User Manual Part V

FCC ID: B32OMNI3600D

Users Manual

Download: PDF
FCCID_370921

VeriFone, Inc. 2455 Augustine Drive Santa Clara CA 95054-3002 Omni 3600 Certifications and Regulations Tel: 800-VeriFone (837-4366) www.verifone.com FCC Compliance Manufacturer: VeriFone, Inc. Separate Power Sources Model: Omni 3600 Some peripherals require a separate power source. Before connecting a check reader or similar device, turn off power to the FCC Part 15 Class B terminal. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not Peripherals cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Before connecting any peripheral device, turn off power to the terminal. Turn on power only after you are finished connecting the peripheral device(s). For complete information about peripheral installation and use, please refer to the user documentation SAR Labeling supplied with those devices. Mobitex Disconnecting Power USA Disconnecting power during a transaction may cause transaction data files that are not yet stored in terminal memory to be lost. To comply with the FCC RF exposure requirements, bystanders and parts of the users body other then the extremities must be at least 15.0mm away from the device. Surge Protectors CDMA To protect your terminal against possible damage caused by lightning strikes and electrical surges, you may want to install a power surge protector. USA Location – Electrical Considerations SAR compliance for body worn operating configurations is limited to the specific belt clips / holsters / accessories that have no metallic component in the assembly. The highest reported SAR values for Omni 3600C under the FCC ID B32OMNI3600C are: CAUTION: Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, PMS modes (Part 22) – Body-worn 0.0056mW/g. The highest reported SAR values for Omni 3600D under the FCC ID kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. B32OMNI3600D are: PMS modes (Part 22) – Body-worn 0.309mW/g, PCS mode (Part 24) - Body-worn: 0.232mW/g. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for Brazil example, air conditioners, neon signs, high-frequency or magnetic security devices, or electric motors). """O terminal Omni 3600 atende aos limites da Taxa de Absorção Específica referente à exposição a campos elécticos, magnéticos e electromagnéticos de radiofreqüências adoptados pela Anatel.""" Equipment GSM/GPRS Damage USA Carefully inspect the shipping carton and its contents for any damage. If the terminal or any product component appears damaged SAR compliance for body worn operating configurations is limited to the specific belt clips / holsters / accessories that have no or tampered with, immediately notify the shipping company and your VeriFone distributor or service provider. metallic component in the assembly. The highest reported SAR values under this FCC ID are: PMS modes (Part 22) – Body-worn CAUTION: Do not use a terminal that has been damaged or tampered with. 0.245mW/g, PCS mode (Part 24) - Body-worn: 0.218mW/g. Australia Required Warning Statement Repairs Please switch off and do not operate the equipment when in an area with a potentially explosive atmosphere, such as refueling points, fuel depots or storage areas, chemical plants, and blasting operations. Unless otherwise instructed in this document, do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local VeriFone distributor or service provider for assistance. Failure to comply may invalidate the Electrical product warranty. Location – Environmental Considerations LI-ion Battery Module—Rechargeable Battery Unit Caution Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. It is not waterproof or dustproof, and is for Do not: indoor use only. Any damage to the unit from exposure to rain or dust may void your warranty. • disassemble, crush, puncture, or incinerate in fire. Do not use the terminal where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the terminal away from • short circuit contacts. direct sunlight and anything that radiates heat, such as a stove or a motor. • expose to temperatures exceeding 140°F (60°C). Cleaners and Solvents Power Packs Never use thinner, trichloroethylene, or ketone-based solvents to clean the terminal — they may deteriorate plastic or rubber parts. Before you connect the terminal power pack to an electrical outlet, check that the on/off power switch on the terminal is off. If the Do not spray cleaners or other solutions directly onto the keypad or display. For best results, use a VeriFone Cleaning Kit or a clean terminal does not have an on/off switch, check that the power cable connector is removed from the terminal’s power port. cloth dampened with water and mild soap. To remove stubborn stains, use alcohol or an alcohol-based cleaner. or Location – Ease of Use When connecting the terminal to a power pack, always connect the three-pronged plug of the power pack to an electrical wall outlet first. Then connect the power cable to the terminal’s power port. Select a location for your terminal that contributes to its ease of use: AC Adapter • A location convenient for both merchant and cardholder. • A flat support surface, such as a countertop or table. The AC adapter is designed to ensure your personal safety and to be compatible with this equipment. Please follow these • A location near a power outlet and a telephone/modem line connection. guidelines: • Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet. WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the • Allow adequate ventilation around the adapter. Avoid locations with restricted airflow. user’s authority to operate this equipment. • Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging. • Do not use the adapter if the cord becomes damaged. • Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. Omni 3600 Certifications and Regulations continued VeriFone Part Number: 22475 Revision E  2003 VeriFone, Inc. All rights reserved.

a a DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY according to ISOAEC Guide 22 and EN 45014 according to ISO/IEC Guide 22 and EN 45014 CE 0682 CE 0682 Manufacturer‘s Name: VeriFone Inc. Manufacturer‘s Name: VeriFone Inc. Manufacturer‘s Address: VeriFone Manufacturer‘s Address: VeriFone 3755 Atherton Rd. 3755 Atherton Rd. Rocklin, CA 95765 Rocklin, CA 95765 95765—3701, USA 95765—3701, USA declares, that the product declares, that the product Product Name: Omni 3600 Product Name: Omni 3600G Model Number: PO96—100—03 Model Number: PO96—100—06 Product Options: All Product Options: All conforms to the following Product Specifications: conforms to the following Product Specifications: Safety: IEC 60950:1991+A1+A2+A3+A4 / EN60950:1992+A1+A2+A3+A44+A11 Safety: EC 519 (1999) EC 60950:1991+A1+A2+A3+A4 / EN60950:1992+A¥41+A2+A3+A44+¥11 EC recommendation 1999/519 EC EMC: EN 301 489—7 (9—2000) CISPR 22:1997 / EN 55022:1998 Class B EMC: CISPR 24:1997 / EN 55024:1998 EN 301 489 —1, v1.2.1 IEC 61000—3—2:1995 / EN 61000—3—2:1995+A¥14 EN 301 489 — 7, v1.1.1 IEC 61000—3—3:1994 / EN 61000—3—3:1995 CISPR 22:1997 / EN §55022:1998 CISPR 24;:1997 / EN §55024:1998 Wireless: EN 300 607—1 (GSM 11.10—1) IEC 61000—3—2:1995 / EN 61000—3—2:1995+¥414 IEC 61000—3—3:1994 / EN 61000—3—3:1995 Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive RF Spectrum Efficiency: 73/23/EEC, the EMC Directive 89/336/EEC, R&TTE Directive 1999/5/EC EN 301 §11, v7.0.1 (Annex II) and carries the CE—marking accordingly. Supplementary Information: Date: April 29, 2002 Jeff James The product herewith complies with the requirements of the Low Voltage Directive Regulatory Manager 73423/EEC, the EMC Directive 89/336/EEC, R&TTE Directive 1999/5/EC (Annex I1) and carries the CE—marking accordingly. European contact for regulatory topics only: VeriFone (UK) Ltd Salamander Quay West Park Lane, Harefield Date: May 13, 2003 Jeff James Uxbridge, Middlesex Regulatory Manager Ub9 GNZ United Kingdom Tel: (44) 1895 824031 European contact for regulatory topics only: VeriFone (UK) Ltd Salamander Quay VWest Park Lane, Harefield Uxbridge, Middlesex Ub3 BNZ United Kingdom Tel: (44) 1895 824031


Document Created: 2003-10-21 11:06:39
Document Modified: 2003-10-21 11:06:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC