under • Warning: Contains small parts which may be hazardous to development, so please check our web site for more information. children under the age of 3. Product and Part Number Package Contents • If any part of this product should fall into a liquid, or should liquid fall into it, unplug all electrical connections. Headset for • JABRA FreeSpeak headset • Nearly every electronic device is susceptible to electromagnetic Bluetooth Phones • Charging cradle (charger/holder) interference (EMI) if inadequately shielded, designed, or otherwise 100-91000000-02 • AC power adapter (115 VAC, 60Hz) configured for electromagnetic compatibility. Switch OFF FreeSpeak • 3 one-size-fits-all MiniGels™ before boarding any aircraft to prevent the risk of interference with • Illustrated user guide in 3 languages: aircraft communication systems. Switch OFF the headset in any English, Spanish, French facility where posted notices instruct you to do so. Hospitals and healthcare facilities may be using equipment that is sensitive to Headset and Adapter • JABRA FreeSpeak headset EMI. Patients with implanted cardiac pacemakers should consult for Non-Bluetooth • Multi-adapter (charger/holder/ their physicians before using FreeSpeak. Phones Bluetooth adapter) with belt clip 100-91030000-02 • 2.5mm, 3-conductor audio plug • AC power adapter (115 VAC, 60Hz) • 3 one-size-fits-all MiniGels™ • 1 stylus • Illustrated user guide in 3 languages: English, Spanish, French Headset and Adapter • JABRA FreeSpeak headset for Non-Bluetooth • Multi-adapter (charger/holder/ Phones (version for Bluetooth adapter) with belt clip certain Nokia Phones) • 2.5mm, 4-conductor audio plug for Nokia 1200/ 100-91430000-02 3300/3500/6500/8200/8300/8800 series phones • Audio socket adapter for Nokia 3200/ 5100/6100/6300/7100 series phones • AC power adapter (115 VAC, 60Hz) • 3 one-size-fits-all MiniGels™ • 1 stylus • Illustrated user guide in 3 languages: English, Spanish, French

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 26 22 23 FCC notice to users and product statements European CE notice to users and product statements This device complies with part 15 of the FCC Rules. Operation is This product is CE marked according to the provisions of the R & TTE subject to the following two conditions: (1) This device may not cause Directive (99/5/EC). Hereby, GN Netcom, declares that this product harmful interference, and (2) this device must accept any interference is in compliance with the essential requirements and other relevant received, including interference that may cause undesired operation. provisions of Directive 1999/5/EC. For further information please consult http://www.gnnetcom.com. Please note that this product uses Users are not permitted to make changes or modify the device in any radio frequency bands not harmonized within EU. Within the EU this way. Changes or modifications not expressly approved by JABRA product is intended to be used in Austria, Belgium, Denmark, Finland, (GN Netcom) will void the user’s authority to operate the equipment. France, Germany, Greece, Ireland. Italy, Luxembourg, The This equipment has been tested and found to comply with the limits Netherlands, Portugal, Spain, Sweden, United Kingdom and within for a Class B digital device, pursuant to part 15 of the FCC Rules. EFTA in Iceland, Norway and Switzerland. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment Industry Canada notice to users and product statements generates, uses and can radiate radio frequency energy and, if not Operation is subject to the following two conditions: (1) This device installed and used in accordance with the instructions, may cause may not cause interference and (2) This device must accept any harmful interference to radio communications. However, there is no interference, including interference that may cause undesired guarantee that interference will not occur in a particular installation. If operation of the device. To prevent radio interference to the licensed this equipment does cause harmful interference to radio or television service, this device is intended to be operated indoors and away from reception, which can be determined by turning the equipment off and windows to provide maximum shielding. Equipment (or its transmit on, the user is encouraged to try to correct the interference by one antenna) that is installed outdoors is subject to licensing. or more of the following measures: The term “IC:” before the certification/registration number only • Reorient or relocate the receiving antenna. signifies that registration was performed based on a Declaration of • Increase the separation between the equipment and receiver. Conformity indicating that Industry Canada technical specifications were met. It does not imply that industry Canada approved the • Connect the equipment into an outlet on a circuit different from equipment. that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

FreeSpeakManualALLBT10/13 11/1/02 1:16 PM Page 28 24 25 Contacting JABRA JABRA limited product warranty JABRA warrants to Purchaser that for a period of one (1) year after the date of purchase (the “Warranty Period”) of any JABRA Product (“Product”) by Mail JABRA Corporation Purchaser, the Product will substantially conform to JABRA’s published 9171 Towne Centre Drive, Suite 500 specifications for the Product on the date of Purchaser’s purchase of the San Diego, CA 92122 USA Product, subject to the terms herein. Purchaser shall notify JABRA of any nonconformance during the Warranty Period and obtain a return material Web General: www.jabra.com authorization (“RMA”), by phone at (800) 327-2230, or (858) 622-9955, or by FreeSpeak Customer Support: www.jabra.com/fscs email at info@jabra.com or in writing to the address listed below. Purchaser must send the nonconforming Product with the original receipt, or a copy of the E-mail Information: info@jabra.com original receipt, as proof of purchase date and the RMA number that has been Sales: sales@jabra.com issued for the nonconforming Product to: JABRA Corporation, 9171 Towne Tech Support: techsupp@jabra.com Centre Drive, Suite 500, San Diego, California 92122, Attn: RMA #, freight prepaid by Purchaser, with a statement describing the nonconformity. JABRA’s Telephone Tel: 1 (800) 327-2230 (toll-free in U.S. and Canada) exclusive obligation with respect to nonconforming Product shall be, at JABRA’s Tel: (858) 622-9955 option and expense, to repair or replace such Product so that it substantially conforms with its published specifications on the date of Purchaser’s purchase, Fax: (858) 622-0353 or, if JABRA, in JABRA’s sole discretion, determines that it is not possible to repair or replace the Product, JABRA may, at JABRA’s option, refund to Support Hours 8AM – 5PM, Pacific Standard Time Purchaser the purchase price paid for the Product. THE FOREGOING IS Monday – Friday PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR BREACH OF WARRANTY BY JABRA WITH RESPECT TO THE PRODUCT. The warranty set forth above shall not apply to any Product which has not been properly used or handled in accordance with the instructions supplied by JABRA, or which has been modified, repaired or altered, except by JABRA authorized service facility, or which has been subjected to faulty installation, misuse, abuse, or which the Product defect is attributable to any failure or damage which is beyond reasonable control of JABRA. This warranty is available only to Purchaser, and does not extend to any distributors, retailers, or other resellers of the Product. THE FOREGOING WARRANTIES ARE THE SOLE WARRANTIES, EXPRESSED OR IMPLIED, GIVEN BY JABRA IN CONNECTION WITH THE PRODUCT, AND JABRA DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. JABRA SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PRODUCT, EVEN IF JABRA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIABILITY OF JABRA HEREUNDER FOR ALL CLAIMS SHALL NOT EXCEED THE AMOUNT PAID BY PURCHASER TO JABRA FOR THE PRODUCT GIVING RISE TO JABRA’S LIABILITY.


Document Created: 2003-08-11 13:56:41
Document Modified: 2003-08-11 13:56:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC