request for certification

FCC ID: B5KBKRC1311005-1

Cover Letter(s)

Download: PDF
FCCID_358232

                                                              Open
                                                              EXHIBIT 13                                            1 (1)
Prepared (also subject responsible if other)                  No.

EAB/RBI/R Per Helmersson
Approved                                       Checked        Date               Rev        Reference

KI/EAB/RBI/R (P Helmersson)                                   2003-09-15         B          B5KBKRC1311005-1
 Federal Communications Commission                             SP Sveriges Provnings- och ForskningsInstitut
 Authorization & Evaluation Division                           Brinellgatan 4
 7435 Oakland Mills Road                                       Box 857
 Columbia, Maryland 21046                                      S-501 15 Borås
 Attention: Equipment Authorization Branch                     Sweden

September 15, 2003


Subject: Certification for FCC ID: B5KBKRC1311005-1

Gentlemen;

Ericsson AB requests a Grant of Certification (Type Acceptance) for the above-mentioned FCC Identifier.

This base station transceiver is designed for use in the GSM 800 MHz cellular telephone system. The transmitter will
operate from 869.4 to 893.6 MHz. The receiver circuit supports 824.4 to 848.6 MHz. The base station operates in the
800 MHz broadband Cellular services as per 47 CFR Part 22 subpart H, 22.901 (d). It meets the requirements of
GSM1900 11.10-1 version 4.19.1 specification for operation in GSM cellular systems except for the output frequency
range.

This base station will in normal mode operate at a nominal power out of 40 watts at the antenna connector. In TCC
mode with two transmitters combined on the same frequency is the nominal output power 79 watts. The power output
is reducible to ~0.3 watts.
The following channels are excluded: Channel 128 – 869.2 MHz and channel 251 – 893.8 MHz. This is because of too
wide frequency spectrum at the band edges. This exclusion is done by database settings in the switch software and is
a part of the cell planning.

Ericsson AB requests confidentiality under CFR 0.459. Confidentiality for the following exhibits is requested:
Exhibit 5 CPU Part Schematics
Exhibit 5 RF Part Schematics

Justification of this request is in order to protect the large investment in developing this technology and to facilitate the
circuit miniaturization utilized in this design and protect the innovative design as well as proprietary techniques, which
are implemented. In order to protect Ericsson’s competitive advantage on these proprietary techniques, we request
the above listed exhibits be held as confidential and withheld from the Public Information File.

If additional information is needed, please contact me on the below listed number.

Sincerely,


Per Helmersson
Staff Engineer, Regulatory Programs
Ericsson AB
Torshamnsgatan 21-23 (Färögatan 6)
Kista, SE-164 80 Stockholm
Sweden
Telephone No.: +46 8 764 16 52
Fax No.: +46 8 404 41 90
e-mail: per.helmersson@ericsson.com



Document Created: 2003-09-15 15:46:08
Document Modified: 2003-09-15 15:46:08

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC