RF exposure letter

FCC ID: AWA-NYNEB6

RF Exposure Info

Download: PDF
FCCID_4277257

FCC ID: AWA-NYNEB6 FCC RF EXPOSURE REPORT NYNE MULTIMEDIA INC. Bluetooth Speaker Model Number: NYNE B6 Additional Model: NYNE PUNCH FCC ID: AWA-NYNEB6 Prepared for: NYNE MULTIMEDIA INC. 3451 LUNAR COURT, OXNARD, California, United States. 93030 Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R1904097 Date of Test: Mar. 20~Apr. 25, 2019 Date of Report: Apr. 26, 2016 EST Technology Co., Ltd Report No. ESTE-R1904097 Page 1 of 3

FCC ID: AWA-NYNEB6 1. Reference KDB 447498 v06 2. EXPOSURE EVALUATION OF PORTABLE OR MOBILE DEVICES Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. 3．SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and ≤50mm The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. EST Technology Co., Ltd Report No. ESTE-R1904097 Page 2 of 3

FCC ID: AWA-NYNEB6 4. EVALUATION RESULTS Peak output Power Peak output Power Target power Mode CH Results （dBm） （mW） (dBm) 2402 2.32 1.706 2±1 0.618 GFSK 2441 2.27 1.687 2±1 0.623 2480 2.14 1.637 2±1 0.628 2402 3.06 2.023 3±1 0.779 π/4-DQPSK 2441 2.99 1.991 2±1 0.623 2480 2.85 1.928 2±1 0.628 Note: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required. ====END==== EST Technology Co., Ltd Report No. ESTE-R1904097 Page 3 of 3


Document Created: 2019-05-15 11:06:43
Document Modified: 2019-05-15 11:06:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC