Manual

FCC ID: AZ489FT6023

Users Manual

Download: PDF
FCCID_4498404

MN006039A01.fm Page 1 Wednesday, October 30, 2019 5:14 PM m Notice to Users (FCC and Industry Canada) Supplier’s Declaration of Conformity Class B Digital Device As a personal computer peripheral, this Per FCC CFR 47 Part 2 Section 2.1077(a) device complies with Part 15 of the FCC This device complies with part 15 of the FCC WM500 Rules and Industry Canada license-exempt Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Remote Speaker RSS standard(s). Operation is subject to the Operation is subject to the following following conditions: Microphone • This device may not cause harmful interfer- conditions: Responsible Party 1. This device may not cause harmful inter- PMMN4127_ ence. Name: Motorola Solutions, Inc. ference. • This device must accept any interference User Leaflet received, including interference that may Address: 1303 East Algonquin Road, 2. This device must accept any interference Schaumburg, IL 60196-1078, U.S.A. received, including interference that may cause undesired operation. *MN006039A01* Phone Number: 1-800-927-2744 cause undesired operation. • Changes or modifications made to this Notice: This equipment has been tested and Hereby declares that the product: device, not expressly approved by Motorola found to comply with the limits for a Class B Model Name: WM500 MN006039A01-AC Solutions, could void the authority of the user conforms to the following regulations: digital device, pursuant to part 15 of the FCC to operate this equipment. Rules. These limits are designed to provide FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate MOTOROLA, MOTO, MOTOROLA SOLUTIONS and radio frequency energy and, if not installed the Stylized M logo are trademarks or registered and used in accordance with the instructions, trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the may cause harmful interference to radio property of their respective owners. communications. However, there is no © 2019 Motorola Solutions, Inc. All rights reserved. guarantee that interference will not occur in a particular installation. Printed in If this equipment does cause harmful Avis aux utilisateurs (FCC et Industrie Déclaration de conformité du Appareil numérique de Classe B interference to radio or television reception, Canada) fourmisseur En tant que périphérique d'ordinateur which can be determined by turning the Le présent appareil est conforme aux CNR personnel, cet appareil est conforme aux equipment off and on, the user is encouraged d'Industrie Canada applicables aux appareils Règlement CFR 47 partie 2 section 2.1077(a) stipulations de la partie 15 des to try to correct the interference by one or radio exempts de licence et à la partie 15 des de la FCC règlements de la FCC. Cet appareil est more of the following measures: règlements de la FCC : conforme aux CNR d'Industrie Canada • Reorient or relocate the receiving antenna. • Cet appareil ne doit pas causer d'inter- applicables aux appareils radio • Increase the separation between the equip- férence nuisible. exempts de licence. Son utilisation est ment and receiver. • Cet appareil doit accepter toute inter- Partie responsable assujettie aux deux conditions suivantes : • Connect the equipment into an outlet on a férence reçue, y compris les interférences Nom : Motorola Solutions, Inc. 1. Cet appareil ne doit pas causer circuit different from that to which the receiver pouvant entraîner un fonctionnement indésir- Adresse : 1303 East Algonquin Road, d'interférence nuisible. is connected. able. Schaumburg, IL 60196-1078, U.S.A. 2. Cet appareil doit accepter toute • Consult the dealer or an experienced radio • Toute modification effectuée à cet appareil Numéro de téléphone : 1-800-927-2744 interférence reçue, y compris les or TV technician for help. sans l'autorisation explicite de Motorola Solu- Déclare par les présentes que le produit : interférences pouvant entraîner un tions peut annuler l'autorisation d'utiliser cet Nom de modèle : WM500 fonctionnement indésirable. appareil. sont conformes aux réglementations AVIS:Cet équipement a fait l'objet de tests et suivantes : a été déclaré conforme aux limites établies Partie 15, sous-partie B, section 15.107(a), pour un appareil numérique de classe B, 15.107(d) et section 15.109(a) des conformément à la section 15 des règlements règlements de la FCC de la FCC. Ces limites sont fixées afin d'offrir une protection suffisante contre des interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre de l'énergie de radiofréquence et, s'il n'est pas installé ou utilisé conformément aux instructions, il peut provoquer un brouillage nuisible aux RF Energy Exposure and Product • Limit the amount of time you use headsets • The Remote Speaker Microphone (RSM) communications radio. Cependant, il est Safety Guide for Portable Two-Way or earpieces at high volume. should be stored between -10 °C (14 °F) impossible de garantir qu'il n'y aura aucune Radios • When using the radio without a headset or and 30 °C (86 °F) to minimize battery interférence dans une installation particulière. earpiece, do not place the radio’s speaker permanent capacity loss. Before using this product, read the RF Energy directly against your ear. • To prevent injury, do not disassemble, Exposure and Product Safety Guide that Si cet appareil cause une interférence • If you experience hearing discomfort, puncture, or crush the RSM because this ships with the radio which contains nuisible à la réception de la radio ou de la ringing in your ears, or speeches that are action can cause the battery to short- instructions for safe usage and RF energy télévision, ce qui peut être déterminé en muffled, you should stop listening to your circuit. awareness and control for compliance with éteignant et en allumant l'appareil, vous êtes radio through your headset or earpiece, • Do not expose or throw the RSM into heat applicable standards and regulation. encouragé à remédier à la situation en and have your hearing checked by your or fire. prenant une ou plusieurs des mesures Acoustic Safety doctor. • Do not dispose the RSM into household suivantes : Exposure to loud noises from any source for Important Information waste. • Réorienter ou déplacer l'antenne extended periods of time may temporarily or • Do not fill the audio jack and USB charging réceptrice. permanently affect your hearing. The louder ! • Do not charge your accessory in temperature below 0 °C (32 °F) or port with water. If water enters the audio • Augmenter la distance entre l'équipement the radio’s volume, the less time is required C a u t i o n above 45 °C (113 °F). Do not store jack and/or USB charging port, remove et le récepteur. before your hearing could be affected. your accessory in direct sunlight or water by shaking the RSM. Always cover • Brancher l'appareil dans une autre prise Hearing damage from loud noise is where expected temperatures can the audio jack and USB charging port with sur un circuit différent de celui du récepteur. sometimes undetectable at first and can have exceed this range such as inside a parked a dust cap when not in use. • Consulter un revendeur ou un technicien a cumulative effect. To protect your hearing: car. de radio ou de télévision chevronné pour • Use the lowest volume necessary to do • Storing your fully charged accessory in obtenir de l'aide. your job. high temperature conditions may • Turn up the volume only if you are in noisy permanently reduce the life of the internal surroundings. battery. • Turn down the volume before connecting • Battery life may temporarily shorten in low- headset or earpiece. temperature conditions. RSM Overview Radio/Device Compatibility Table 1: RSM Overview and Description • LEX Series • SLN 1000 1 No. Description • TLK 100 2 1 Volume toggle • Other compatible non-Motorola Solutions 11 2 Power Indicator devices 12 16 3 Power button Push-To-Talk (PTT) button (for group Table 2: Compatible Parts and Accessories 3 4 10 call) Part Number Description 5 Answer/End-Call button (for private call) 15 PMLN7560_ Receive-only earpiece with 6 P1 Programmable button translucent tube 4 6 7 Channel Down button DRAFT 13 42009312001 8 Channel Up button Belt Clip 7 4205823V01 9 P4 Programmable button CB000756A01 USB-C Cable (1 m) 8 10 Audio/Bluetooth Indicator 5 11 Emergency button • These accessories can be paired with a Kodiak 9 Broadband PTT enabled device. Currently, the 12 Microphone supported Kodiak feature is Operational Status 14 Messaging (the additional features will be added 13 Speaker in the future), please refer to your Kodiak User 14 Charging port Guide for setup instructions. 15 NFC Location • The MAC Address is located behind the belt 16 Audio jack clip and on top of individual box. • Additional MAC Address labels are provided in the individual box.

MN006039A01.fm Page 2 Wednesday, October 30, 2019 5:14 PM Getting Started When RSM is not charging, read the following Read the following table to understand the Short press the Power button to determine the Before you start, fully charge the RSM. To table to understand the indication. audio and Bluetooth status indication. details status of the RSM. charge, connect the USB charging cable to Table 4: Battery Indication Table 5: Audio and Bluetooth Status Table 6: Status Indication the RSM and plug it to an appropriate power Power outlet. Description Audio/ Indicator Status Description Indication Bluetooth Description Audio/ Double-blinking Table 3: Charging Indicator Behavior Rapid blinking Battery level is critically Indication Connected red low Bluetooth blue Power Indicator Description Blinking in blue Enter pairing Double blinking Battery level Blinking red Battery level is low Blinking reda Battery is low Solid blue Disconnected green is high Offa Battery is medium or high Power Solid red Battery is charging Double blinking Double-blinking Battery level Connected a. Press the Power button to get the status. blue (Once) amber is medium Solid green Battery is fully charged Solid red Mic muted Blinking green More than 90% charged Blinking in red Voice prompt/Tone mute Rapid blinking Charging error Blinking in green Receiving incoming call red a. Charge the RSM immediately to prevent flat- battery condition. Table 7: WM500 RSM Button Operations (Continued) Table 7: WM500 RSM Button Operations Button State Short Press Long Press (>1.5 s) Very Long Press (>3s) Button State Short Press Long Press (>1.5 s) Very Long Press (>3s) Decrease volume by Off N/A Power On Enter pairing Connected Volume ramp down Power one step On RSM turns on N/A Power off Voice Prompt/ Volume- Connected PTT for Kodiak Group Call Tone unmuted PTT Mute voice prompt/Tone Not connected Kodiak pairing N/A N/A at minimum volume Power on and clear Power+PTT Off N/A N/A PDL Power+Call On N/A N/A Enter/Exit Dark Mode button Not connected Switches language N/A N/A Call Button Incoming call Answer call Reject call N/A On call Mic Mute End call N/A Volume increase by Connected Volume ramp up one step Volume+ Voice prompt/ Unmute voice prompt/Tone Tone muted Pairing the RSM through Bluetooth Unpairing the RSM Service and Warranty Warranty Exclusion 1. While RSM is power off, press and hold the 1. While RSM is power off, press and hold the Other than the clip, the RSM is not repairable. Motorola Solutions does not warrant the Power button until you hear “Power On” Power button and PTT buttons. The RSM is covered under the standard Motorola installation, maintenance or service of the followed by “Searching for Host”, and the blue 2. The blue LED blinks and a voice prompt from Solutions one-year limited warranty. Product, accessories, batteries or parts. Motorola LED blinks. the RSM indicates that the paired device is Solutions will not be responsible in any way for 2. From the compatible device, search and “Cleared”. problems or damage caused by any ancillary select “WM500” from the Bluetooth list. equipment or peripherals (specific examples 3. Once the devices are paired successfully, a include, but are not limited to: batteries, chargers, tone is played. adapters, and power supplies) not furnished or 4. A voice prompt from the RSM indicates that manufactured by Motorola Solutions which is the device is “Connected”. attached to or used in connection with the 5. For iPhone, choose RSM from the Bluetooth Product. When the Product is used in conjunction list and pair again for second time. with ancillary or peripheral equipment not supplied by Motorola Solutions, Motorola Pairing the RSM through NFC Solutions does not warrant the operation of the 1. While RSM is power off, press and hold the Product/peripheral combination and Motorola Power button until you hear “Power On” Solutions will not honor any warranty claim where followed by “Searching for Host”, and the blue the Product is used in such a combination and it LED blinks. is determined by Motorola Solutions that there is 2. Align the NFC locations on both the RSM and no fault with the Product. Upon open or dismantle the compatibles devices. the Product, warranty is immediately voided. 3. Check the compatible device for indication of Motorola Solutions specifically disclaim any successful pairing. responsibility for any damage in any way caused by improper installation by un-authorized personnel. Open Source Software Legal Notices Recommended Wearing Position Refer to the Best Practices for Motorola NOTES This product contains Open Source Software. For Solutions’ Law Enforcement RSM at: information regarding licenses, https://www.youtube.com/watch?v=82OvxqI0Vco acknowledgments, required copyright notices, and other usage terms, visit http:// businessonline.motorolasolutions.com. Go to Resource Center > Product Information > Manual > Accessories > Remote Speaker Microphones FCC ID: AZ489FT6023 DRAFT IC: 109U-89FT6023 Note: For better performance, wear the RSM and the device on the same side.


Document Created: 2019-10-30 17:15:36
Document Modified: 2019-10-30 17:15:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC