Test Report DFS Original

FCC ID: B94HNC04PDCP2

Test Report

Download: PDF
FCCID_4460791

CERTIFICATE #3478.01 TEST REPORT EUT Description WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card, LTE Coexistence Brand Name Intel® Wi-Fi 6 AX200 Model Name AX200D2WL FCC ID PD9AX200D2L ISED ID 1000M-AX200D2L Date of Test Start/End 2019-01-15 / 2019-01-16 802.11ax, Dual Band, 2x2 Wi-Fi + Bluetooth® 5 Features (see section 5) Applicant Intel Mobile Communications 100 Center Point Circle, Suite 200 Address Columbia, South Carolina 29210 USA Contact Person Steven Hackett Telephone/Fax/ Email steven.c.hackett@intel.com FCC CFR Title 47 Part 15E Reference Standards RSS-247 issue 2 (see section 1) Test Report identification 181210-02.TR06 Rev. 00 Revision Control This test report revision replaces any previous test report revision (see section 8) The test results relate only to the samples tested. The test report shall not be reproduced in full, without written approval of the laboratory. Issued by Reviewed by Digitally signed by Digitally signed by In Cheiel Date: 2019.02.13 17:08:53 Gregory ROUSTAN +01'00' Date: 2019.02.13 08:47:53 Adobe Acrobat DC version: +01'00' 2015.006.30464 Gregory ROUSTAN Cheiel IN (Test Engineer Lead) (Technical Manager) Intel Corporation SAS – WRF Lab 425 rue de Goa – Le Cargo B6 - 06600, Antibes, France Tel. +33493001400 / Fax +33493001401 FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 1 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 Table of Contents 1. Standards, reference documents and applicable test methods ......................................................................... 3 2. General conditions, competences and guarantees ............................................................................................. 3 3. Environmental Conditions ...................................................................................................................................... 3 4. Test samples ............................................................................................................................................................ 3 5. EUT Features ............................................................................................................................................................ 4 6. Remarks and comments ......................................................................................................................................... 4 7. Test Verdicts summary ........................................................................................................................................... 4 7.1. DYNAMIC FREQUENCY SELECTION .......................................................................................................................... 4 8. Document Revision History .................................................................................................................................... 4 Annex A. Test & System Description ....................................................................................................................... 5 A.1 MEASUREMENT SYSTEM........................................................................................................................................ 5 A.2 TEST EQUIPMENT LIST .......................................................................................................................................... 6 A.3 MEASUREMENT UNCERTAINTY EVALUATION ........................................................................................................... 6 Annex B. Test Results ............................................................................................................................................... 7 B.1 TEST CONDITIONS................................................................................................................................................. 7 B.2 TEST RESULTS FOR DYNAMIC FREQUENCY SELECTION (DFS) ................................................................................. 7 Annex C. Photographs ............................................................................................................................................ 10 C.1 TEST SAMPLE ..................................................................................................................................................... 10 FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 2 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 1. Standards, reference documents and applicable test methods 1. FCC 47 CFR part 15 - Subpart E – Unlicensed National Information Infrastructure Devices. 2. FCC OET KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 – Compliance Measurement procedures for Unlicenced-National Information Infrastructure Devices Operating in the 5250-5350 MHz and 5470-5725 MHz Bands Incorporating Dynamic Frequency Selection. 3. RSS-247 Issue 2 – Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSS) and Licence- Exempt Local Area Network (LE-LAN) Devices 4. ANSI C63.10-2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. 2. General conditions, competences and guarantees  Intel Corporation SAS Wireless RF Lab (Intel WRF Lab) is an ISO/IEC 17025:2005 testing laboratory accredited by the American Association for Laboratory Accreditation (A2LA) with the certificate number 3478.01.  Intel Corporation SAS Wireless RF Lab (Intel WRF Lab) is an Accredited Test Firm recognized by the FCC, with Designation Number FR0011.  Intel Corporation SAS Wireless RF Lab (Intel WRF Lab) is a Registered Test Site listed by ISED, with ISED Assigned Code 1000Y.  Intel WRF Lab only provides testing services and is committed to providing reliable, unbiased test results and interpretations.  Intel WRF Lab is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test.  Intel WRF Lab has developed calibration and proficiency programs for its measurement equipment to ensure correlated and reliable results to its customers.  This report is only referred to the item that has undergone the test.  This report does not imply an approval of the product by the Certification Bodies or competent Authorities. 3. Environmental Conditions  At the site where the measurements were performed the following limits were not exceeded during the tests: Temperature 25 ºC ±1 ºC Humidity 38 % ± 1 % 4. Test samples Sample Control # Description Model Serial # Date of receipt 181210-02.S02 RF MODULE AX200D2WL WFM:3413E8B10C47 2018-12-13 180000-01.S14 EXTENDER PCB00495 ASS00495-01 4955013-045 2018-11-22 #1 180001-01.S20 ADAPTER Socket WsP/ThP - 2019-01-10 170000-01.S13 LAPTOP LATITUDE E5470 FT6LMC2 2017-05-30 FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 3 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 5. EUT Features Brand Name Intel® Wi-Fi 6 AX200 Model Name AX200D2WL FCC ID PD9AX200D2L ISED ID 1000M-AX200D2L Software Version Proset 20.115.0 Driver Version 20.115.0.4 Prototype / Production Production 802.11b/g/n/ax 2.4GHz (2400.0 – 2483.5 MHz) 802.11a/n/ac/ax 5.2GHz (5150.0 – 5350.0 MHz) Supported Radios 5.6GHz (5470.0 – 5725.0 MHz) 5.8GHz (5725.0 – 5850.0 MHz) Bluetooth 5 2.4GHz (2400.0 – 2483.5 MHz) CHAIN A: PIFA antenna. WiFi 2.4GHz & 5GHz and BT Antenna Information CHAIN B: PIFA antenna. WiFi 2.4GHz & 5GHz Additional Information 6. Remarks and comments 1. The operating mode of the sample is client only without radar detection. 2. The maximum antenna gain is 5dBi. 7. Test Verdicts summary 7.1. Dynamic frequency selection FCC part RSS part Test name Verdict Non Occupancy Period P DFS Detection Threshold NA Channel Availability Check Time NA Uniform Spreading NA 15.407 (h) (2) RSS-247 part 6.3 U-NII Detection Bandwidth NA DFS Detection Threshold NA Channel Closing Transmission Time P Channel Move Time P U-NII Detection Bandwidth NA 8. Document Revision History Revision # Date Modified by Revision Details Rev. 00 2019-01-24 G. Roustan First Issue FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 4 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 Annex A. Test & System Description A.1 Measurement System Measurements were performed using the following setups, made in accordance to the general provisions of FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02. The EUT was installed in a test fixture and this test fixture is connected to a laptop computer and AC/DC power adapter. A second laptop computer was used to configure the access point on the DFS channels; a channel was selected randomly by the access point. To enable channel loading, this second laptop computer is also used as a server host, a video was streamed on the EUT. Conducted Setup FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 5 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 A.2 Test Equipment List Conducted Setup ID# Device Type/Model Serial Number Manufacturer Cal. Date Cal. Due Date Spectrum Rohde & R047 FSV40 102182 2018-12-18 2020-12-18 analyzer Schwarz Vector Signal Rohde & 0017 SMJ100A 100458 2017-11-24 2019-11-24 Generator Schwarz 0261 Access point Aironet IOS FTX134390GV Cisco NA NA NA: Not applicable A.3 Measurement Uncertainty Evaluation The system uncertainty evaluation is shown in the below table: Measurement type Uncertainty Time domain ± 1 ms FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 6 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 Annex B. Test Results B.1 Test Conditions The EUT power supply was provided by the Extender test board, V nominal = 3.3 VDC. The software PROSet/Wireless Intel® 20.115.0 was used to set the EUT in normal operation mode. B.2 Test results for Dynamic Frequency Selection (DFS) Test procedure The conducted setup shown on Section A.1 was used to measure the Channel Closing Transmission Time and Channel Move Time. The Client Device (UUT) is set up to associate with the Master Device. The channel loading test file is streamed from the Master Device to the Client Device. Radar test waveforms generated with the vector signal generator are injected into the Master on the operating channel above the DFS detection threshold. Observations are done on the transmissions of the UUT at the end of the radar burst on the Operating Channel for a duration greater than 10 seconds. We measured the transmissions from the UUT during the observation time, after radar detection occurs the Channel Move Time and Channel Closing Transmission Time are recorded. Results tables Tested Channel: 56, Frequency: 5280 MHz Test item Results Limit 200 ms + an aggregate of 60ms over Channel Closing Transmission Time < 5.8 ms remaining 10 seconds period. Channel Move Time 5.8 ms 10 seconds Non-Occupancy Period > 30 minutes 30 minutes FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 7 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 Results Screenshot Channel Move Time (large view) Marker M1 shows the end of the radar signal. Channel move time < 10s. Test PASS Channel Move Time (zoom view) Master transmission CF 5.28 GHz Last client burst End of radar signal This zoom picture is generated with proprietary tool which process of the spectrum analyzer trace. Between end of radar signal and last client burst is the time to cease all transmissions on the current channel. Channel closing transmission time < 5.8 ms. Test PASS Channel move time = 5.8 ms. Test PASS FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 8 of 10 Printed copies are not controlled documents

Test Report N° 181210-02.TR06 Rev. 00 Non-Occupancy Time No transmission of any type has occurred for 30 minutes. Test PASS FO-048 RFC FCC-ISED WLAN DFS Test Report_180514 9 of 10 Printed copies are not controlled documents


Document Created: 2019-02-13 17:08:53
Document Modified: 2019-02-13 17:08:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC