User Manual Quick Reference Guide

FCC ID: AZ489FT7123

Users Manual

Download: PDF
FCCID_4279133

SLN 1000 LED Indicators for Operational and Charging Status LED Operational Status Charging Inserting the SIM Card QUICK REFERENCE GUIDE 1 Battery Cover Indication Status 2 2 LED Status Indicator Is transmitting; 1 Solid green Fully charged Radio is powering on 1 3 On/Off/Info Button Incoming call; 3 Blinking green During call hang-time Not applicable 4 Talkgroup/Contact List Scroll Rocker 2 4 Solid red Not applicable Rapid charge 5 Push-to-Talk (PTT) Button 1. Lift up the SIM card slot cover. 3. Slide the latch into lock position. Blinking Out of Service 2. With the contacts facing down, align the card notched end first and slide the SIM 3 6 Volume Button Faulty battery red card into the slot. Controls and Indicators 7 Menu/Contact List Button Blinking Amber Scan is enabled Not applicable Attaching and Removing the Antenna 8 Charging Contacts Attaching the Battery Getting Started 9 Blinking Green Not applicable In Do Not Disturb Mode 9 LTE Antenna and Amber Radio powered off; Not applicable 10 10 GPS/Wi-Fi No Indication Radio is idle; Radio kill 5 11 11 High-Output Speaker 12 12 Microphone 1 6 13 13 LED Display Battery Capacity Information LED Indication Voice 1. Align the battery contacts with the contacts inside the battery compartment. Insert 1. Turn the radio off. 14 Audio Accessory Port Icon Description 7 Announcement the contact side of the battery. Push the battery in gently. 2. Align the bottom part of the antenna to the threaded base on top of the radio. 15 USB Port 3. a. To attach the antenna, turn clockwise until snug. Do not force. www.motorolasolutions.com www.motorolasolutions.com Solid green Battery high 80%–100% capacity b. To remove the antenna, turn counterclockwise. 8 2 Solid amber Battery medium 60%–80% capacity Battery medium 25%–60% capacity Looking After The Radio 14 Solid amber Never leave the radio or battery in extreme temperatures (over +60 °C/140 °F), 15 Blinking red Battery low 5%–25% capacity for example, behind a windscreen in direct sunlight. 2. Insert the bottom tabs of the battery cover into the slot. Press down the top part The radio is not submersible. Blinking red Battery critically low Less than 5% capacity followed by the middle part of the battery cover. To clean the radio, use a moistened or antistatic cloth.

More Information on the Radio Notes Icons Activating and Provisioning the Radio Group List and Contact List Visit the following Web site at: Before using the radio, make sure the Nitro Cloud Customer account is activated. To select Group List, push the Talkgroup/Contact List Scroll Rocker. http://www.motorolasolutions.com/sln1000 Icon Description To switch from Group List to Contact List, press and hold the Menu/Contact List https://www.motorolasolutions.com/ActivateNitro/ To activate the Nitro Cloud Customer account, scan the QR code on the label Button. Battery Level behind the battery or visit the following website: To select user, push the Talkgroup/Contact List Scroll Rocker. Motorola Online and Open Source Software Legal Notices https://www.motorolasolutions.com/ActivateNitro To exit, press the Menu/Contact List Button. User Guide and related documents available at: Battery Charging https://learning.motorolasolutions.com After the device is activated, provisioning of Group List and Contact List Making Group Calls Volume Level Information can be configured in the Nitro Cloud portal. The radio must be configured as part of that group to make a call to a group of users. This device complies with part 15 of the FCC Rules. Select a channel with the active group alias or ID. Press the PTT Button. The LED Do Not Disturb (DND) Operation is subject to the following two conditions: status indicator lights up solid green. The display shows the group call alias. Wait for (1) This device may not cause harmful interference, and Turning the Radio On/Off the Talk Permit Tone to finish (if enabled), speak into the microphone. Release the Voice Announcement (2) This device must accept any interference received, To turn the radio on, press and hold the On/Off/Info Button until the LED status PTT Button to listen. Using the Device including interference that may cause undesired operation. All Alert Tones indicator lights up. To turn the radio off, press and hold the On/Off/Info Button until the screen Making Private Calls Display Brightness displays powering off animation. Icons To enter the contact list to make a call to a specific user, press and hold the Menu/Contact List Button. Select the preconfigured contact. Press the PTT Button. Location Using the Radio Menu Once the call is connected, the LED status indicator lights up solid green and displays This document is copyright protected. Duplications for the purpose of the use of Motorola products are the subscriber alias. Wait for the Talk Permit Tone to finish (if enabled), speak into the Wi-Fi Strength To enter and scroll through the menu, press the Menu/Contact List Button. permitted to an appropriate extent. Duplications for other purposes, changes, additions or other processing of microphone. Release the PTT Button to listen. this document are not permitted. Only this electronically-saved document is considered to be the original. To scroll through the programmed function in the sub-menu, press the Volume Duplications are considered merely copies. Motorola Solutions, Inc., and its subsidiaries and affiliates do not Cellular Strength Button. vouch for the correctness of such kinds of copies. To exit the menu, press the On/Off/Info Button, Talkgroup/Contact List Scroll MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered Software Available Rocker, PTT Button, or wait for timer to expire. trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are www.motorolasolutions.com www.motorolasolutions.com the property of their respective owners. © 2019 Motorola Solutions, Inc. All rights reserved. Bluetooth On/Off/Info Button Printed in Scan Press the On/Off/Info Button. The radio sounds and displays the battery strength level, cellular strength level, Wi-Fi strength level, software available for installation MN005691A01-AA indicator (restart to install), and radio name. When the radio displays the battery strength level, the battery strength LED status indicator lights up. *MN005691A01* SLN 1000 QUICK REFERENCE GUIDE


Document Created: 2019-05-02 20:10:43
Document Modified: 2019-05-02 20:10:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC