UNII Declaration letter

FCC ID: B32CM5PW

Cover Letter(s)

Download: PDF
FCCID_4363784

                                                                                                                        July 10, 2019
                            DTS-UNII Device Declaration Letter
To whom it may concern,
We have declared below featured for FCC equipment authorization,
Device FCC ID: B32CM5PW
    n     s
                      ___
(1)    DFS Device --       Master                                      Client with Radar detection capability ,
                          Client without radar detection capability    N/A
(2)    Active / Passive Scanning , ad-hoc mode access point capability
        Frequency Band       Active Scanning      passive scanning Ad Hoc Mode or          Access point
             (MHz)            (the device can    (where the device     WIFI Direct           capability
                             transmit a probe     is can listen only    capability
                                 (beacon))         with no probes)
           5150-5250             Yes ,     No          Yes ,     No      Yes ,    No         Yes ,     No
           5250-5350             Yes ,     No          Yes ,     No      Yes ,    No         Yes ,     No
           5470-5725             Yes ,     No          Yes ,     No      Yes ,    No         Yes ,     No
           5725-5850             Yes ,     No          Yes ,     No      Yes ,    No         Yes ,     No

(3)      Country code selection ability - Yes ,     No
If yes, please explain how it was implemented: (please also help to provide detail of options for each country
selection)


(4)      Meet 15.202 requirement -             Yes,      No,
Please check below:
   A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling
signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices
   A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master.
A device in client mode is not able to initiate a network.
(5)       For client devices that have software configuration control to operate in different modes (active scanning in some and passive
scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or
modular devices which configure the modes of operations through software, the application must provide software and operations
description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end
user or an installer.
    Apply,      No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled)
Factory set only.



_____________________
__________________
        rkin
Don Perkins
Director, Engineering, R & D
Verifone, Inc.
Tel.: 916-625-1833
Fax: 916-625-1800
E-mail: Don_P3@verifone.com
                        Verifone, Inc. | 1400 West Stanford Ranch Road Suite 200 | Rocklin CA 95765       | USA
                                      (t) 916-625-1833 | (f) 916-625-1800 | www.verifone.com



Document Created: 2019-07-17 16:15:42
Document Modified: 2019-07-17 16:15:42

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC